Console
    Start free

    Configure floor settings

    This document describes how to view and update Model Armor floor settings and provides an example of a floor setting violation.

    Floor settings serve two primary purposes:

    • Template conformance : Ensure new templates are at least as restrictive as those defined in the floor settings. Template conformance is defined at the organization and folder levels.

    • Inline enforcement : Apply Model Armor protections to Gemini models and Google Cloud MCP servers. Inline enforcement is configured at the project level. If you use floor settings for inline enforcement, template conformance is required.

    Before you begin

    Before you begin, complete the following tasks.

    Obtain the required permissions

    To get the permissions that you need to manage floor settings, ask your administrator to grant you the Model Armor Floor Setting Admin ( roles/modelarmor.floorSettingsAdmin ) IAM role on Model Armor floor settings. For more information about granting roles, see Manage access to projects, folders, and organizations .

    You might also be able to get the required permissions through custom roles or other predefined roles .

    Enable APIs

    You must enable Model Armor APIs before you can use Model Armor.

    Console

    1. Enable the Model Armor API.

      Roles required to enable APIs

      To enable APIs, you need the Service Usage Admin IAM role ( roles/serviceusage.serviceUsageAdmin ), which contains the serviceusage.services.enable permission. Learn how to grant roles .

      Enable the API

    2. Select the project where you want to activate Model Armor.

    gcloud

    Before you begin, follow these steps using the Google Cloud CLI with the Model Armor API:

    1. In the Google Cloud console, activate Cloud Shell.

      Activate Cloud Shell

      At the bottom of the Google Cloud console, a Cloud Shell session starts and displays a command-line prompt. Cloud Shell is a shell environment with the Google Cloud CLI already installed and with values already set for your current project. It can take a few seconds for the session to initialize.

    2. Run the following command to use the global API endpoint:

      gcloud  
config  
 set 
  
api_endpoint_overrides/modelarmor  
 "https://modelarmor.googleapis.com/"

    Floor settings application

    Local settings are always applied. For example, if floor settings conflict, the settings lower in the resource hierarchy take precedence. Similarly, project-level floor settings override conflicting folder-level floor settings.

    The following table lists how floor settings are applied at different locations:

    Floor settings location Application
    Organization level Applies to everything within the organization.
    Folder level Applies to all projects inside that specific folder.
    Project level Applies only to that one specific project.

    To illustrate how floor settings are applied when set at different levels, consider the following example scenario. For example, suppose you set floor settings as follows:

    • Folder-level (less specific) floor settings: All content in this folder must enable a malicious URI filter.
    • Project-level (more specific) floor settings: Your project in the folder must use prompt injection and jailbreak detection with medium confidence.

    In this scenario, the settings result in the following:

    • Any template you create in your project must include the prompt injection and jailbreak detection filter because the project-level settings always take precedence over folder-level settings.

    • A template created in a different project or folder isn't affected by the malicious URI filter rule from the first folder.

    Floor settings apply only within their specific location in the hierarchy, unless set at the organization level, in which case, they apply throughout the organization.

    Templates and floor settings conformance

    When a Model Armor template is created or updated, Model Armor checks whether the template's configuration conforms with the floor settings. You cannot create or update a template that's less strict than the floor settings.

    You can set floor settings at the organization, folder, and project levels. The user interface is available only at the project level and lets you inherit organization-level or folder-level settings. To set floor settings at the organization or folder level, you must use the API.

    Template conformance validates template configurations. Data inspection uses the configurations defined in a conformant template to analyze prompts or responses during runtime. The following table describes how template conformance and data inspection apply to templates and floor settings.

    Check Floor settings Templates
    Template conformance
    		 Configured at the organization, folder, or project level.

    Note: Sensitive Data Protection can be set to enforce data security policies on the templates. However, it does not validate the template conformance.

    		 Configured only at the project level.
    Data inspection
    		 Enforced only at the project level using the inspect and block mode. Enforced using REST API, Service Extensions, Gemini Enterprise, and Vertex AI.

    Integration with Vertex AI and Google Cloud MCP servers

    Model Armor integrates with Vertex AI and Google Cloud MCP servers to screen requests and responses from Gemini models and Google Cloud remote MCP servers based on the floor settings you define. You must enable Cloud Logging to view prompts and responses. For more information, see Model Armor integration with Vertex AI and Model Armor integration with Google Cloud MCP servers

    Configure floor settings

    Configure floor settings to define the minimum detection thresholds for Model Armor templates. These settings ensure that all new and modified templates meet specific requirements.

    To configure floor settings, do the following:

    1. In the Google Cloud console, go to the Model Armorpage.

      Go to Model Armor

    2. Select a project.
    3. On the Model Armorpage, go to the Floor settingstab and click Configure floor settings.
    4. On the Configure floor settingspage, select the configuration option .
    5. In the Detectionssection, configure the detection settings .
    6. Optional: If you select Sensitive Data Protection detection, configure the Sensitive Data Protection settings .

    7. In the Responsible AIsection, set the confidence level for each content filter .

    8. In the Servicessection, select the services where these floor settings apply.

    9. In the Logssection, select Enable Cloud Loggingto log all user prompts, model responses, and the floor settings detector results.

    10. Select Enable multi-language supportto use the multi-language detection settings .

    11. Click Save floor settings.

    Allow a few minutes for the changes to the floor settings to take effect.

    Define how floor settings are inherited

    When configuring floor settings, select the configuration option.

    • Inherit parent's floor settings: Inherit floor settings set earlier in the resource hierarchy. Click Save floor settingsand skip the remaining steps. To view the inherited settings, go to the Floor settingstab.

    • Custom: Define floor settings for this project. Custom settings that you define for a project override any inherited floor settings.

    • Disable: Disable any inherited floor settings. This means no detection rules apply to the Model Armor templates and Vertex AI for your Gemini workloads. Click Save floor settingsand skip the remaining steps. View the disabled status on the Floor settingstab.

    Define where floor settings are applied

    Select one of the following services where the configured floor settings apply.

    • Model Armor - Template creation & update: Model Armor checks every new and modified Model Armor template in a project to ensure that the minimum settings align with the floor settings.

    • Google MCP Server: Floor settings check requests sent to or from Google or Google Cloud remote MCP servers to ensure they meet the floor setting thresholds. For more information, see Model Armor integration with Google Cloud MCP servers ( Preview ).

    • Vertex AI: Screen requests sent to Gemini models, and then log or block requests that meet floor settings thresholds.

      If you select Vertex AI, the Vertex AIsection appears where you choose how floor settings are enforced.

      • Inspect only: Detect requests that don't meet floor settings but don't block them.
      • Inspect and block violations: Detect and block requests that don't meet the floor settings.

    View Model Armor floor settings

    View Model Armor floor settings to verify existing settings, to identify the minimum requirements for your AI applications, or to troubleshoot issues when a template is not behaving as expected.

    Run the following command to view the Model Armor floor settings.

    Console

    1. In the Google Cloud console, go to the Model Armorpage.

      Go to Model Armor

    2. Verify that you are viewing the project that you activated Model Armor on.

    3. On the Model Armorpage, go to the Floor settingstab. If floor settings are set at the organization level, you can view them. If no floor settings are defined, you must configure them. For more information, see Configure floor settings .

    gcloud

    • View the Model Armor floor setting for a project.

        
gcloud  
model-armor  
floorsettings  
describe  
 \ 
  
--full-uri = 
 'projects/ PROJECT_ID 
/locations/global/floorSetting'

    • View the Model Armor floor setting for an organization.

        
gcloud  
model-armor  
floorsettings  
describe  
 \ 
  
--full-uri = 
 'organizations/ ORGANIZATION_ID 
/locations/global/floorSetting'

    • View the Model Armor floor setting for a folder.

        
gcloud  
model-armor  
floorsettings  
describe  
 \ 
  
--full-uri = 
 'folders/ FOLDER_ID 
/locations/global/floorSetting'

      Replace the following:

      • The ID of the project for the floor settings.
      • The ID of the folder for the floor settings.
      • The ID of the organization for the floor settings.

    REST

    • View the Model Armor floor setting for a project.

       curl 
  
 - 
 X 
  
 GET 
  
 \ 
  
 - 
 H 
  
 "Authorization: Bearer $(gcloud auth print-access-token)" 
  
 \ 
  
 - 
 H 
  
 "Content-Type: application/json" 
  
 \ 
  
 "https://modelarmor.googleapis.com/v1/projects/ PROJECT_ID 
/locations/global/floorSetting"

    • View the Model Armor floor setting for a folder.

       curl 
  
 - 
 X 
  
 GET 
  
 \ 
  
 - 
 H 
  
 "Authorization: Bearer $(gcloud auth print-access-token)" 
  
 \ 
  
 - 
 H 
  
 "Content-Type: application/json" 
  
 \ 
  
 "https://modelarmor.googleapis.com/v1/folders/ FOLDER_ID 
/locations/global/floorSetting"

    • View the Model Armor floor setting for an organization.

       curl 
  
 - 
 X 
  
 GET 
  
 \ 
  
 - 
 H 
  
 "Authorization: Bearer $(gcloud auth print-access-token)" 
  
 \ 
  
 - 
 H 
  
 "Content-Type: application/json" 
  
 \ 
  
 "https://modelarmor.googleapis.com/v1/organizations/ ORGANIZATION_ID 
/locations/global/floorSetting"

    Replace the following:

    • The ID of the project for the floor settings.
    • The ID of the folder for the floor settings.
    • The ID of the organization for the floor settings.

    C#

    To run this code, first set up a C# development environment and install the Model Armor C# SDK .

    Go

    To run this code, first set up a Go development environment and install the Model Armor Go SDK .

