Editor add-on authorization

Page Summary

outlined_flag

• Editor add-ons have a complex authorization model because they can be installed by one user and used by collaborators in shared files, requiring different levels of data access.

• Add-ons operate in different authorization modes ( NONE , LIMITED , FULL ) which dictate the services they can access depending on the user's interaction with the add-on.

• The onOpen() function has limited functionality in certain authorization modes to protect user data; sensitive actions require user interaction to trigger AuthMode.FULL .

• To ensure your add-on's menu renders correctly, avoid using restricted services in onOpen() when the authorization mode is NONE , and move those calls to functions triggered by user interactions.

• When an add-on is installed, onInstall() runs in AuthMode.FULL allowing for complex setup routines and menu creation, which should be leveraged for tasks restricted in other modes.

Authorization for many Google Apps Script apps is straightforward. The script project asks for any missing permissions it needs when someone attempts to use it.

The authorization model for Editor add-ons is more complex for several reasons:

• When a user creates a file, all the add-ons the user installs are listed in the Extensionsmenu, even if the user hasn't authorized those add-ons yet.

• These add-ons work on files in Google Drive that can be shared with collaborators. Collaborators who don't have the Editor add-on installed see it in documents where the file creator used it.

• Editor add-ons automatically run their onOpen functions when a document opens.

To protect user data, authorization modes are applied that make some services unavailable to onOpen . This guide explains what your code can do and when.

Authorization model

The authorization mode of an Editor add-on depends on its state, which depends on who is using it: the user who installed the add-on or a collaborator.

Editor add-on states

Editor add-ons in the Extensionsmenu are installed, enabled, or both:

• An add-on is installed for a particular user after they or their administrator get it from the Google Workspace Marketplace and authorize it to access their Google data.
• An add-on is enabled in a document, form, presentation, or spreadsheet when anyone uses it there.
• When people collaborate on a file and one of them uses an add-on, it's installed for that user and enabled for the file.

The following table summarizes the differences between installed and enabled. When you test a script as an add-on , you can run the test in either or both states.

Authorization modes

The onOpen function of an Editor add-on runs automatically when a user opens a document, form, presentation, or spreadsheet. To protect users' data, Apps Script restricts what the onOpen function can do. The Editor add-on state determines which authorization mode the onOpen function runs in.

If an Editor add-on is enabled in the file, form, presentation, or spreadsheet, onOpen runs in AuthMode.LIMITED . If the add-on isn't enabled and is only installed , onOpen runs in AuthMode.NONE .

In AuthMode.NONE , an add-on can't run certain services until the user interacts with the add-on by clicking or running custom functions. If your add-on tries to use these services in onOpen , onInstall , or global scope, permissions fail and other calls, such as filling in menus, stop. Help is the only supported option.

To run restricted service calls, you must use the AuthMode.FULL authorization mode. User interaction functions, such as clicking a menu option, run only in this mode. After the code is run in AuthMode.FULL mode, the add-on can use all authorized scopes.

Only published Editor add-ons can be in AuthMode.NONE ; unpublished Editor add-ons run onOpen in AuthMode.LIMITED . However, intended in either authorization mode. To do this, test an Editor add-on .

Apps Script passes the authorization mode as the authMode property of the Apps Script event parameter , e ; the value of e.authMode corresponds to a constant in the Apps Script ScriptApp.AuthMode enum.

Authorization modes apply to all Apps Script execution methods, including running from the script editor, from a menu item, or from an Apps Script google.script.run call. However, the e.authMode property can only be inspected if the script runs as the result of a trigger such as onOpen , onEdit or onInstall . Custom functions in Google Sheets use their own authorization mode, AuthMode.CUSTOM_FUNCTION , which is similar to LIMITED but has slightly different restrictions. For all other cases, scripts run in AuthMode.FULL , as described in the following table.

Authorization lifecycle of an Editor add-on

When an add-on is installed for the current user or enabled in the current file, the add-on is loaded for the document, form, presentation, or spreadsheet when that file is opened. The add-on is listed in the Extensionsmenu and starts listening for the simple triggers onInstall , onOpen , and onEdit . If a user clicks an Extensionsmenu item, it runs.

The Editor add-on is installed

When an Editor add-on is installed from the store, its onInstall function runs in AuthMode.FULL . In this authorization mode, the add-on can run a complex setup routine. You should also use onInstall to create menu items, since the document, form, presentation, or spreadsheet is already open and your onOpen function hasn't run. The following sample shows how to call the onOpen function from the onInstall function:

  function 
  
 onInstall 
 ( 
 e 
 ) 
  
 { 
  
 onOpen 
 ( 
 e 
 ); 
  
 // Perform additional setup as needed. 
 } 
 

The Editor add-on is opened

When a document, form, presentation, or spreadsheet opens, it loads every Editor add-on that the current user has installed or that any collaborator has enabled in the file, and calls each of their onOpen functions. The authorization mode that onOpen runs in depends on whether an add-on is installed or enabled.

