全1件 (1件中 1-1件目)
1
こんばんは、ナインです中々寝付けそうにないのでブログでも書くことにしました現在トレード企画こちら 27日23:00までSPRINGプレ企画こちら 31日23:00までを開催中ですよければ参加してみてくださいm(_ _)m さて、今回はナイン式のオリカ作成の流れを簡単に紹介してみようと思います。【道具編】だいたい100円ショップで揃えています。・カッター 100円・カッティングマット 100円・ペイントマーカー(油性) 100円・彫刻刀 5本で1000円(丸刀のみ使用)・定規3個 100円・ハサミ 100円・両面テープ(幅20mm、10mm) 100円・ラミネーフィルム(定期用100枚入り) 300円 ラミネーター・OHPフィルム 50枚 2600円・つやなしスーパーファイン 100枚入り 厚さ0.11mm 800円・プリンター Canon MP500 複合機・ホログラムシート 200mm×10m 5755円こんな感じです。 【ソフト編】・ウェブアートデザイナー(HP編集ソフト付属) wad・フォトショップ5.5・Microsoft Word基本的にwadで編集しています。たまに上手く保存できていないことがあるためフォトショップを使用し再保存しています。他にも背景の加工でフォトショップを使用しています。ワードは印刷時に使用しています。A4サイズの用紙に9枚印刷できるようにしています。 【作成手順】1:まずは画像をプリンターで取り込みます。複合機付属のソフトで解像度600dpiで取り込み、これを縮小して使っていきます。 2:編集はwadで行います。カードのフレームは1枚ごとにたいてい作っていますが最近は基本形に削ったり足したりしてますねサイズはいつも1050×750くらいで編集しています。数字やフォントに関しては色んなカードをスキャンして組み合わせて作ったりフォントを打ち込んで作ったりとその時に応じて様々です。キャラ画像もこの時にフレームに合わせ縮小しています。 3:画像は出来上がったらpng形式で保存しています。背景は一番後ろに配置できるようにし、色合いを見ながらカードサイズに切り取り、再度png形式で保存します。 4:画像が出来上がったらワードを起動しカードが9枚収まるサイズに余白を変更し、カード画像を88×63のサイズに縮小して配置します。 5:印刷ボタンでプロパティを開き印刷設定を行います。用紙設定は「高品位用紙」「きれい」「印刷前にプレビュー」と設定しプレビュー時に拡大して実際どのように印刷されるか確認して問題がなければ印刷をします。キラ仕様にする時はOHPフィルムノーマル仕様ならつやなし用紙に印刷します。印刷後はすぐに触るとインクが剥がれるのでしばらくおきます。 6:ハサミで1枚ごとに切り分けラミネートフィルムを表面に貼り付けるため印刷したカードの裏同士を重ねフィルムにはさみラミネーターにかけます。これで多少のキズはなんとかなりますし、もし致命的なキズがついてもフィルムだけ剥がせば大丈夫なこともあります私はいつも1枚のラミネートフィルムに表の画像とコードのついた裏面を重ねて1枚として作業しています。 7:ラミネーティングした後はフィルム同士がくっついた部分をハサミで切り表面だけにフィルムが貼りついた状態にします。 8:キラ仕様の場合は白塗りをします。裏面にペイントマーカーで光らせたくない部分を塗っていき、乾くのを待ちます。 9:乾いたらホログラムシートを白塗りした部分の上に慎重に貼り付け余分な部分をカッターで切ります。 10:裏面となる部分に両面テープを貼り、貼り付け位置がずれないように直角に定規をあてカードの表面をゆっくりと貼り付けます。 11:余分な部分をカッターで切ります。角は彫刻刀で切り取ります。カードの余分な部分をカットした時にラミネートフィルムが剥がれていることもあるため最後にラミネーターにかけます。 以上で完成です~ とりあえずこんな流れでいつも作っています書いてるうちに眠くなってきましたので、またです
2009年03月23日
コメント(17)