    • View the Model Armor floor setting for a given project.

        import 
  
 ( 
  
 "context" 
  
 "fmt" 
  
 "io" 
  
 modelarmor 
  
 "cloud.google.com/go/modelarmor/apiv1" 
  
 modelarmorpb 
  
 "cloud.google.com/go/modelarmor/apiv1/modelarmorpb" 
 ) 
 // getProjectFloorSettings gets details of a single floor setting of a project. 
 // 
 // This method retrieves the details of a single floor setting of a project. 
 // 
 // w io.Writer: The writer to use for logging. 
 // projectID string: The ID of the project. 
 func 
  
 getProjectFloorSettings 
 ( 
 w 
  
 io 
 . 
 Writer 
 , 
  
 projectID 
  
 string 
 ) 
  
 error 
  
 { 
  
 ctx 
  
 := 
  
 context 
 . 
 Background 
 () 
  
 // Create the Model Armor client. 
  
 client 
 , 
  
 err 
  
 := 
  
 modelarmor 
 . 
  NewClient 
 
 ( 
 ctx 
 ) 
  
 if 
  
 err 
  
 != 
  
 nil 
  
 { 
  
 return 
  
 fmt 
 . 
 Errorf 
 ( 
 "failed to create client: %w" 
 , 
  
 err 
 ) 
  
 } 
  
 defer 
  
 client 
 . 
  Close 
 
 () 
  
 floorSettingsName 
  
 := 
  
 fmt 
 . 
 Sprintf 
 ( 
 "projects/%s/locations/global/floorSetting" 
 , 
  
 projectID 
 ) 
  
 // Get the project floor setting. 
  
 req 
  
 := 
  
& modelarmorpb 
 . 
 GetFloorSettingRequest 
 { 
  
 Name 
 : 
  
 floorSettingsName 
 , 
  
 } 
  
 response 
 , 
  
 err 
  
 := 
  
 client 
 . 
 GetFloorSetting 
 ( 
 ctx 
 , 
  
 req 
 ) 
  
 if 
  
 err 
  
 != 
  
 nil 
  
 { 
  
 return 
  
 fmt 
 . 
 Errorf 
 ( 
 "failed to get floor setting: %w" 
 , 
  
 err 
 ) 
  
 } 
  
 // Print the retrieved floor setting using fmt.Fprintf with the io.Writer. 
  
 fmt 
 . 
 Fprintf 
 ( 
 w 
 , 
  
 "Retrieved floor setting: %v\n" 
 , 
  
 response 
 ) 
  
 return 
  
 nil 
 }

    • View the Model Armor floor setting for a given folder.

        import 
  
 ( 
  
 "context" 
  
 "fmt" 
  
 "io" 
  
 modelarmor 
  
 "cloud.google.com/go/modelarmor/apiv1" 
  
 modelarmorpb 
  
 "cloud.google.com/go/modelarmor/apiv1/modelarmorpb" 
 ) 
 // getFolderFloorSettings gets details of a single floor setting of a folder. 
 // 
 // This method retrieves the details of a single floor setting of a folder. 
 // 
 // w io.Writer: The writer to use for logging. 
 // folderID string: The ID of the folder. 
 func 
  
 getFolderFloorSettings 
 ( 
 w 
  
 io 
 . 
 Writer 
 , 
  
 folderID 
  
 string 
 ) 
  
 error 
  
 { 
  
 ctx 
  
 := 
  
 context 
 . 
 Background 
 () 
  
 // Create the Model Armor client. 
  
 client 
 , 
  
 err 
  
 := 
  
 modelarmor 
 . 
  NewClient 
 
 ( 
 ctx 
 ) 
  
 if 
  
 err 
  
 != 
  
 nil 
  
 { 
  
 return 
  
 fmt 
 . 
 Errorf 
 ( 
 "failed to create client: %w" 
 , 
  
 err 
 ) 
  
 } 
  
 defer 
  
 client 
 . 
  Close 
 
 () 
  
 // Prepare folder floor setting path/name 
  
 floorSettingsName 
  
 := 
  
 fmt 
 . 
 Sprintf 
 ( 
 "folders/%s/locations/global/floorSetting" 
 , 
  
 folderID 
 ) 
  
 // Get the folder floor setting. 
  
 req 
  
 := 
  
& modelarmorpb 
 . 
 GetFloorSettingRequest 
 { 
  
 Name 
 : 
  
 floorSettingsName 
 , 
  
 } 
  
 response 
 , 
  
 err 
  
 := 
  
 client 
 . 
 GetFloorSetting 
 ( 
 ctx 
 , 
  
 req 
 ) 
  
 if 
  
 err 
  
 != 
  
 nil 
  
 { 
  
 return 
  
 fmt 
 . 
 Errorf 
 ( 
 "failed to get floor setting: %w" 
 , 
  
 err 
 ) 
  
 } 
  
 // Print the retrieved floor setting using fmt.Fprintf with the io.Writer. 
  
 fmt 
 . 
 Fprintf 
 ( 
 w 
 , 
  
 "Retrieved folder floor setting: %v\n" 
 , 
  
 response 
 ) 
  
 return 
  
 nil 
 }

    • View the Model Armor floor setting for a given organization.

        import 
  
 ( 
  
 "context" 
  
 "fmt" 
  
 "io" 
  
 modelarmor 
  
 "cloud.google.com/go/modelarmor/apiv1" 
  
 modelarmorpb 
  
 "cloud.google.com/go/modelarmor/apiv1/modelarmorpb" 
 ) 
 // getOrganizationFloorSettings gets details of a single floor setting of an organization. 
 // 
 // This method retrieves the details of a single floor setting of an organization. 
 // 
 // w io.Writer: The writer to use for logging. 
 // organizationID string: The ID of the organization. 
 func 
  
 getOrganizationFloorSettings 
 ( 
 w 
  
 io 
 . 
 Writer 
 , 
  
 organizationID 
  
 string 
 ) 
  
 error 
  
 { 
  
 ctx 
  
 := 
  
 context 
 . 
 Background 
 () 
  
 // Create the Model Armor client. 
  
 client 
 , 
  
 err 
  
 := 
  
 modelarmor 
 . 
  NewClient 
 
 ( 
 ctx 
 ) 
  
 if 
  
 err 
  
 != 
  
 nil 
  
 { 
  
 return 
  
 fmt 
 . 
 Errorf 
 ( 
 "failed to create client: %w" 
 , 
  
 err 
 ) 
  
 } 
  
 defer 
  
 client 
 . 
  Close 
 
 () 
  
 floorSettingsName 
  
 := 
  
 fmt 
 . 
 Sprintf 
 ( 
 "organizations/%s/locations/global/floorSetting" 
 , 
  
 organizationID 
 ) 
  
 // Get the organization floor setting. 
  
 req 
  
 := 
  
& modelarmorpb 
 . 
 GetFloorSettingRequest 
 { 
  
 Name 
 : 
  
 floorSettingsName 
 , 
  
 } 
  
 response 
 , 
  
 err 
  
 := 
  
 client 
 . 
 GetFloorSetting 
 ( 
 ctx 
 , 
  
 req 
 ) 
  
 if 
  
 err 
  
 != 
  
 nil 
  
 { 
  
 return 
  
 fmt 
 . 
 Errorf 
 ( 
 "failed to get floor setting: %w" 
 , 
  
 err 
 ) 
  
 } 
  
 // Print the retrieved floor setting using fmt.Fprintf with the io.Writer. 
  
 fmt 
 . 
 Fprintf 
 ( 
 w 
 , 
  
 "Retrieved org floor setting: %v\n" 
 , 
  
 response 
 ) 
  
 return 
  
 nil 
 }

    Java

    To run this code, first set up a Java development environment and install the Model Armor Java SDK .

    • View the Model Armor floor setting for a given project.

        import 
  
 com.google.cloud.modelarmor.v1. FloorSetting 
 
 ; 
 import 
  
 com.google.cloud.modelarmor.v1. FloorSettingName 
 
 ; 
 import 
  
 com.google.cloud.modelarmor.v1. GetFloorSettingRequest 
 
 ; 
 import 
  
 com.google.cloud.modelarmor.v1. ModelArmorClient 
 
 ; 
 import 
  
 java.io.IOException 
 ; 
 public 
  
 class 
 GetProjectFloorSetting 
  
 { 
  
 public 
  
 static 
  
 void 
  
 main 
 ( 
 String 
 [] 
  
 args 
 ) 
  
 throws 
  
 IOException 
  
 { 
  
 // TODO(developer): Replace these variables before running the sample. 
  
 String 
  
 projectId 
  
 = 
  
 "your-project-id" 
 ; 
  
 getProjectFloorSetting 
 ( 
 projectId 
 ); 
  
 } 
  
 public 
  
 static 
  
  FloorSetting 
 
  
 getProjectFloorSetting 
 ( 
 String 
  
 projectId 
 ) 
  
 throws 
  
 IOException 
  
 { 
  
 // Initialize client that will be used to send requests. This client only 
  
 // needs to be created once, and can be reused for multiple requests. 
  
 try 
  
 ( 
  ModelArmorClient 
 
  
 client 
  
 = 
  
  ModelArmorClient 
 
 . 
 create 
 ()) 
  
 { 
  
 String 
  
 name 
  
 = 
  
  FloorSettingName 
 
 . 
 of 
 ( 
 projectId 
 , 
  
 "global" 
 ). 
 toString 
 (); 
  
  GetFloorSettingRequest 
 
  
 request 
  
 = 
  
  GetFloorSettingRequest 
 
 . 
 newBuilder 
 (). 
 setName 
 ( 
 name 
 ). 
 build 
 (); 
  
  FloorSetting 
 
  
 floorSetting 
  
 = 
  
 client 
 . 
 getFloorSetting 
 ( 
 request 
 ); 
  
 System 
 . 
 out 
 . 
 println 
 ( 
 "Fetched floor setting for project: " 
  
 + 
  
 projectId 
 ); 
  
 return 
  
 floorSetting 
 ; 
  
 } 
  
 } 
 }

    • View the Model Armor floor setting for a given folder.

        import 
  
 com.google.cloud.modelarmor.v1. FloorSetting 
 
 ; 
 import 
  
 com.google.cloud.modelarmor.v1. FloorSettingName 
 
 ; 
 import 
  
 com.google.cloud.modelarmor.v1. GetFloorSettingRequest 
 
 ; 
 import 
  
 com.google.cloud.modelarmor.v1. ModelArmorClient 
 
 ; 
 import 
  
 java.io.IOException 
 ; 
 public 
  
 class 
 GetFolderFloorSetting 
  
 { 
  
 public 
  
 static 
  
 void 
  
 main 
 ( 
 String 
 [] 
  
 args 
 ) 
  
 throws 
  
 IOException 
  
 { 
  
 // TODO(developer): Replace these variables before running the sample. 
  
