View router details

This page describes how to view the following Cloud Router details:

The status of the Cloud Router's BGP sessions
The Cloud Router BGP timers
Bidirectional Forwarding Detection (BFD) settings
Route advertisement mode
The base advertised route priority that Cloud Router uses for calculating route metrics

All routes for a BGP session use the same base advertised route priority. For more information, see Advertised priority .

For more information about troubleshooting, see the following:

Before you begin

gcloud

If you want to use the command-line examples in this guide, do the following:

Install or update to the latest version of the Google Cloud CLI .
Set a default region and zone .

API

If you want to use the API examples in this guide, set up API access .

View Cloud Router status and routes

To view Cloud Router status and routes, do the following:

Console

Check the status of a BGP session

In the Google Cloud console, go to the Cloud Routerspage.

Go to Cloud Routers
View the BGP sessionscolumn.
- A green circle with a checkmark indicates that the session is established.
- A red circle with an exclamation mark indicates that the session is still coming up or has already failed.
For more information, hold the pointer over the exclamation mark. If the session is still coming up, wait a few minutes, and then reload the page to verify that the session has been established. If the session failed, view the logs to see information about the session. For more information, see View logs and metrics .

View the routes that your router has advertised

In the Google Cloud console, go to the Cloud Routerspage.

Go to Cloud Routers
Click the name of your router to open the Router detailspage.
Under BGP sessions, click the name of the BGP session that you want to see advertised routes for.
On the BGP session detailspage, see the Advertised routessection.

View the dynamic routes that your Cloud Router has learned in the network

In the Google Cloud console, go to the VPC Routespage.

Go to VPC Routes
Select Dynamic.

Determine the BGP peer keepalive interval setting

In the Google Cloud console, go to the Cloud Routerspage.

Go to Cloud Routers
Click the router whose information you want to view.
View the setting on the Router detailspage under BGP peer keepalive interval.

Check the status of a BFD session

In the Google Cloud console, go to the Cloud Routerspage.

Go to Cloud Routers
Click the router whose information you want to view.
On the Router detailspage, under BGP sessions, you can determine if BFD is enabled and which BFD session initialization mode is set.

gcloud

Run the get-status command and pass the name of the router. The command returns the router's status, advertised routes, and learned routes.
```
gcloud compute routers get-status ROUTER_NAME 
\
   --project= PROJECT_ID 
\
   --region= REGION 
```
Replace the following:
- ROUTER_NAME : the name of the Cloud Router
- PROJECT_ID : the project that contains your Cloud Router
- REGION : the region that contains your Cloud Router

The output is similar to the following:

kind: compute#routerStatusResponse
result:
  bestRoutes:
  — creationTimestamp: '2019-04-17T07:16:12.789-07:00'
    destRange: 192.168.1.0/24
    kind: compute#route
    nextHopIp: 169.254.0.2
    priority: 100
  — creationTimestamp: '2019-04-17T07:16:12.789-07:00'
    destRange: 192.168.2.0/24
    kind: compute#route
    nextHopIp: 169.254.0.2
    priority: 338
  bestRoutesForRouter:
  — creationTimestamp: '2019-04-17T07:15:42.012-07:00'
    destRange: 192.168.1.0/24
    kind: compute#route
    nextHopIp: 169.254.0.2
    priority: 100
  — creationTimestamp: '2019-04-17T07:15:42.014-07:00'
    destRange: 192.168.2.0/24
    kind: compute#route
    nextHopIp: 169.254.0.2
    priority: 338
  bgpPeerStatus:
  — advertisedRoutes:
    — destRange: 10.0.1.0/24
      kind: compute#route
      nextHopIp: 169.254.0.1
      priority: 100
    — destRange: 10.0.2.0/24
      kind: compute#route
      nextHopIp: 169.254.0.1
      priority: 340
  bfdStatus:
   bfdSessionInitializationMode: ACTIVE
      configUpdateTimestampMicros: '1615561369012381'
      controlPacketCounts:
        numRx: 64014
        numRxRejected: 0
        numRxSuccessful: 64014
        numTx: 63994
      controlPacketIntervals:
      — avgMs: '263'
        duration: MINUTE
        maxMs: '299'
        minMs: '225'
        numIntervals: '227'
        type: TRANSMIT
      — avgMs: '262'
        duration: MAX
        maxMs: '4467'
        minMs: '0'
        numIntervals: '63993'
        type: TRANSMIT
      — avgMs: '261'
        duration: MINUTE
        maxMs: '1000'
        minMs: '176'
        numIntervals: '228'
        type: RECEIVE
      localDiagnostic: NO_DIAGNOSTIC
      localState: UP
      negotiatedLocalControlTxIntervalMs: 1000
      rxPacket:
        authenticationPresent: false
        controlPlaneIndependent: false
        demand: false
        diagnostic: NO_DIAGNOSTIC
        final: false
        length: 24
        minEchoRxIntervalMs: 0
        minRxIntervalMs: 1000
        minTxIntervalMs: 1000
        multiplier: 5
        multipoint: false
        myDiscriminator: 313496190
        poll: false
        state: UP
        version: 1
        yourDiscriminator: 369987665
      txPacket:
        authenticationPresent: false
        controlPlaneIndependent: false
        demand: false
        diagnostic: NO_DIAGNOSTIC
        final: false
        length: 24
        minEchoRxIntervalMs: 0
        minRxIntervalMs: 1000
        minTxIntervalMs: 1000
        multiplier: 5
        multipoint: false
        myDiscriminator: 369987665
        poll: false
        state: UP
        version: 1
        yourDiscriminator: 313496190
      uptimeMs: '16812601'
  enableIpv6: true
  ipAddress: 169.254.0.1
  ipv6NexthopAddress: 2600:2d00:0:0:0:0:1:5
  linkedVpnTunnel: https://www.googleapis.com/compute/projects/ PROJECT_ID 
/regions/us-central1/vpnTunnels/vpn-1-tunnel-1
  name: mysession2
  numLearnedRoutes: 2
  peerIpAddress: 169.254.0.2
  peerIpv6NexthopAddress: 2600:2d00:0:0:0:0:1:4
  state: Established
  status: UP
  uptime: 2 days, 3 hours, 37 minutes, 0 seconds
  uptimeSeconds: '185820'
network: https://www.googleapis.com/compute/kind: compute#routerStatusResponse

