Set up and scale MPI applications on H4D VMs with Cloud RDMA

H4D instances on Google Cloud are optimized for High Performance Computing (HPC) workloads and feature Cloud RDMA technology to deliver low-latency, high-bandwidth inter-node communication. This guide provides procedures for setting up and configuring Message Passing Interface (MPI) libraries to take advantage of Cloud RDMA on your H4D clusters. It also provides best practices for compiling and scaling your MPI applications on H4D instances.

Before you begin

Before you attempt any of the tasks in this guide, you must meet the following prerequisites:

You have configured a Virtual Private Cloud (VPC) network and subnet enabled for Cloud RDMA .
Increase memory lock and open file limits .

Overview of configuration steps

This page shows how to configure an H4D cluster for your MPI applications by completing the following steps:

Create a cluster using Cluster Toolkit.
Set up the MPI library.
Configure the guest OS environment.
Optimize and scale MPI with Cloud RDMA.
Use specific commands to run MPI applications.

Set up the HPC cluster and MPI with Cluster Toolkit

To set up the cluster and MPI using Cluster Toolkit, Terraform, and Slurm, complete the following steps:

Clone a GitHub repository that contains Terraform scripts for deploying a Slurm cluster, for example the GoogleCloudPlatform/cluster-toolkit/examples/hpc-slurm-h4d folder.
Modify the Terraform configuration template to match your requirements:
- Specify regions, zones, placement policies, and the H4D machine type.
- Define virtual network interfaces (vNICs). To use Cloud RDMA, each VM instance must have between 2 and 10 network interfaces: one IRDMA vNIC and between one and nine standard gVNIC network interfaces.
- Specify storage options such as Lustre, NFS, or Local SSD.
- Reference a preconfigured Slurm scheduler setup.
Create or edit a Slurm job script to define the application execution, including how to load the MPI environment.
Run Terraform to deploy the Slurm cluster based on your configuration.

The following configuration steps are handled by the startup scripts within the Cluster Toolkit blueprint, which are run during deployment:

Creates VM instances that use a pre-curated Google HPC VM image designed for H4D, which includes the necessary network tunings, Intel RDMA drivers, and ibverbs libraries.
Installs the specified MPI library, for example Intel MPI.
Installs necessary the storage client software, for example, NFS, Cloud Storage FUSE, or Lustre.

Set up the MPI library

You can use Cloud RDMA on H4D with Intel MPI or Open MPI. Your application's requirements or recommendations should determine which MPI library you use. Many applications are built and tuned for a specific MPI implementation.

Configure Intel MPI

Install the Intel MPI library on all of the nodes in the cluster.

Requirements

To successfully use Intel MPI with Cloud RDMA on H4D instances, you must use the following versions:

Intel MPI: version 2021.17.2 or later.
libfabric library: version: 2.2.0 or later.

Configuration instructions

Refer to Intel's official documentation for the latest installation procedures. If you use Cluster Toolkit, then it runs scripts that typically handle the installation.

After installation, to ensure that Intel MPI uses the Cloud RDMA interface, set the following environment variables in your job scripts or user environment:

  export 
  
 FI_PROVIDER 
 = 
 "verbs;ofi_rxm" 
 export 
  
FI_VERBS_INLINE_SIZE:  
 39 
 export 
  
FI_OFI_RXM_BUFFER_SIZE:  
 4096 
 export 
  
FI_UNIVERSE_SIZE:  
 N_MPI_RANKS

Replace N_MPI_RANKS with a value that is based on the number of H4D instances you have provisioned. For example, if you have a 16-node cluster, you would use the value 3072, which is 192 * 16 machines.

Configure Open MPI

Install the Open MPI library on all nodes in the cluster.

Requirements

To successfully use Open MPI with Cloud RDMA on H4D instances, you must use the following versions:

Open MPI: version 5.0.9 or later.
Unified Communication X (UCX) framework: version 1.20.0 or later.