 String 
  
 folderId 
  
 = 
  
 "your-folder-id" 
 ; 
  
 getFolderFloorSetting 
 ( 
 folderId 
 ); 
  
 } 
  
 public 
  
 static 
  
  FloorSetting 
 
  
 getFolderFloorSetting 
 ( 
 String 
  
 folderId 
 ) 
  
 throws 
  
 IOException 
  
 { 
  
 // Initialize client that will be used to send requests. This client only 
  
 // needs to be created once, and can be reused for multiple requests. 
  
 try 
  
 ( 
  ModelArmorClient 
 
  
 client 
  
 = 
  
  ModelArmorClient 
 
 . 
 create 
 ()) 
  
 { 
  
 String 
  
 name 
  
 = 
  
  FloorSettingName 
 
 . 
  ofFolderLocationName 
 
 ( 
 folderId 
 , 
  
 "global" 
 ). 
 toString 
 (); 
  
  GetFloorSettingRequest 
 
  
 request 
  
 = 
  
  GetFloorSettingRequest 
 
 . 
 newBuilder 
 (). 
 setName 
 ( 
 name 
 ). 
 build 
 (); 
  
  FloorSetting 
 
  
 floorSetting 
  
 = 
  
 client 
 . 
 getFloorSetting 
 ( 
 request 
 ); 
  
 System 
 . 
 out 
 . 
 println 
 ( 
 "Fetched floor setting for folder: " 
  
 + 
  
 folderId 
 ); 
  
 return 
  
 floorSetting 
 ; 
  
 } 
  
 } 
 }

    • View the Model Armor floor setting for a given organization.

        import 
  
 com.google.cloud.modelarmor.v1. FloorSetting 
 
 ; 
 import 
  
 com.google.cloud.modelarmor.v1. FloorSettingName 
 
 ; 
 import 
  
 com.google.cloud.modelarmor.v1. GetFloorSettingRequest 
 
 ; 
 import 
  
 com.google.cloud.modelarmor.v1. ModelArmorClient 
 
 ; 
 import 
  
 java.io.IOException 
 ; 
 public 
  
 class 
 GetOrganizationFloorSetting 
  
 { 
  
 public 
  
 static 
  
 void 
  
 main 
 ( 
 String 
 [] 
  
 args 
 ) 
  
 throws 
  
 IOException 
  
 { 
  
 // TODO(developer): Replace these variables before running the sample. 
  
 String 
  
 organizationId 
  
 = 
  
 "your-organization-id" 
 ; 
  
 getOrganizationFloorSetting 
 ( 
 organizationId 
 ); 
  
 } 
  
 public 
  
 static 
  
  FloorSetting 
 
  
 getOrganizationFloorSetting 
 ( 
 String 
  
 organizationId 
 ) 
  
 throws 
  
 IOException 
  
 { 
  
 // Initialize client that will be used to send requests. This client only 
  
 // needs to be created once, and can be reused for multiple requests. 
  
 try 
  
 ( 
  ModelArmorClient 
 
  
 client 
  
 = 
  
  ModelArmorClient 
 
 . 
 create 
 ()) 
  
 { 
  
 String 
  
 name 
  
 = 
  
  FloorSettingName 
 
 . 
  ofOrganizationLocationName 
 
 ( 
 organizationId 
 , 
  
 "global" 
 ) 
  
 . 
 toString 
 (); 
  
  GetFloorSettingRequest 
 
  
 request 
  
 = 
  
  GetFloorSettingRequest 
 
 . 
 newBuilder 
 (). 
 setName 
 ( 
 name 
 ). 
 build 
 (); 
  
  FloorSetting 
 
  
 floorSetting 
  
 = 
  
 client 
 . 
 getFloorSetting 
 ( 
 request 
 ); 
  
 System 
 . 
 out 
 . 
 println 
 ( 
 "Fetched floor setting for organization: " 
  
 + 
  
 organizationId 
 ); 
  
 return 
  
 floorSetting 
 ; 
  
 } 
  
 } 
 }

    Node.js

    To run this code, first set up a Node.js development environment and install the Model Armor Node.js SDK .

    • View the Model Armor floor setting for a given project.

        /** 
 * TODO(developer): Uncomment these variables before running the sample. 
 */ 
 // const projectId = 'your-project-id'; 
 const 
  
 name 
  
 = 
  
 `projects/ 
 ${ 
 projectId 
 } 
 /locations/global/floorSetting` 
 ; 
 // Imports the Modelarmor library 
 const 
  
 { 
 ModelArmorClient 
 } 
  
 = 
  
 require 
 ( 
 '@google-cloud/modelarmor' 
 ). 
 v1 
 ; 
 // Instantiates a client 
 const 
  
 modelarmorClient 
  
 = 
  
 new 
  
 ModelArmorClient 
 (); 
 async 
  
 function 
  
 getProjectFloorSettings 
 () 
  
 { 
  
 // Construct request 
  
 const 
  
 request 
  
 = 
  
 { 
  
 name 
 , 
  
 }; 
  
 // Run request 
  
 const 
  
 [ 
 response 
 ] 
  
 = 
  
 await 
  
 modelarmorClient 
 . 
 getFloorSetting 
 ( 
 request 
 ); 
  
 return 
  
 response 
 ; 
 } 
 return 
  
 await 
  
 getProjectFloorSettings 
 ();

    • View the Model Armor floor setting for a given folder.

        /** 
 * TODO(developer): Uncomment these variables before running the sample. 
 */ 
 // const folderId = 'your-folder-id'; 
 const 
  
 name 
  
 = 
  
 `folders/ 
 ${ 
 folderId 
 } 
 /locations/global/floorSetting` 
 ; 
 // Imports the Modelarmor library 
 const 
  
 { 
 ModelArmorClient 
 } 
  
 = 
  
 require 
 ( 
 '@google-cloud/modelarmor' 
 ). 
 v1 
 ; 
 // Instantiates a client 
 const 
  
 modelarmorClient 
  
 = 
  
 new 
  
 ModelArmorClient 
 (); 
 async 
  
 function 
  
 getFolderFloorSettings 
 () 
  
 { 
  
 // Construct request 
  
 const 
  
 request 
  
 = 
  
 { 
  
 name 
 , 
  
 }; 
  
 const 
  
 [ 
 response 
 ] 
  
 = 
  
 await 
  
 modelarmorClient 
 . 
 getFloorSetting 
 ( 
 request 
 ); 
  
 return 
  
 response 
 ; 
 } 
 return 
  
 await 
  
 getFolderFloorSettings 
 ();

    • View the Model Armor floor setting for a given organization.

        /** 
 * TODO(developer): Uncomment these variables before running the sample. 
 */ 
 // const organizationId = 'your-organization-id'; 
 const 
  
 name 
  
 = 
  
 `organizations/ 
 ${ 
 organizationId 
 } 
 /locations/global/floorSetting` 
 ; 
 // Imports the Modelarmor library 
 const 
  
 { 
 ModelArmorClient 
 } 
  
 = 
  
 require 
 ( 
 '@google-cloud/modelarmor' 
 ). 
 v1 
 ; 
 // Instantiates a client 
 const 
  
 modelarmorClient 
  
 = 
  
 new 
  
 ModelArmorClient 
 (); 
 async 
  
 function 
  
 getOrganizationFloorSettings 
 () 
  
 { 
  
 // Construct request 
  
 const 
  
 request 
  
 = 
  
 { 
  
 name 
 , 
  
 }; 
  
 // Run request 
  
 const 
  
 [ 
 response 
 ] 
  
 = 
  
 await 
  
 modelarmorClient 
 . 
 getFloorSetting 
 ( 
 request 
 ); 
  
 return 
  
 response 
 ; 
 } 
 return 
  
 await 
  
 getOrganizationFloorSettings 
 ();

    PHP

    To run this code, first set up a PHP development environment and install the Model Armor PHP SDK .

