- Previous Article
- Next Article
- Table of Contents
Clean Technology, Vol.28, No.1, 79-93, March, 2022
첨단 전자산업 폐수처리시설의 Water Digital Twin(II): e-ASM 모델 보정, 수질 예측, 공정 선택과 설계
Water Digital Twin for High-tech Electronics Industrial Wastewater Treatment System (II): e-ASM Calibration, Effluent Prediction, Process selection, and Design
E-mail:
초록
본 연구에서는 Part I에서 제안한 첨단 전자산업 폐수처리시설 특화 Water Digital Twin모델인 e-ASM을 이용하여 랩-파일럿 처 리장 데이터를 바탕으로 모델 보정(Calibration), 유입 성상에 따른 제거 효율, 유출수 예측 및 최적 공법 선정을 수행하였다. 첨단 전자산업 폐수처리시설의 특화 모델링을 위하여, 민감도 분석을 통해 e-ASM 모델의 정합성과 상관성이 높은 동역학적 파라미 터를 선정하였고, 다중반응표면분석법 (Multiple response surface methodology, MRS)을 이용하여 동역학적 파라미터를 보정하 였다. e-ASM 모델의 보정 결과, Lab-scale, Pilot-scale 단위의 실험데이터와 90% 이상의 높은 정합성을 보였다. 그리고 4가지 유 기폐수 처리처리공법인 MLE, A2/O, 4-stage MLE-MBR, Bardenpho-MBR을 제안한 Water Digital Twin으로 구현하여 유입 폐수 의 성상별 운전조건에 따라 제거효율을 분석하였으며, Bardenpho-MBR이 C/N ratio 변화에서도 안정적으로 COD (Chemical oxygen demand)를 90% 이상 제거하며 높은 총 질소 제거 효율을 보였다. 그리고 유입 폐수의 조건별 Bardenpho-MBR공정의 수리학적 체류시간(Hydraulic retention time, HRT)이 3일 이상일 때 1,800 mg L-1의 고농도 TMAH 폐수를 98% 이상 제거할 수 있음을 확인할 수 있었다. 이와 같이, 본 연구에서 개발한 e-ASM은 전자산업 제조시설별, 유입 폐수의 성상별 특화 모델링을 통 해 높은 정합성을 가진 전자산업 폐수처리공정의 Water Digital Twin를 구현할 수 있고, 최적운전, Water AI, 최적가용기법 선정 등의 응용 가능성을 바탕으로 지속 가능한 첨단전자 산업을 위해 활용될 수 있을 것으로 사료된다.
In this study, an electronics industrial wastewater activated sludge model (e-ASM) to be used as a Water Digital Twin was calibrated based on real high-tech electronics industrial wastewater treatment measurements from lab-scale and pilot-scale reactors, and examined for its treatment performance, effluent quality prediction, and optimal process selection. For specialized modeling of a high-tech electronics industrial wastewater treatment system, the kinetic parameters of the e-ASM were identified by a sensitivity analysis and calibrated by the multiple response surface method (MRS). The calibrated e-ASM showed a high compatibility of more than 90% with the experimental data from the lab-scale and pilot-scale processes. Four electronics industrial wastewater treatment processes—MLE, A2/O, 4-stage MLE-MBR, and Bardenpo-MBR—were implemented with the proposed Water Digital Twin to compare their removal efficiencies according to various electronics industrial wastewater characteristics. Bardenpo-MBR stably removed more than 90% of the chemical oxygen demand (COD) and showed the highest nitrogen removal efficiency. Furthermore, a high concentration of 1,800 mg L-1 TMAH influent could be 98% removed when the HRT o f the Bardenpho-MBR process was more than 3 days. Hence, it is expected that the e-ASM in this study can be used as a Water Digital Twin platform with high compatibility in a variety of situations, including plant optimization, Water AI, and the selection of best available technology (BAT) for a sustainable high-tech electronics industry.
Keywords:
Water Digital Twin
; High-tech electronics industrial wastewater
; Model calibration
; Effluent quality prediction,
; Process selection
- Oh SE, Chae HB, Choo TH, J. Korean Soc. Environ. Technol. , 17(3), 181 (2016)
- MICHELIS ID, RENZO AD, SARAULLO M, VEGLIO F, DEStech Trans. Environ. Energy Earth Sci. , 27 (2017)
- Wu YJ, Whang LM, Huang SJ, Yang YF, Lei CN, Cheng SS, “Evaluation of performance and microbial ecology of sequencing batch reactor and membrane bioreactor treating thin-film transistor liquid crystal display wastewater,” 1085-1094 (2008).