Configuration instructions

To configure your instances to use Open MPI, complete the following steps:

Install the Open MPI library on all nodes in the cluster. You can often install Open MPI using system package managers or compile from source. If you use Cluster Toolkit, then it runs scripts that typically handle the installation.
Ensure your Open MPI installation is built with Unified Communication X (UCX) framework and libfabric support. Open MPI uses UCX by default in many configurations.

After installation, to ensure that Open MPI uses the Cloud RDMA interface, set the following environment variables in your job scripts or user environment:

  # Open MPI flags 
-mca  
pml  
ucx # Environment variables 
 UCX_TLS 
 = 
rc,sm UCX_UD_VERBS_TIMEOUT 
 = 
1800s UCX_RC_VERBS_TIMEOUT 
 = 
5s UCX_UD_VERBS_TIMER_TICK 
 = 
1s UCX_UD_VERBS_TX_MIN_INLINE 
 = 
 128 
 UCX_RC_VERBS_RX_QUEUE_LEN 
 = 
 32752 
 UCX_RC_VERBS_TX_POLL_ALWAYS 
 = 
y UCX_RC_VERBS_SEG_SIZE 
 = 
 4096 
 UCX_RC_VERBS_FC_WND_SIZE 
 = 
 8 
 IRDMA_TRANSPARENT_UD_QD_OVERRIDE 
 = 
 1

Replace DEVICE_NAME with the device name for the IRDMA network interface on your system, for example, mlx5_0:1 .

An example command for Open MPI resembles the following:

mpirun -mca pml ucx -x UCX_TLS=rc,sm -x UCX_UD_VERBS_TIMEOUT=1800s -x UCX_RC_VERBS_TIMEOUT=5s -x UCX_UD_VERBS_TIMER_TICK=1s -x UCX_UD_VERBS_TX_MIN_INLINE=128 -x UCX_RC_VERBS_RX_QUEUE_LEN=32752 -x UCX_RC_VERBS_TX_POLL_ALWAYS=y -x UCX_RC_VERBS_SEG_SIZE=4096 -x UCX_RC_VERBS_FC_WND_SIZE=8 -x IRDMA_TRANSPARENT_UD_QD_OVERRIDE=1

Configure the guest OS environment

After you have created the H4D instances, configure the guest environment.

Set up user limits for MPI

In the guest OS of each H4D instance, increase the memory lock and open file limits, using the values shown in the following example:

 cat << 
EOF  
 | 
  
sudo  
tee  
-a  
/etc/security/limits.conf
*  
hard  
memlock  
unlimited
*  
soft  
memlock  
unlimited
*  
hard  
nofile  
 65535 
*  
soft  
nofile  
 65535 
EOF

Set environment variables for Intel MPI

You can optionally set the following environment variables:

To pin MPI processes within NUMA nodes, potentially improving locality, set the following:
```
  export 
  
 I_MPI_PIN_DOMAIN 
 = 
numa 
```
To increase output verbosity for troubleshooting and debugging, use the following:
```
  export 
  
 I_MPI_DEBUG 
 = 
 5 
 
```

Optimize and scale MPI with Cloud RDMA

To achieve optimal performance with MPI on H4D VMs, use the following configuration steps to optimize and scale your MPI applications.

Network tuning for Cloud RDMA

Use the following information when configuring your H4D instances to use Cloud RDMA:

Interface selection: Explicitly configure your MPI library to use the IRDMA network interface for inter-node communication. This is often configured by using environment variables that select the fabric provider, for example FI_PROVIDER for MPIs based on libfabric. See Set up the MPI library .
MTU: The Falcon VPC network used with Cloud RDMA supports a large MTU size . Ensure your interface and MPI configuration take advantage of a larger MTU size to reduce overhead. If you use Cluster Toolkit to deploy your cluster, then the MTU size is set to 8896.
Buffer sizes: Tuning MPI buffer sizes can sometimes improve performance, but default settings are often a good starting point.