    • View the Model Armor floor setting for a given project.

        use Google\Cloud\ModelArmor\V1\Client\ModelArmorClient; 
 use Google\Cloud\ModelArmor\V1\GetFloorSettingRequest; 
 /** 
 * Gets the floor settings for a given project. 
 * 
 * @param string $projectId The project Id for which the floor settings is to be retrieved. 
 * 
 */ 
 function get_project_floor_settings(string $projectId): void 
 { 
 $client = new ModelArmorClient(); 
 $floorSettingsName = sprintf('projects/%s/locations/global/floorSetting', $projectId); 
 $response = $client->getFloorSetting((new GetFloorSettingRequest())->setName($floorSettingsName)); 
 printf("Floor settings retrieved successfully: %s\n", $response->serializeToJsonString()); 
 }

    • View the Model Armor floor setting for a given folder.

        use Google\Cloud\ModelArmor\V1\Client\ModelArmorClient; 
 use Google\Cloud\ModelArmor\V1\GetFloorSettingRequest; 
 /** 
 * Gets the floor settings for a given folder. 
 * 
 * @param string $folderId The folder Id for which the floor settings is to be retrieved. 
 * 
 */ 
 function get_folder_floor_settings(string $folderId): void 
 { 
 $client = new ModelArmorClient(); 
 $floorSettingsName = sprintf('folders/%s/locations/global/floorSetting', $folderId); 
 $response = $client->getFloorSetting((new GetFloorSettingRequest())->setName($floorSettingsName)); 
 printf("Floor settings retrieved successfully: %s\n", $response->serializeToJsonString()); 
 }

    • View the Model Armor floor setting for a given organization.

        use Google\Cloud\ModelArmor\V1\Client\ModelArmorClient; 
 use Google\Cloud\ModelArmor\V1\GetFloorSettingRequest; 
 /** 
 * Gets the floor settings for a given organization. 
 * 
 * @param string $organizationId The organization Id for which the floor settings is to be retrieved. 
 * 
 */ 
 function get_organization_floor_settings(string $organizationId): void 
 { 
 $client = new ModelArmorClient(); 
 $floorSettingsName = sprintf('organizations/%s/locations/global/floorSetting', $organizationId); 
 $response = $client->getFloorSetting((new GetFloorSettingRequest())->setName($floorSettingsName)); 
 printf("Floor settings retrieved successfully: %s\n", $response->serializeToJsonString()); 
 }

    Python

    To run this code, first set up a Python development environment and install the Model Armor Python SDK .

    • View the Model Armor floor setting for a given project.

        from 
  
 google.cloud 
  
 import 
  modelarmor_v1 
 
 # Create the Model Armor client. 
 client 
 = 
  modelarmor_v1 
 
 . 
  ModelArmorClient 
 
 ( 
 transport 
 = 
 "rest" 
 ) 
 # TODO(Developer): Uncomment below variable. 
 # project_id = "YOUR_PROJECT_ID" 
 floor_settings_name 
 = 
 f 
 "projects/ 
 { 
 project_id 
 } 
 /locations/global/floorSetting" 
 # Get the project floor setting. 
 response 
 = 
 client 
 . 
  get_floor_setting 
 
 ( 
 request 
 = 
  modelarmor_v1 
 
 . 
  GetFloorSettingRequest 
 
 ( 
 name 
 = 
 floor_settings_name 
 ) 
 ) 
 # Print the retrieved floor setting. 
 print 
 ( 
 response 
 )

    • View the Model Armor floor setting for a given folder.

        from 
  
 google.cloud 
  
 import 
  modelarmor_v1 
 
 # Create the Model Armor client. 
 client 
 = 
  modelarmor_v1 
 
 . 
  ModelArmorClient 
 
 ( 
 transport 
 = 
 "rest" 
 ) 
 # TODO(Developer): Uncomment below variable. 
 # folder_id = "YOUR_FOLDER_ID" 
 # Prepare folder floor setting path/name 
 floor_settings_name 
 = 
 f 
 "folders/ 
 { 
 folder_id 
 } 
 /locations/global/floorSetting" 
 # Get the folder floor setting. 
 response 
 = 
 client 
 . 
  get_floor_setting 
 
 ( 
 request 
 = 
  modelarmor_v1 
 
 . 
  GetFloorSettingRequest 
 
 ( 
 name 
 = 
 floor_settings_name 
 ) 
 ) 
 # Print the retrieved floor setting. 
 print 
 ( 
 response 
 )

    • View the Model Armor floor setting for a given organization.

        from 
  
 google.cloud 
  
 import 
  modelarmor_v1 
 
 # Create the Model Armor client. 
 client 
 = 
  modelarmor_v1 
 
 . 
  ModelArmorClient 
 
 ( 
 transport 
 = 
 "rest" 
 ) 
 # TODO(Developer): Uncomment below variable. 
 # organization_id = "YOUR_ORGANIZATION_ID" 
 floor_settings_name 
 = 
 ( 
 f 
 "organizations/ 
 { 
 organization_id 
 } 
 /locations/global/floorSetting" 
 ) 
 # Get the organization floor setting. 
 response 
 = 
 client 
 . 
  get_floor_setting 
 
 ( 
 request 
 = 
  modelarmor_v1 
 
 . 
  GetFloorSettingRequest 
 
 ( 
 name 
 = 
 floor_settings_name 
 ) 
 ) 
 # Print the retrieved floor setting. 
 print 
 ( 
 response 
 )

    Update Model Armor floor settings

    Update Model Armor floor settings to change the minimum requirements for templates, reflect changes in security policies, correct misconfigurations, or resolve conflicts between floor settings.

    Run the following command to update the Model Armor floor settings.

    Console

    1. In the Google Cloud console, go to the Model Armorpage.

      Go to Model Armor

    2. Verify that you are viewing the project that you activated Model Armor on.

    3. On the Model Armorpage, go to the Floor settingstab and click Configure floor settings.

    4. Update the required fields and click Save floor settings.

    gcloud

     gcloud model-armor floorsettings update --full-uri=<full-uri-of-the-floorsetting>

    Example command:

     gcloud model-armor floorsettings update \
           --malicious-uri-filter-settings-enforcement=ENABLED \
           --pi-and-jailbreak-filter-settings-enforcement=DISABLED \
           --pi-and-jailbreak-filter-settings-confidence-level=LOW_AND_ABOVE \
           --basic-config-filter-enforcement=ENABLED \
           --add-rai-settings-filters='[{"confidenceLevel": "low_and_above", "filterType": "HARASSMENT"}, {"confidenceLevel": "high", "filterType": "SEXUALLY_EXPLICIT"}]' \
           --full-uri='folders/ FOLDER_ID 
/locations/global/floorSetting' \
           --enable-floor-setting-enforcement=true

    To configure floor settings with multi-language detection enabled, run the following command:

     gcloud model-armor floorsettings update \
        --full-uri=projects/ PROJECT_ID 
/locations/global/floorSetting \
        --enable-multi-language-detection

    Replace the following:

    • PROJECT_ID : the ID of the project for the floor settings.
    • FOLDER_ID : the ID of the folder for the floor settings.

    REST

    • Update the Model Armor floor setting for a given project.

       curl 
  
 - 
 X 
  
 PATCH 
  
 - 
 d 
  
 ' 
 { 
 "filterConfig" 
  
 :{ 
 "piAndJailbreakFilterSettings" 
 : 
  
 { 
  
 "filterEnforcement" 
 : 
  
 "ENABLED" 
 }, 
  
 "maliciousUriFilterSettings" 
 : 
  
 { 
  
 "filterEnforcement" 
 : 
  
 "ENABLED" 
  
 }, 
  
 "rai_settings" 
 :{ 
 "rai_filters" 
 :{ 
 "filter_type" 
 : 
 "DANGEROUS" 
 , 
  
 "confidence_level" 
 : 
 "LOW_AND_ABOVE" 
  
 }, 
  
 \ 
  
 "rai_filters" 
 :{ 
 "filter_type" 
 : 
 "HATE_SPEECH" 
 , 
  
 "confidence_level" 
 : 
 "LOW_AND_ABOVE" 
  
 }, 
  
 "rai_filters" 
 :{ 
 "filter_type" 
 : 
 "HARASSMENT" 
 , 
  
 "confidence_level" 
 : 
 "LOW_AND_ABOVE" 
  
 }, 
  
 "rai_filters" 
 :{ 
 "filter_type" 
 : 
 "SEXUALLY_EXPLICIT" 
 , 
  
 "confidence_level" 
 : 
 "LOW_AND_ABOVE" 
  
 }}}, 
 "enableFloorSettingEnforcement" 
 : 
 "true" 
 } 
 ' 
  
 \ 
  
 - 
 H 
  
 "Content-Type: application/json" 
  
 \ 
  
 - 
 H 
  
 "Authorization: Bearer $(gcloud auth print-access-token) \ 
 " 
 h 
 tt 
 ps 
 : 
 //modelarmor.googleapis.com/v1/projects/ PROJECT_ID 
/locations/global/floorSetting"

    • Update the Model Armor floor setting for a given folder.

       curl 
  
 - 
 X 
  
 PATCH 
  
 \ 
  
 - 
 d 
  
 ' 
 { 
 "filterConfig" 
  
 :{ 
 "piAndJailbreakFilterSettings" 
 : 
  
 { 
  
 "filterEnforcement" 
 : 
  
 "ENABLED" 
 }, 
  
 "maliciousUriFilterSettings" 
 : 
  
 { 
 "filterEnforcement" 
 : 
  
 "ENABLED" 
  
 }}, 
 "enableFloorSettingEnforcement" 
 : 
 "true" 
 } 
 ' 
  
 \ 
  
 - 
 H 
  
 "Content-Type: application/json" 
  
 \ 
  
 - 
 H 
  
 "Authorization: Bearer $(gcloud auth print-access-token)" 
  
 \ 
  
 "https://modelarmor.googleapis.com/v1/folders/ FOLDER_ID 
/locations/global/floorSetting"

    • Update the Model Armor floor setting for a given organization.

       curl 
  
 - 
 X 
  
 PATCH 
  
 \ 
  
 - 
 d 
  
 ' 
 { 
 "filterConfig" 
  
 :{ 
 "piAndJailbreakFilterSettings" 
 : 
  
 { 
  
 "filterEnforcement" 
 : 
  
 "ENABLED" 
 }, 
  
 "maliciousUriFilterSettings" 
 : 
  
 { 
  
 "filterEnforcement" 
 : 
  
 "ENABLED" 
  
 }}, 
 "enableFloorSettingEnforcement" 
 : 
 "true" 
 } 
 ' 
  
 \ 
  
 - 
 H 
  
 "Content-Type: application/json" 
  
 \ 
  
 - 
 H 
  
 "Authorization: Bearer $(gcloud auth print-access-token)" 
  
 \ 
  
 "https://modelarmor.googleapis.com/v1/organizations/ ORGANIZATION_ID 
/locations/global/floorSetting"

    Replace the following:

    • PROJECT_ID : the ID of the project for the floor settings.
    • FOLDER_ID : the ID of the folder for the floor settings.
    • ORGANIZATION_ID : the ID of the organization for the floor settings.