- Fukushima T, Whang LM, Chen PC, Putri DW, Chang MY, Wu YJ, Lee YC, “Linking TFT-LCD wastewater treatment performance to microbial population abundance of Hyphomicromium and Thiobacillusspp.,” No. 141, 131-137 (2013).
- Cheng H, Liu C, Lei Y, Chiu Y, Mangalidan J, Wu C, Wu Y, Whang L, Chemosphere , 236, 124291 (2019)
- Raghuvanshi S, Gupta S, J. Biotechnol. Biomater. (13), 1 (2013)
- National Institute of Environmental Research, “Guidelines on Best Available Techniques for Environmental Pollution Prevention and Integrated Management in Semiconductor Manufacturing Industry,” 177-261 (2020).
- Wu YJ, Irmayani L, Setiyawan AA, Whang LM, Chemosphere , 258, 1 (2020)
- Hockenbury MR, Grady CPL, J. Water Pollut. Control Fed. , 49(5), 768 (1977)
- Kang CK, “Technological consideration on the domestic production of high quality recycled semiconductor wastewater for industrial purpose,” Ph.D. Dissertation, Youngnam university (2017).
- Weon KJ, “A Study on the Pre-treatment of Biological Processes for High-concentration Semiconductor Cleaning Wastewater,” Ph.D. Dissertation, Chungbuk National University, 55 (2018).
- Park MS, Yoo CK, J Korean Soc Environ Eng. , 2 (2020)
- Liu B, Yoshinaga K, Wub J, Chen W, Terashima M, Goel R, Pangallo D, Yasui H, Biochem. Eng. J. , 114, 42 (2016)
- Chen TK, Chen JN, Ni CH, Lin GT, Chang CY, Water Sci. Technol. , 48(8), 195 (2003)
- Wu YJ, Whang LM, Huang SJ, Yang YF, Lei CN, Cheng SS, Water Sci. Technol. , 58(5), 1085 (2008)
- Holmes E, Loo RL, Stamler J, Bictash M, Yap IKS, Chan Q, Ebbels T, De Iorio M, Brown IJ, Veselkov KA, Nature , 453, 396 (2008)
- Son JR, Lee KJ, Kang S, Kim G, Yang GM, Mo CY, Seo Y, J. Biosystens Eng.
- Lee SJ, Yoo CK, Choi SK, Chun HD, Lee IB, Korean Chem. Eng. Res. , 44(6), 579 (2006)
- Lee GH, Hwangbo SH, Yoo CK, Korean Chem. Eng. Res. , 56(4), 479 (2018)
- Kwon JB, Lee JS, Lee SH, Jeon CH, Kim KJ, J. The Korean Operations Research Management Science Society , 39 (2004)
- Jeong IJ, Knowledge Management Review(KMR) , 21(1), 27 (2020)
- Kim MH, Yoo CK, 2008 Int. Conf. Control. Autom. Syst. ICCAS 2008 , 2604 (2008)
- Kim MH, Rao AS, Yoo CK, Ind. Eng. Chem. Res. , 48(13), 6363 (2009)
- Oh TS, Kim MJ, Lim JJ, Kim YS, Yoo CK, Korean Chem. Eng. Res. , 49(2), 187 (2011)
- Phan HV, Hai FI, Ren, Zhang, Kang, Jinguo, Price WE, Nghiem LD, Fac. Eng. Inf. Sci. - Pap. Part A. (4972), 1 (2016)
- Fu Z, Yang F, An Y, Xue Y, Biochem. Eng. J. , 43, 191 (2009)
- Lee HS, Kim KI, Heo J, Kim KJ, Kim JS, Lee JJ, Jung IH, J. KSWW & J. Korean Soc. Water Environ , 1 (2009)
- Whang LM, Wu YJ, Lee YC, Chen HW, Fukushima T, Chang MY, Cheng SS, Hsu SF, Chang CH, Bioresour. Technol. , 122, 70 (2012)