If an add-on only creates a basic menu, the mode doesn't matter. The following sample shows a basic onOpen function:

  function 
  
 onOpen 
 ( 
 e 
 ) 
  
 { 
  
 SpreadsheetApp 
 . 
 getUi 
 (). 
 createAddonMenu 
 () 
  
 // Or DocumentApp. 
  
 . 
 addItem 
 ( 
 'Insert chart' 
 , 
  
 'insertChart' 
 ) 
  
 . 
 addItem 
 ( 
 'Update charts' 
 , 
  
 'updateCharts' 
 ) 
  
 . 
 addToUi 
 (); 
 } 
 

To add dynamic menu items based on stored Apps Script properties , to read the contents of the current file, or to perform other advanced tasks, you must identify the authorization mode and handle it appropriately.

The following sample shows an advanced onOpen function that changes its action based on the authorization mode:

  function 
  
 onOpen 
 ( 
 e 
 ) 
  
 { 
  
 var 
  
 menu 
  
 = 
  
 SpreadsheetApp 
 . 
 getUi 
 (). 
 createAddonMenu 
 (); 
  
 // Or DocumentApp. 
  
 if 
  
 ( 
 e 
 && 
 e 
 . 
 authMode 
  
 == 
  
 ScriptApp 
 . 
 AuthMode 
 . 
 NONE 
 ) 
  
 { 
  
 // Add a normal menu item (works in all authorization modes). 
  
 menu 
 . 
 addItem 
 ( 
 'Start workflow' 
 , 
  
 'startWorkflow' 
 ); 
  
 } 
  
 else 
  
 { 
  
 // Add a menu item based on properties (doesn't work in AuthMode.NONE). 
  
 var 
  
 properties 
  
 = 
  
 PropertiesService 
 . 
 getDocumentProperties 
 (); 
  
 var 
  
 workflowStarted 
  
 = 
  
 properties 
 . 
 getProperty 
 ( 
 'workflowStarted' 
 ); 
  
 if 
  
 ( 
 workflowStarted 
 ) 
  
 { 
  
 menu 
 . 
 addItem 
 ( 
 'Check workflow status' 
 , 
  
 'checkWorkflow' 
 ); 
  
 } 
  
 else 
  
 { 
  
 menu 
 . 
 addItem 
 ( 
 'Start workflow' 
 , 
  
 'startWorkflow' 
 ); 
  
 } 
  
 } 
  
 menu 
 . 
 addToUi 
 (); 
 } 
 

When the onOpen function runs, the entire script loads and global statements run under the same authorization mode as onOpen . If the authorization mode prohibits the global statements, both the global statements and onOpen fail to run. If the published add-on fails to add its menu items, review the browser console to see if an error was returned. Then, examine your script to see whether the onOpen function or global variables call services that aren't allowed in AuthMode.NONE .

Add-ons can't open sidebars or dialogs while executing in AuthMode.LIMITED . You can use menu items to open sidebars and dialogs since these run in AuthMode.FULL .

A user runs the Editor add-on

When a user clicks an Extensionsmenu item, Apps Script first checks whether the user has installed the add-on and prompts them to do so if not. If the user has authorized the add-on, the script runs the function that corresponds to the menu item in AuthMode.FULL . The add-on is enabled in the document, form, presentation, or spreadsheet if it wasn't already.

Troubleshoot add-on menus not rendering

Your add-on menu might not render if your code doesn't manage the authorization modes correctly. For example:

• An add-on tries to run an Apps Script service that isn't supported by the current authorization mode.

• An add-on tries to run a service call before a user interacts with it.

To remove or rearrange a service call that's causing permission errors in AuthMode.NONE , try the following actions:

1. Open the Apps Script project for your add-on and locate the onOpen function.
2. Search the onOpen function for mentions of Apps Script services or objects associated with them, such as PropertiesService , SpreadsheetApp or GmailApp .
3. If a service is used for anything other than creating the UI elements, remove it or wrap it in a comment block. Leave only these methods: .getUi , .createMenu , .addItem , and .addToUi . Also find and remove any service that is outside a function.
4. Identify functions that could contain the lines of code commented or removed in the previous step, particularly those that use the information they produce, and move the service calls to the functions that need them. Rearrange or rewrite your codebase to accommodate the changes made in the previous steps.
5. Save the code and create a test deployment. When you create a test deployment, ensure that the Configfield is Installed for current userand that the text below the Config box says Test in AuthMode.NONE .
6. Launch the test deployment and open the Extensionsmenu.
7. If all menu items are displayed, the problem is fixed. If you only see the Helpmenu, go back to step 1. You might have missed a service call.

Related topics

• Web Apps
• Add-on types
• Test an Editor add-on