    The update command returns the following response:

     { 
 "name" 
 : 
  
 "projects/PROJECT_ID/locations/global/floorSetting" 
 , 
 "updateTime" 
 : 
  
 "2024-12-19T15:36:21.318191Z" 
 , 
 "filterConfig" 
 : 
  
 { 
  
 "piAndJailbreakFilterSettings" 
 : 
  
 { 
  
 "filterEnforcement" 
 : 
  
 "ENABLED" 
  
 }, 
 "maliciousUriFilterSettings" 
 : 
  
 { 
  
 "filterEnforcement" 
 : 
  
 "ENABLED" 
  
 } 
 } 
 }

    C#

    To run this code, first set up a C# development environment and install the Model Armor C# SDK .

    • Update the Model Armor floor setting for a given project.

        using 
  
  Google.Cloud.ModelArmor.V1 
 
 ; 
 using 
  
 System 
 ; 
 public 
  
 class 
  
 UpdateProjectFloorSettings 
 { 
  
 public 
  
 FloorSetting 
  
 UpdateProjectFloorSetting 
 ( 
 string 
  
 projectId 
 ) 
  
 { 
  
 // Create the client 
  
  ModelArmorClient 
 
  
 client 
  
 = 
  
  ModelArmorClient 
 
 . 
  Create 
 
 (); 
  
 // Construct the floor settings name 
  
 string 
  
 floorSettingsName 
  
 = 
  
 $"projects/{projectId}/locations/global/floorSetting" 
 ; 
  
 // Build the floor settings with your preferred filters 
  
 // For more details on filters, please refer to the following doc: 
  
 // https://cloud.google.com/security-command-center/docs/key-concepts-model-armor#ma-filters 
  
 var 
  
 raiFilter 
  
 = 
  
 new 
  
 RaiFilterSettings 
 . 
 Types 
 . 
 RaiFilter 
  
 { 
  
 FilterType 
  
 = 
  
  RaiFilterType 
 
 . 
  HateSpeech 
 
 , 
  
 ConfidenceLevel 
  
 = 
  
  DetectionConfidenceLevel 
 
 . 
  High 
 
 , 
  
 }; 
  
 var 
  
 raiFilterSettings 
  
 = 
  
 new 
  
  RaiFilterSettings 
 
 (); 
  
 raiFilterSettings 
 . 
  RaiFilters 
 
 . 
 Add 
 ( 
 raiFilter 
 ); 
  
 var 
  
 filterConfig 
  
 = 
  
 new 
  
  FilterConfig 
 
  
 { 
  
 RaiSettings 
  
 = 
  
 raiFilterSettings 
  
 }; 
  
 var 
  
 floorSetting 
  
 = 
  
 new 
  
  FloorSetting 
 
  
 { 
  
 Name 
  
 = 
  
 floorSettingsName 
 , 
  
 FilterConfig 
  
 = 
  
 filterConfig 
 , 
  
 EnableFloorSettingEnforcement 
  
 = 
  
 true 
 , 
  
 }; 
  
 // Create the update request 
  
 var 
  
 updateRequest 
  
 = 
  
 new 
  
  UpdateFloorSettingRequest 
 
  
 { 
  
 FloorSetting 
  
 = 
  
 floorSetting 
  
 }; 
  
 // Update the floor settings 
  
  FloorSetting 
 
  
 response 
  
 = 
  
 client 
 . 
  UpdateFloorSetting 
 
 ( 
 updateRequest 
 ); 
  
 Console 
 . 
 WriteLine 
 ( 
 $"Floor setting updated: {response. Name 
}" 
 ); 
  
 return 
  
 response 
 ; 
  
 } 
 }

    • Update the Model Armor floor setting for a given folder.

        using 
  
  Google.Cloud.ModelArmor.V1 
 
 ; 
 using 
  
 System 
 ; 
 public 
  
 class 
  
 UpdateFolderFloorSettings 
 { 
  
 public 
  
 FloorSetting 
  
 UpdateFolderFloorSetting 
 ( 
 string 
  
 folderId 
 ) 
  
 { 
  
 // Create the client 
  
  ModelArmorClient 
 
  
 client 
  
 = 
  
  ModelArmorClient 
 
 . 
  Create 
 
 (); 
  
 // Construct the floor settings name 
  
 string 
  
 floorSettingsName 
  
 = 
  
 $"folders/{folderId}/locations/global/floorSetting" 
 ; 
  
 // Build the floor settings with your preferred filters 
  
 // For more details on filters, please refer to the following doc: 
  
 // https://cloud.google.com/security-command-center/docs/key-concepts-model-armor#ma-filters 
  
 var 
  
 raiFilter 
  
 = 
  
 new 
  
 RaiFilterSettings 
 . 
 Types 
 . 
 RaiFilter 
  
 { 
  
 FilterType 
  
 = 
  
  RaiFilterType 
 
 . 
  HateSpeech 
 
 , 
  
 ConfidenceLevel 
  
 = 
  
  DetectionConfidenceLevel 
 
 . 
  High 
 
 , 
  
 }; 
  
 var 
  
 raiFilterSettings 
  
 = 
  
 new 
  
  RaiFilterSettings 
 
 (); 
  
 raiFilterSettings 
 . 
  RaiFilters 
 
 . 
 Add 
 ( 
 raiFilter 
 ); 
  
 var 
  
 filterConfig 
  
 = 
  
 new 
  
  FilterConfig 
 
  
 { 
  
 RaiSettings 
  
 = 
  
 raiFilterSettings 
  
 }; 
  
 var 
  
 floorSetting 
  
 = 
  
 new 
  
  FloorSetting 
 
  
 { 
  
 Name 
  
 = 
  
 floorSettingsName 
 , 
  
 FilterConfig 
  
 = 
  
 filterConfig 
 , 
  
 EnableFloorSettingEnforcement 
  
 = 
  
 true 
 , 
  
 }; 
  
 // Create the update request 
  
 var 
  
 updateRequest 
  
 = 
  
 new 
  
  UpdateFloorSettingRequest 
 
  
 { 
  
 FloorSetting 
  
 = 
  
 floorSetting 
  
 }; 
  
 // Update the floor settings 
  
  FloorSetting 
 
  
 response 
  
 = 
  
 client 
 . 
  UpdateFloorSetting 
 
 ( 
 updateRequest 
 ); 
  
 Console 
 . 
 WriteLine 
 ( 
 $"Floor setting updated: {response. Name 
}" 
 ); 
  
 return 
  
 response 
 ; 
  
 } 
 }

    • Update the Model Armor floor setting for a given organization.

        using 
  
  Google.Cloud.ModelArmor.V1 
 
 ; 
 using 
  
 System 
 ; 
 public 
  
 class 
  
 UpdateOrganizationFloorSettings 
 { 
  
 public 
  
 FloorSetting 
  
 UpdateOrganizationFloorSetting 
 ( 
 string 
  
 organizationId 
 ) 
  
 { 
  
 // Create the client 
  
  ModelArmorClient 
 
  
 client 
  
 = 
  
  ModelArmorClient 
 
 . 
  Create 
 
 (); 
  
 // Construct the floor settings name 
  
 string 
  
 floorSettingsName 
  
 = 
  
 $"organizations/{organizationId}/locations/global/floorSetting" 
 ; 
  
 // Build the floor settings with your preferred filters 
  
 // For more details on filters, please refer to the following doc: 
  
 // https://cloud.google.com/security-command-center/docs/key-concepts-model-armor#ma-filters 
  
 var 
  
 raiFilter 
  
 = 
  
 new 
  
 RaiFilterSettings 
 . 
 Types 
 . 
 RaiFilter 
  
 { 
  
 FilterType 
  
 = 
  
  RaiFilterType 
 
 . 
  HateSpeech 
 
 , 
  
 ConfidenceLevel 
  
 = 
  
  DetectionConfidenceLevel 
 
 . 
  High 
 
 , 
  
 }; 
  
 var 
  
 raiFilterSettings 
  
 = 
  
 new 
  
  RaiFilterSettings 
 
 (); 
  
 raiFilterSettings 
 . 
  RaiFilters 
 
 . 
 Add 
 ( 
 raiFilter 
 ); 
  
 var 
  
 filterConfig 
  
 = 
  
 new 
  
  FilterConfig 
 
  
 { 
  
 RaiSettings 
  
 = 
  
 raiFilterSettings 
  
 }; 
  
 var 
  
 floorSetting 
  
 = 
  
 new 
  
  FloorSetting 
 
  
 { 
  
 Name 
  
 = 
  
 floorSettingsName 
 , 
  
 FilterConfig 
  
 = 
  
 filterConfig 
 , 
  
 EnableFloorSettingEnforcement 
  
 = 
  
 true 
 , 
  
 }; 
  
 // Create the update request 
  
 var 
  
 updateRequest 
  
 = 
  
 new 
  
  UpdateFloorSettingRequest 
 
  
 { 
  
 FloorSetting 
  
 = 
  
 floorSetting 
  
 }; 
  
 // Update the floor settings 
  
  FloorSetting 
 
  
 response 
  
 = 
  
 client 
 . 
  UpdateFloorSetting 
 
 ( 
 updateRequest 
 ); 
  
 Console 
 . 
 WriteLine 
 ( 
 $"Floor setting updated: {response. Name 
}" 
 ); 
  
 return 
  
 response 
 ; 
  
 } 
 }

    Go

    To run this code, first set up a Go development environment and install the Model Armor Go SDK .