Adjust the SAR threshold for libfabric

When using RxM (RDM over unreliable messaging), set the segmentation and reassembly (SAR) threshold to 2147483648 (2 GB).

The SAR threshold setting determines the message size (in bytes) at which the communication protocol switches from an in-order messaging protocol (also called eager ) to the rendezvous protocol.

The rendezvous protocol is used to avoid excessive buffering by requiring a handshake between the sender and receiver before transferring data directly from the source to the destination buffer. The rendezvous protocol is generally used for larger messages to avoid consuming excessive memory buffers on the receiving side.

The default value for the SAR threshold ranges from 16 KB to 256 KB.

Except for StarCCM+ applications, use the environment variable FI_OFI_RXM_SAR_LIMIT to adjust the threshold to 2 GB.

   
 export 
  
 FI_OFI_RXM_SAR_LIMIT 
 = 
 "2147483648"

Pin MPI processes

Binding MPI processes to specific CPU cores is crucial for performance, especially on NUMA systems like H4D instances. This minimizes remote memory access and helps to ensure consistent performance.

Intel MPI: Use I_MPI_PIN_DOMAIN or related environment variables, or command-line options with mpirun like -genv I_MPI_PIN_PROCESSOR_LIST .
Open MPI: Use --map-by and --bind-to options with mpirun . For example, the following pins N processes per node to cores: --map-by ppr: N :node --bind-to core

Experiment with different pinning strategies (for example, per core or per NUMA node) based on your application's characteristics. Simultaneous multi-threading (SMT) is disabled on H4D instances, so each vCPU represents a physical core.

Optimize MPI collectives

Collective communication, such as MPI_Bcast or MPI_Allreduce , can significantly impact performance at scale.

Intel MPI: Explore environment variables like I_MPI_COLL_ALGO to select different algorithms for collectives. Intel MPI often has tuned algorithms for various message sizes and process counts.
Open MPI: Different collective algorithms can be selected through Modular Component Architecture (MCA) parameters. Open MPI's hcoll or ucx components often provide optimized collectives.

Compile applications

Compile your HPC applications with compiler flags optimized for the AMD EPYC Turin architecture .

Use modern compilers: Use recent versions of GNU compiler collection (GCC), Intel compilers, or AMD Optimizing C/C++ Compiler (AOCC), if available within your environment.
Architecture flags: Use flags like -march=znver4 for AMD EPYC Turin architecture if using GCC or AOCC.
Optimization levels: Employ appropriate optimization levels, for example -O2 , -O3 , or -Ofast .
Vectorization: Ensure vectorization is enabled, which is often the default when using optimization level -O2 or higher.
Link time optimization (LTO): Consider using LTO with flags like -flto .

Optimize application scaling

Load Balancing: Ensure work is evenly distributed across MPI processes.
Communication Patterns: Analyze and optimize communication patterns to reduce synchronization overhead and latency. Use point-to-point communication instead of collectives where possible, or use non-blocking operations.
I/O: For large-scale jobs, parallel I/O solutions like Lustre or other parallel file systems accessible from your cluster are critical to avoid bottlenecks. H4D supports Hyperdisk Balanced disks with capped performance; for I/O intensive needs, Local SSD or Parallelstore should be considered.

Keep the drivers up to date

If you disable automatic updates on your H4D instances, then you should regularly run the dnf update command on the instance to keep the Cloud RDMA driver up to date.

Alternatively, if you used Cluster Toolkit to create your H4D instances, then you can use the install_cloud_rdma_drivers setting in the startup-script module to ensure that the latest Cloud RDMA drivers are installed on instance startup.

Run MPI applications

To run your MPI application, use the mpirun command from your chosen MPI library.

Open MPI

Create a host file that lists the network names of the H4D instances in the cluster. Then use the following command:

  # Example for Open MPI 
mpirun  
-np  
 TOTAL_PROCESSES 
  
--hostfile  
 HOST_FILE 
  
--map-by  
ppr: PROCESSES_PER_NODE 
:node  
./ YOUR_APPLICATION

Intel MPI