result.bestRoutes lists the best dynamic routes for this Cloud Router's VPC network in the same region as this Cloud Router. The list consists of the best routes per prefix that are programmed into this region's VPC data plane. When global dynamic routing mode is turned on in the VPC network, this list can include cross-region dynamic routes from Cloud Routers in other regions.

result.bestRoutesForRouter lists the best BGP routes learned by this Cloud Router. It is possible that routes listed might not be programmed into the data plane if the Google Cloud control plane finds a more optimal route for a prefix than a route learned by this Cloud Router.

API

Use the routers.getRouterStatus method:

GET https://compute.googleapis.com/compute/v1/projects/ PROJECT_ID 
/regions/ REGION 
/routers/ ROUTER_NAME 
/getRouterStatus

Replace the following:

PROJECT_ID : the project that contains the Cloud Router
REGION : the region where the Cloud Router is located
ROUTER_NAME : the name of the Cloud Router

View BGP session configuration

To view the configuration for an existing BGP session, follow these steps.

Console

In the Google Cloud console, go to the Cloud Routerspage.

Go to Cloud Routers
From the list of routers, select the router with the BGP session that you want to view.
View the BGP sessionssection to see the details of your Cloud Router's BGP sessions.

gcloud

Run the describe command and pass the name of the Cloud Router.
```
gcloud compute routers describe ROUTER_NAME 
\
  --project PROJECT_ID 
\
  --region REGION 
```
Replace the following:
- ROUTER_NAME : the name of the Cloud Router
- PROJECT_ID : the project that contains your Cloud Router
- REGION : the region where the Cloud Router is located

In the output, view the bgpPeers section:

bgp:
    advertiseMode: DEFAULT
    asn: 65001
    keepaliveInterval: 120
  bgpPeers:
  — advertiseMode: DEFAULT
    bfd:
     minReceiveInterval: 1000
     minTransmitInterval: 1000
     mode: ACTIVE
     multiplier: 5
    enable: 'TRUE'
    enableIpv6: true
    interfaceName: if-mysession2
    ipAddress: 169.254.0.1
    ipv6NexthopAddress: 2600:2d00:0:0:0:0:1:5
    name: mysession2
    peerAsn: 65002
    peerIpAddress: 169.254.0.2
    peerIpv6NexthopAddress: 2600:2d00:0:0:0:0:1:6
  creationTimestamp: '2019-03-15T13:48:12.433-07:00'
  description: ''
  id: '1234567890123456789'
  interfaces:
  — ipRange: 169.254.0.1/30
  linkedVpnTunnel: https://www.googleapis.com/compute/projects/ PROJECT_ID 
/regions/us-central1/vpnTunnels/vpn-1-tunnel-1
  name: if-mysession2
  kind: compute#router
  name: ROUTER_NAME 
network: https://www.googleapis.com/compute/projects/ PROJECT_ID 
/global/networks/network-a
  region: https://www.googleapis.com/compute/projects/ PROJECT_ID 
/regions/us-central1
  selfLink: https://www.googleapis.com/compute/projects/ PROJECT_ID 
/regions/us-central1/routers/ ROUTER_NAME 
selfLinkWithId: https://www.googleapis.com/compute/projects/ PROJECT_ID 
/regions/us-central1/routers/7114728016518951267

API

Use the routers.get method:

GET https://compute.googleapis.com/compute/v1/projects/ PROJECT_ID 
/regions/ REGION 
/routers/ ROUTER_NAME

Replace the following:

PROJECT_ID : the project that contains the Cloud Router
REGION : the region where the Cloud Router is located
ROUTER_NAME : the name of the Cloud Router

The bgpPeers[] field in the output contains the configuration for each BGP session.

What's next

Update the base advertised route priority
To update advertised routes, see Advertised routes .
For information about BGP session states, see BGP session states .