    • Update the Model Armor floor setting for a given project.

        import 
  
 ( 
  
 "context" 
  
 "fmt" 
  
 "io" 
  
 modelarmor 
  
 "cloud.google.com/go/modelarmor/apiv1" 
  
 modelarmorpb 
  
 "cloud.google.com/go/modelarmor/apiv1/modelarmorpb" 
 ) 
 // updateProjectFloorSettings updates the floor settings of a project. 
 // 
 // This method updates the floor settings of a project. 
 // 
 // w io.Writer: The writer to use for logging. 
 // projectID string: The ID of the project. 
 func 
  
 updateProjectFloorSettings 
 ( 
 w 
  
 io 
 . 
 Writer 
 , 
  
 projectID 
  
 string 
 ) 
  
 error 
  
 { 
  
 ctx 
  
 := 
  
 context 
 . 
 Background 
 () 
  
 // Create the Model Armor client. 
  
 client 
 , 
  
 err 
  
 := 
  
 modelarmor 
 . 
  NewClient 
 
 ( 
 ctx 
 ) 
  
 if 
  
 err 
  
 != 
  
 nil 
  
 { 
  
 return 
  
 fmt 
 . 
 Errorf 
 ( 
 "failed to create client: %w" 
 , 
  
 err 
 ) 
  
 } 
  
 defer 
  
 client 
 . 
  Close 
 
 () 
  
 // Prepare project floor setting path/name 
  
 floorSettingsName 
  
 := 
  
 fmt 
 . 
 Sprintf 
 ( 
 "projects/%s/locations/global/floorSetting" 
 , 
  
 projectID 
 ) 
  
 // Update the project floor setting 
  
 // For more details on filters, please refer to the following doc: 
  
 // [https://cloud.google.com/security-command-center/docs/key-concepts-model-armor#ma-filters](https://cloud.google.com/security-command-center/docs/key-concepts-model-armor#ma-filters) 
  
 enableEnforcement 
  
 := 
  
 true 
  
 req 
  
 := 
  
& modelarmorpb 
 . 
 UpdateFloorSettingRequest 
 { 
  
 FloorSetting 
 : 
  
& modelarmorpb 
 . 
 FloorSetting 
 { 
  
 Name 
 : 
  
 floorSettingsName 
 , 
  
 FilterConfig 
 : 
  
& modelarmorpb 
 . 
 FilterConfig 
 { 
  
 RaiSettings 
 : 
  
& modelarmorpb 
 . 
 RaiFilterSettings 
 { 
  
 RaiFilters 
 : 
  
 [] 
 * 
 modelarmorpb 
 . 
 RaiFilterSettings_RaiFilter 
 { 
  
 { 
  
 FilterType 
 : 
  
 modelarmorpb 
 . 
  RaiFilterType_HATE_SPEECH 
 
 , 
  
 ConfidenceLevel 
 : 
  
 modelarmorpb 
 . 
  DetectionConfidenceLevel_HIGH 
 
 , 
  
 }, 
  
 }, 
  
 }, 
  
 }, 
  
 EnableFloorSettingEnforcement 
 : 
  
& enableEnforcement 
 , 
  
 }, 
  
 } 
  
 response 
 , 
  
 err 
  
 := 
  
 client 
 . 
 UpdateFloorSetting 
 ( 
 ctx 
 , 
  
 req 
 ) 
  
 if 
  
 err 
  
 != 
  
 nil 
  
 { 
  
 return 
  
 fmt 
 . 
 Errorf 
 ( 
 "failed to update floor setting: %w" 
 , 
  
 err 
 ) 
  
 } 
  
 // Print the updated config 
  
 fmt 
 . 
 Fprintf 
 ( 
 w 
 , 
  
 "Updated project floor setting: %+v\n" 
 , 
  
 response 
 ) 
  
 return 
  
 nil 
 }

    • Update the Model Armor floor setting for a given folder.

        import 
  
 ( 
  
 "context" 
  
 "fmt" 
  
 "io" 
  
 modelarmor 
  
 "cloud.google.com/go/modelarmor/apiv1" 
  
 modelarmorpb 
  
 "cloud.google.com/go/modelarmor/apiv1/modelarmorpb" 
 ) 
 // updateFolderFloorSettings updates floor settings of a folder. 
 // 
 // This method updates the floor settings of a folder. 
 // 
 // w io.Writer: The writer to use for logging. 
 // folderID string: The ID of the folder. 
 func 
  
 updateFolderFloorSettings 
 ( 
 w 
  
 io 
 . 
 Writer 
 , 
  
 folderID 
  
 string 
 ) 
  
 error 
  
 { 
  
 ctx 
  
 := 
  
 context 
 . 
 Background 
 () 
  
 // Create the Model Armor client. 
  
 client 
 , 
  
 err 
  
 := 
  
 modelarmor 
 . 
  NewClient 
 
 ( 
 ctx 
 ) 
  
 if 
  
 err 
  
 != 
  
 nil 
  
 { 
  
 return 
  
 fmt 
 . 
 Errorf 
 ( 
 "failed to create client: %w" 
 , 
  
 err 
 ) 
  
 } 
  
 defer 
  
 client 
 . 
  Close 
 
 () 
  
 // Prepare folder floor settings path/name 
  
 floorSettingsName 
  
 := 
  
 fmt 
 . 
 Sprintf 
 ( 
 "folders/%s/locations/global/floorSetting" 
 , 
  
 folderID 
 ) 
  
 // Prepare the floor setting update 
  
 enableEnforcement 
  
 := 
  
 true 
  
 floorSetting 
  
 := 
  
& modelarmorpb 
 . 
 FloorSetting 
 { 
  
 Name 
 : 
  
 floorSettingsName 
 , 
  
 FilterConfig 
 : 
  
& modelarmorpb 
 . 
 FilterConfig 
 { 
  
 RaiSettings 
 : 
  
& modelarmorpb 
 . 
 RaiFilterSettings 
 { 
  
 RaiFilters 
 : 
  
 [] 
 * 
 modelarmorpb 
 . 
 RaiFilterSettings_RaiFilter 
 { 
  
 { 
  
 FilterType 
 : 
  
 modelarmorpb 
 . 
  RaiFilterType_HATE_SPEECH 
 
 , 
  
 ConfidenceLevel 
 : 
  
 modelarmorpb 
 . 
  DetectionConfidenceLevel_HIGH 
 
 , 
  
 }, 
  
 }, 
  
 }, 
  
 }, 
  
 EnableFloorSettingEnforcement 
 : 
  
& enableEnforcement 
 , 
  
 } 
  
 // Prepare request for updating the floor setting. 
  
 req 
  
 := 
  
& modelarmorpb 
 . 
 UpdateFloorSettingRequest 
 { 
  
 FloorSetting 
 : 
  
 floorSetting 
 , 
  
 } 
  
 // Update the floor setting. 
  
 response 
 , 
  
 err 
  
 := 
  
 client 
 . 
 UpdateFloorSetting 
 ( 
 ctx 
 , 
  
 req 
 ) 
  
 if 
  
 err 
  
 != 
  
 nil 
  
 { 
  
 return 
  
 fmt 
 . 
 Errorf 
 ( 
 "failed to update floor setting: %w" 
 , 
  
 err 
 ) 
  
 } 
  
 // Print the updated config 
  
 fmt 
 . 
 Fprintf 
 ( 
 w 
 , 
  
 "Updated folder floor setting: %v\n" 
 , 
  
 response 
 ) 
  
 return 
  
 nil 
 }

    • Update the Model Armor floor setting for a given organization.

        import 
  
 ( 
  
 "context" 
  
 "fmt" 
  
 "io" 
  
 modelarmor 
  
 "cloud.google.com/go/modelarmor/apiv1" 
  
 modelarmorpb 
  
 "cloud.google.com/go/modelarmor/apiv1/modelarmorpb" 
 ) 
 // updateOrganizationFloorSettings updates floor settings of an organization. 
 // 
 // This method updates the floor settings of an organization. 
 // 
 // w io.Writer: The writer to use for logging. 
 // organizationID string: The ID of the organization. 
 func 
  
 updateOrganizationFloorSettings 
 ( 
 w 
  
 io 
 . 
 Writer 
 , 
  
 organizationID 
  
 string 
 ) 
  
 error 
  
 { 
  
 ctx 
  
 := 
  
 context 
 . 
 Background 
 () 
  
 // Create the Model Armor client. 
  
 client 
 , 
  
 err 
  
 := 
  
 modelarmor 
 . 
  NewClient 
 
 ( 
 ctx 
 ) 
  
 if 
  
 err 
  
 != 
  
 nil 
  
 { 
  
 return 
  
 fmt 
 . 
 Errorf 
 ( 
 "failed to create client: %w" 
 , 
  
 err 
 ) 
  
 } 
  
 defer 
  
 client 
 . 
  Close 
 
 () 
  
 // Prepare organization floor setting path/name 
  
 floorSettingsName 
  
 := 
  
 fmt 
 . 
 Sprintf 
 ( 
 "organizations/%s/locations/global/floorSetting" 
 , 
  
 organizationID 
 ) 
  
 // Update the organization floor setting 
  
 // For more details on filters, please refer to the following doc: 
  
 // [https://cloud.google.com/security-command-center/docs/key-concepts-model-armor#ma-filters](https://cloud.google.com/security-command-center/docs/key-concepts-model-armor#ma-filters) 
  
 enableEnforcement 
  
 := 
  
 true 
  
 req 
  
 := 
  
& modelarmorpb 
 . 
 UpdateFloorSettingRequest 
 { 
  
 FloorSetting 
 : 
  
& modelarmorpb 
 . 
 FloorSetting 
 { 
  
 Name 
 : 
  
 floorSettingsName 
 , 
  
 FilterConfig 
 : 
  
& modelarmorpb 
 . 
 FilterConfig 
 { 
  
 RaiSettings 
 : 
  
& modelarmorpb 
 . 
 RaiFilterSettings 
 { 
  
 RaiFilters 
 : 
  
 [] 
 * 
 modelarmorpb 
 . 
 RaiFilterSettings_RaiFilter 
 { 
  
 { 
  
 FilterType 
 : 
  
 modelarmorpb 
 . 
  RaiFilterType_HATE_SPEECH 
 
 , 
  
 ConfidenceLevel 
 : 
  
 modelarmorpb 
 . 
  DetectionConfidenceLevel_HIGH 
 
 , 
  
 }, 
  
 }, 
  
 }, 
  
 }, 
  
 EnableFloorSettingEnforcement 
 : 
  
& enableEnforcement 
 , 
  
 }, 
  
 } 
  
 response 
 , 
  
 err 
  
 := 
  
 client 
 . 
 UpdateFloorSetting 
 ( 
 ctx 
 , 
  
 req 
 ) 
  
 if 
  
 err 
  
 != 
  
 nil 
  
 { 
  
 return 
  
 fmt 
 . 
 Errorf 
 ( 
 "failed to update floor setting: %w" 
 , 
  
 err 
 ) 
  
 } 
  
 // Print the updated config 
  
 fmt 
 . 
 Fprintf 
 ( 
 w 
 , 
  
 "Updated org floor setting: %+v\n" 
 , 
  
 response 
 )

    Java

    To run this code, first set up a Java development environment and install the Model Armor Java SDK .

