Set up dual-stack (IPv4 and IPv6)

Preview — Dual-stack support for App Engine

This feature is subject to the "Pre-GA Offerings Terms" in the General Service Terms section of the Service Specific Terms . Pre-GA features are available "as is" and might have limited support. For more information, see the launch stage descriptions .

Dual-stack subnets let your App Engine resources send IPv4 and IPv6 traffic to a VPC network with Direct VPC egress. You can change an existing IPv4 only (single-stack) subnet to a dual-stack subnet.

Subnet types

VPC networks support the following Compute Engine subnet types :

IPv4 only (single-stack) subnets, with only IPv4 subnet ranges
IPv4 and IPv6 (dual-stack) subnets, with both IPv4 and IPv6 subnet ranges

Dual-stack limitations

Before you change the stack type on an existing App Engine resource, consider the following limitations:

Dual-stack support is only available with subnets in a custom-mode VPC network. To have the internal access type available for dual-stack subnets, the VPC network internal IPv6 range must be enabled. Set up or convert the VPC network to custom mode.
Compared to IPv4-only subnets, dual-stack subnets might experience elevated cold-start latencies, limiting how quickly your application can scale up.
NAT64 isn't supported.

Before you begin

Be sure that the App Engine service agent has the Compute Public IP Admin role ( roles/compute.publicIpAdmin ) to use the subnet with external IPv6.

Set up a dual-stack subnet

Dual-stack subnets have both IPv4 and IPv6 address ranges.

To set up a dual-stack subnet, you can either use the Google Cloud console or the Google Cloud CLI:

Console

Go to the Google Cloud console and enable the Compute Engine API:

Enable the Compute Engine API
Navigate to the VPC networkspage:

Go to VPC networks
Click Create VPC networkif you are creating a new custom-mode network. If you are using an existing VPC network, click the name of the VPC network to show its VPC network details page.
If you are creating a new network or converting an existing one, enter the name and be sure that the Subnet creation modeis set to Custom, then select Configure a ULA internal IPv6 range for this VPC Network.
From the Subnetstab, click Add subnet. In the panel that appears:
1. Provide a Name.
2. Select a Region.
3. For IP stack type, select IPv4 and IPv6 (dual-stack).
4. Enter an IPv4 range. This is the primary IPv4 range for the subnet.
5. Select the IPv6 access type.
  
  If the Internaloption is not available and you need it, check that an internal IPv6 range is assigned on the network.
6. Click Add.

gcloud

To create a custom-mode network that supports dual-stack subnets, run the gcloud compute networks create command.

To configure internal IPv6 ranges on any subnets in this network, use the --enable-ula-internal-ipv6 flag. This option assigns a /48 ULA prefix from within the fd20::/20 range used by Google Cloud for internal IPv6 subnet ranges.
```
gcloud  
compute  
networks  
create  
 NETWORK 
  
 \ 
  
--subnet-mode = 
custom  
 \ 
  
--enable-ula-internal-ipv6
```
Replace NETWORK with the name of the VPC network that will contain the new subnet.
To convert to or update a custom-mode network so that it supports dual-stack subnets, run the following command:
```
gcloud  
compute  
networks  
update  
 NETWORK 
  
 \ 
  
--switch-to-custom-subnet-mode  
 \ 
  
--enable-ula-internal-ipv6
```
Replace NETWORK with the name of the VPC network that will contain the new subnet.
To create a dual-stack subnet with an IPv6 range, run the subnets create command using the dual-stack settings:
```
gcloud  
compute  
networks  
subnets  
create  
 SUBNET 
  
 \ 
  
--network = 
 NETWORK 
  
 \ 
  
--range = 
 PRIMARY_IPv4_RANGE 
  
 \ 
  
--stack-type = 
IPV4_IPV6  
 \ 
  
--ipv6-access-type = 
 IPV6_ACCESS_TYPE 
  
 \ 
  
--region = 
 REGION 
```
Replace the following:
- SUBNET : a name for the new subnet.
- NETWORK : the name of the VPC network that will contain the new subnet.
- PRIMARY_IPv4_RANGE : the primary IPv4 range for the new subnet, in CIDR notation. For more information, see IPv4 subnet ranges .
- IPV6_ACCESS_TYPE : the IPv6 access type for the new subnet, either internal or external .
- REGION : the Google Cloud region that the new subnet will be created in.

Add the dual-stack subnet to an App Engine resource

After you create a dual-stack subnet, configure your App Engine service to use the subnet:

In your app.yaml file, specify the network and subnet in the vpc_access field:
```
 vpc_access 
 : 
  
 network_interface 
 : 
  
 network 
 : 
  
  NETWORK 
 
  
 subnet 
 : 
  
  SUBNET 
 
  
 vpc_egress 
 : 
  
  EGRESS_SETTING 
 
```
Replace the following:
- NETWORK : the name of network you created in the previous step.
- SUBNET : the name of the subnet you created in the previous step.
- Optional: EGRESS_SETTING : controls how outbound traffic is routed. This field supports the following configuration settings:
  - all-traffic : All outbound requests are routed through the VPC network.
  - private-ranges-only (default): Only traffic to internal IP addresses is routed through the VPC network. Internet traffic uses the default App Engine path.
Deploy to App Engine by running the following command:
```
gcloud  
beta  
app  
deploy
```

Change a subnet from single-stack to dual-stack

To add an IPv6 subnet range to an existing IPv4-only subnet in a custom-mode VPC network, see Change a subnet's stack type to dual-stack . Then, deploy the App Engine service on the dual-stack subnet.

Change a subnet from dual-stack to single-stack

To change a resource's dual-stack subnet to a single-stack subnet, see Change a dual-stack subnet to IPv4 only . Then, deploy the App Engine service on the dual-stack subnet.

Verify the network and subnet

To check that your resource is on the VPC network, run the following command:

gcloud  
beta  
app  
versions  
describe  
 VERSION 
  
--service = 
 SERVICE

Replace the following:

VERSION : the deployed version of your service
SERVICE : the deployed service

The following example output shows your network and subnet:

 vpcAccess:
  networkInterfaces:
  - network: projects/ YOUR_PROJECT 
/global/networks/ YOUR_NETWORK 
subnet: projects/ YOUR_PROJECT 
/regions/ YOUR_REGION 
/subnetworks/ YOUR_SUBNET 
vpcEgress: ALL_TRAFFIC/PRIVATE_RANGES_ONLY

Set up dual-stack (IPv4 and IPv6) Stay organized with collections Save and categorize content based on your preferences.