    Node.js

    To run this code, first set up a Node.js development environment and install the Model Armor Node.js SDK .

    • Update the Model Armor floor setting for a given project.

        /** 
 * TODO(developer): Uncomment these variables before running the sample. 
 */ 
 // const projectId = 'your-project-id'; 
 const 
  
 modelarmor 
  
 = 
  
 require 
 ( 
 '@google-cloud/modelarmor' 
 ); 
 const 
  
 { 
 ModelArmorClient 
 } 
  
 = 
  
 modelarmor 
 . 
 v1 
 ; 
 const 
  
 { 
 protos 
 } 
  
 = 
  
 modelarmor 
 ; 
 // Initiate client 
 const 
  
 client 
  
 = 
  
 new 
  
 ModelArmorClient 
 (); 
 async 
  
 function 
  
 updateProjectFloorSettings 
 () 
  
 { 
  
 const 
  
 floorSettingsName 
  
 = 
  
 `projects/ 
 ${ 
 projectId 
 } 
 /locations/global/floorSetting` 
 ; 
  
 // Build the floor settings with your preferred filters 
  
 // For more details on filters, please refer to the following doc: 
  
 // https://cloud.google.com/security-command-center/docs/key-concepts-model-armor#ma-filters 
  
 const 
  
 floorSetting 
  
 = 
  
 { 
  
 name 
 : 
  
 floorSettingsName 
 , 
  
 filterConfig 
 : 
  
 { 
  
 raiSettings 
 : 
  
 { 
  
 raiFilters 
 : 
  
 [ 
  
 { 
  
 filterType 
 : 
  
 protos 
 . 
 google 
 . 
 cloud 
 . 
 modelarmor 
 . 
 v1 
 . 
 RaiFilterType 
 . 
 HARASSMENT 
 , 
  
 confidenceLevel 
 : 
  
 protos 
 . 
 google 
 . 
 cloud 
 . 
 modelarmor 
 . 
 v1 
 . 
 DetectionConfidenceLevel 
  
 . 
 LOW_AND_ABOVE 
 , 
  
 }, 
  
 { 
  
 filterType 
 : 
  
 protos 
 . 
 google 
 . 
 cloud 
 . 
 modelarmor 
 . 
 v1 
 . 
 RaiFilterType 
  
 . 
 SEXUALLY_EXPLICIT 
 , 
  
 confidenceLevel 
 : 
  
 protos 
 . 
 google 
 . 
 cloud 
 . 
 modelarmor 
 . 
 v1 
 . 
 DetectionConfidenceLevel 
  
 . 
 LOW_AND_ABOVE 
 , 
  
 }, 
  
 ], 
  
 }, 
  
 }, 
  
 enableFloorSettingEnforcement 
 : 
  
 true 
 , 
  
 }; 
  
 const 
  
 request 
  
 = 
  
 { 
  
 floorSetting 
 : 
  
 floorSetting 
 , 
  
 }; 
  
 const 
  
 [ 
 response 
 ] 
  
 = 
  
 await 
  
 client 
 . 
 updateFloorSetting 
 ( 
 request 
 ); 
  
 return 
  
 response 
 ; 
 } 
 return 
  
 await 
  
 updateProjectFloorSettings 
 ();

    • Update the Model Armor floor setting for a given folder.

        /** 
 * TODO(developer): Uncomment these variables before running the sample. 
 */ 
 // const folderId = 'your-folder-id'; 
 // Imports the Model Armor library 
 const 
  
 modelarmor 
  
 = 
  
 require 
 ( 
 '@google-cloud/modelarmor' 
 ); 
 const 
  
 { 
 ModelArmorClient 
 } 
  
 = 
  
 modelarmor 
 . 
 v1 
 ; 
 const 
  
 { 
 protos 
 } 
  
 = 
  
 modelarmor 
 ; 
 // Instantiates a client 
 const 
  
 client 
  
 = 
  
 new 
  
 ModelArmorClient 
 (); 
 async 
  
 function 
  
 updateFolderFloorSettings 
 () 
  
 { 
  
 const 
  
 floorSettingsName 
  
 = 
  
 `folders/ 
 ${ 
 folderId 
 } 
 /locations/global/floorSetting` 
 ; 
  
 // Build the floor settings with your preferred filters 
  
 // For more details on filters, please refer to the following doc: 
  
 // https://cloud.google.com/security-command-center/docs/key-concepts-model-armor#ma-filters 
  
 const 
  
 floorSetting 
  
 = 
  
 { 
  
 name 
 : 
  
 floorSettingsName 
 , 
  
 filterConfig 
 : 
  
 { 
  
 raiSettings 
 : 
  
 { 
  
 raiFilters 
 : 
  
 [ 
  
 { 
  
 filterType 
 : 
  
 protos 
 . 
 google 
 . 
 cloud 
 . 
 modelarmor 
 . 
 v1 
 . 
 RaiFilterType 
 . 
 HARASSMENT 
 , 
  
 confidenceLevel 
 : 
  
 protos 
 . 
 google 
 . 
 cloud 
 . 
 modelarmor 
 . 
 v1 
 . 
 DetectionConfidenceLevel 
  
 . 
 LOW_AND_ABOVE 
 , 
  
 }, 
  
 { 
  
 filterType 
 : 
  
 protos 
 . 
 google 
 . 
 cloud 
 . 
 modelarmor 
 . 
 v1 
 . 
 RaiFilterType 
  
 . 
 SEXUALLY_EXPLICIT 
 , 
  
 confidenceLevel 
 : 
  
 protos 
 . 
 google 
 . 
 cloud 
 . 
 modelarmor 
 . 
 v1 
 . 
 DetectionConfidenceLevel 
  
 . 
 LOW_AND_ABOVE 
 , 
  
 }, 
  
 ], 
  
 }, 
  
 }, 
  
 enableFloorSettingEnforcement 
 : 
  
 true 
 , 
  
 }; 
  
 const 
  
 request 
  
 = 
  
 { 
  
 floorSetting 
 : 
  
 floorSetting 
 , 
  
 }; 
  
 const 
  
 [ 
 response 
 ] 
  
 = 
  
 await 
  
 client 
 . 
 updateFloorSetting 
 ( 
 request 
 ); 
  
 return 
  
 response 
 ; 
 } 
 return 
  
 await 
  
 updateFolderFloorSettings 
 ();

    • Update the Model Armor floor setting for a given organization.

        /** 
 * TODO(developer): Uncomment these variables before running the sample. 
 */ 
 // const organizationId = 'your-organization-id'; 
 const 
  
 modelarmor 
  
 = 
  
 require 
 ( 
 '@google-cloud/modelarmor' 
 ); 
 const 
  
 { 
 ModelArmorClient 
 } 
  
 = 
  
 modelarmor 
 . 
 v1 
 ; 
 const 
  
 { 
 protos 
 } 
  
 = 
  
 modelarmor 
 ; 
 const 
  
 client 
  
 = 
  
 new 
  
 ModelArmorClient 
 (); 
 async 
  
 function 
  
 updateOrganizationFloorSettings 
 () 
  
 { 
  
 const 
  
 floorSettingsName 
  
 = 
  
 `organizations/ 
 ${ 
 organizationId 
 } 
 /locations/global/floorSetting` 
 ; 
  
 // Build the floor settings with your preferred filters 
  
 // For more details on filters, please refer to the following doc: 
  
 // https://cloud.google.com/security-command-center/docs/key-concepts-model-armor#ma-filters 
  
 const 
  
 floorSetting 
  
 = 
  
 { 
  
 name 
 : 
  
 floorSettingsName 
 , 
  
 filterConfig 
 : 
  
 { 
  
 raiSettings 
 : 
  
 { 
  
 raiFilters 
 : 
  
 [ 
  
 { 
  
 filterType 
 : 
  
 protos 
 . 
 google 
 . 
 cloud 
 . 
 modelarmor 
 . 
 v1 
 . 
 RaiFilterType 
 . 
 HARASSMENT 
 , 
  
 confidenceLevel 
 : 
  
 protos 
 . 
 google 
 . 
 cloud 
 . 
 modelarmor 
 . 
 v1 
 . 
 DetectionConfidenceLevel 
  
 . 
 LOW_AND_ABOVE 
 , 
  
 }, 
  
 { 
  
 filterType 
 : 
  
 protos 
 . 
 google 
 . 
 cloud 
 . 
 modelarmor 
 . 
 v1 
 . 
 RaiFilterType 
  
 . 
 SEXUALLY_EXPLICIT 
 , 
  
 confidenceLevel 
 : 
  
 protos 
 . 
 google 
 . 
 cloud 
 . 
 modelarmor 
 . 
 v1 
 . 
 DetectionConfidenceLevel 
  
 . 
 LOW_AND_ABOVE 
 , 
  
 }, 
  
 ], 
  
 }, 
  
 }, 
  
 enableFloorSettingEnforcement 
 : 
  
 true 
 , 
  
 }; 
  
 const 
  
 request 
  
 = 
  
 { 
  
 floorSetting 
 : 
  
 floorSetting 
 , 
  
 }; 
  
 const 
  
 [ 
 response 
 ] 
  
 = 
  
 await 
  
 client 
 . 
 updateFloorSetting 
 ( 
 request 
 ); 
  
 return 
  
 response 
 ; 
 } 
 return 
  
 await 
  
 updateOrganizationFloorSettings 
 ();

    PHP

    To run this code, first set up a PHP development environment and install the Model Armor PHP SDK .

    • Update the Model Armor floor setting for a given project.

        use Google\Cloud\ModelArmor\V1\Client\ModelArmorClient; 
 use Google\Cloud\ModelArmor\V1\RaiFilterType; 
 use Google\Cloud\ModelArmor\V1\DetectionConfidenceLevel; 
 use Google\Cloud\ModelArmor\V1\UpdateFloorSettingRequest; 
 use Google\Cloud\ModelArmor\V1\FilterConfig; 
 use Google\Cloud\ModelArmor\V1\FloorSetting; 
 use Google\Cloud\ModelArmor\V1\RaiFilterSettings; 
 use Google\Cloud\ModelArmor\V1\RaiFilterSettings\RaiFilter; 
 /** 
 * Updates the floor settings for a given project. 
 * 
 * @param string $projectId The project Id for which the floor settings is to be updated. 
 * 
 */ 
 function update_project_floor_settings(string $projectId): void 
 { 
 $client = new ModelArmorClient(); 
 $floorSettingsName = sprintf('projects/%s/locations/global/floorSetting', $projectId); 
 // Build the floor settings with your preferred filters 
 // For more details on filters, please refer to the following doc: 
 // https://cloud.google.com/security-command-center/docs/key-concepts-model-armor#ma-filters 
 $raiFilterSetting = (new RaiFilterSettings()) 
 ->setRaiFilters([ 
 (new RaiFilter()) 
 ->setFilterType(RaiFilterType::HATE_SPEECH) 
 ->setConfidenceLevel(DetectionConfidenceLevel::HIGH) 
 ]); 
 $filterConfig = (new FilterConfig())->setRaiSettings($raiFilterSetting); 
 $floorSetting = (new FloorSetting()) 
 ->setName($floorSettingsName) 
 ->setFilterConfig($filterConfig) 
 ->setEnableFloorSettingEnforcement(true); 
 $updateRequest = (new UpdateFloorSettingRequest())->setFloorSetting($floorSetting); 
 $response = $client->updateFloorSetting($updateRequest); 
 printf("Floor setting updated: %s\n", $response->getName()); 
 }

    • Update the Model Armor floor setting for a given folder.

        use Google\Cloud\ModelArmor\V1\Client\ModelArmorClient; 
 use Google\Cloud\ModelArmor\V1\RaiFilterType; 
 use Google\Cloud\ModelArmor\V1\DetectionConfidenceLevel; 
 use Google\Cloud\ModelArmor\V1\UpdateFloorSettingRequest; 
 use Google\Cloud\ModelArmor\V1\FilterConfig; 
 use Google\Cloud\ModelArmor\V1\FloorSetting; 
 use Google\Cloud\ModelArmor\V1\RaiFilterSettings; 
 use Google\Cloud\ModelArmor\V1\RaiFilterSettings\RaiFilter; 
 /** 
 * Updates the floor settings for a given folder. 
 * 
 * @param string $folderId The folder Id for which the floor settings is to be updated. 
 * 
 */ 
 function update_folder_floor_settings(string $folderId): void 
 { 
 $client = new ModelArmorClient(); 
 $floorSettingsName = sprintf('folders/%s/locations/global/floorSetting', $folderId); 
 // Build the floor settings with your preferred filters 
 // For more details on filters, please refer to the following doc: 
 // https://cloud.google.com/security-command-center/docs/key-concepts-model-armor#ma-filters 
 $raiFilterSetting = (new RaiFilterSettings()) 
 ->setRaiFilters([ 
 (new RaiFilter()) 
 ->setFilterType(RaiFilterType::HATE_SPEECH) 
 ->setConfidenceLevel(DetectionConfidenceLevel::HIGH) 
 ]); 
 $filterConfig = (new FilterConfig())->setRaiSettings($raiFilterSetting); 
 $floorSetting = (new FloorSetting()) 
 ->setName($floorSettingsName) 
 ->setFilterConfig($filterConfig) 
 ->setEnableFloorSettingEnforcement(true); 
 $updateRequest = (new UpdateFloorSettingRequest())->setFloorSetting($floorSetting); 
 $response = $client->updateFloorSetting($updateRequest); 
 printf("Floor setting updated: %s\n", $response->getName()); 
 }

    • Update the Model Armor floor setting for a given organization.

        use Google\Cloud\ModelArmor\V1\Client\ModelArmorClient; 
 use Google\Cloud\ModelArmor\V1\RaiFilterType; 
 use Google\Cloud\ModelArmor\V1\DetectionConfidenceLevel; 
 use Google\Cloud\ModelArmor\V1\UpdateFloorSettingRequest; 
 use Google\Cloud\ModelArmor\V1\FilterConfig; 
 use Google\Cloud\ModelArmor\V1\FloorSetting; 
 use Google\Cloud\ModelArmor\V1\RaiFilterSettings; 
 use Google\Cloud\ModelArmor\V1\RaiFilterSettings\RaiFilter; 
 /** 
 * Updates the floor settings for a given organization. 
 * 
 * @param string $organizationId The organization Id for which the floor settings is to be updated. 
 * 
 */ 
 function update_organization_floor_settings(string $organizationId) 
 { 
 $client = new ModelArmorClient(); 
 $floorSettingsName = sprintf('organizations/%s/locations/global/floorSetting', $organizationId); 
 // Build the floor settings with your preferred filters 
 // For more details on filters, please refer to the following doc: 
 // https://cloud.google.com/security-command-center/docs/key-concepts-model-armor#ma-filters 
 $raiFilterSetting = (new RaiFilterSettings()) 
 ->setRaiFilters([ 
 (new RaiFilter()) 
 ->setFilterType(RaiFilterType::HATE_SPEECH) 
 ->setConfidenceLevel(DetectionConfidenceLevel::HIGH) 
 ]); 
 $filterConfig = (new FilterConfig())->setRaiSettings($raiFilterSetting); 
 $floorSetting = (new FloorSetting()) 
 ->setName($floorSettingsName) 
 ->setFilterConfig($filterConfig) 
 ->setEnableFloorSettingEnforcement(true); 
 $updateRequest = (new UpdateFloorSettingRequest())->setFloorSetting($floorSetting); 
 $response = $client->updateFloorSetting($updateRequest); 
 printf("Floor setting updated: %s\n", $response->getName()); 
 }

    Python

    To run this code, first set up a Python development environment and install the Model Armor Python SDK .

    Review findings about floor setting violation

    Each Model Armor finding identifies a floor setting violation. A violation occurs when a Model Armor template fails to meet the minimum security standards defined by the resource hierarchy's floor settings. Floor settings define the minimum requirements for templates.

    Findings are generated when any of the following floor setting violations occur:

    • A template with less restrictive settings is created before you configure floor settings.
    • A template is missing required filters.
    • A template does not meet the minimum confidence level for the filters.

    When the system detects a violation, the system generates a high-severity finding in Security Command Center (if you use the Premium or Enterprise service tier of Security Command Center ). The finding specifies the violated floor setting, the non-compliant template, and details about the violation.

    The following example shows the finding's sourceProperties field. This violation, related to the malicious URI filter, occurred because the template setting for maliciousUriFilterSettings is DISABLED, but the floor settings require it to be ENABLED.

     { 
  
 "filterConfig" 
 : 
  
 { 
  
 "raiSettings" 
 : 
  
 { 
  
 "raiFilters" 
 : 
  
 [ 
  
 { 
  
 "filterType" 
 : 
  
 "HATE_SPEECH" 
 , 
  
 "confidenceLevel" 
 : 
  
 { 
  
 "floorSettings" 
 : 
  
 "LOW_AND_ABOVE" 
 , 
  
 "template" 
 : 
  
 "MEDIUM_AND_ABOVE" 
  
 } 
  
 }, 
  
 { 
  
 "filterType" 
 : 
  
 "HARASSMENT" 
 , 
  
 "confidenceLevel" 
 : 
  
 { 
  
 "floorSettings" 
 : 
  
 "MEDIUM_AND_ABOVE" 
 , 
  
 "template" 
 : 
  
 "HIGH" 
  
 } 
  
 } 
  
 ] 
  
 }, 
  
 "piAndJailbreakFilterSettings" 
 : 
  
 { 
  
 "confidenceLevel" 
 : 
  
 { 
  
 "floorSettings" 
 : 
  
 "LOW_AND_ABOVE" 
 , 
  
 "template" 
 : 
  
 "HIGH" 
  
 } 
  
 }, 
  
 "maliciousUriFilterSettings" 
 : 
  
 { 
  
 "floorSettings" 
 : 
  
 "ENABLED" 
 , 
  
 "template" 
 : 
  
 "DISABLED" 
  
 } 
  
 } 
 }

    What's next
    Design a Mobile Site
    View Site in Mobile | Classic
    Share by: