Do you have any Working or Non-working Remotes Now?

Yes : Then try our Remote Quick-Find or continue on with the form below:
No : Email us for further instructions or fill out this form the best you can!

Did you have a 1, 2, 3, 4 or 5 Button Remote or a 2 Way LCD/LED Pager?

---Please make a Selection--- 1 Button Remote 2 Button Remote 3 Button Remote 4 Button Remote 5 Button Remote 2 Way LCD Remote 2 Way LED Remote Not Sure

Did the Remote Flash Green Red Blue Orange or LCD/LED Screen?

---Please make a Selection--- It Flashed Green It Flashed Red It Flashed Blue It Flashed Orange It has a LCD Screen It has a LED Screen Not Sure

Did it have Gray Buttons, Black Buttons or Icon Buttons?

---Please make a Selection--- Black Buttons Gray Buttons Icon Buttons Not Sure

Does your existing Remote have the following Words on the Back of the Case?

---Please make a Selection--- 2/12 Codes 2/29 Codes 2/37 Codes 2/66 Codes 2/66 Rolling Codes 302 MHZ 434 MHZ 68 Billion Rolling Codes 68 Billion 302 Rolling Codes Super Code Super Code SST Super Code Next Gen SST It does not show or too worn to read

Most DEI Remotes have a RPN (Replacement Part Number) on back of Case.

(Some Examples would be RPN 471, RPN 476, RPN 478V/P/C)

Do you know what Type of Alarm Remote Start or Keyless Entry you have?

---Please select a Brand--- Viper Python Sidewinder Hornet Automate Your Valet Clifford Avital Equalizer Boa Pro Guard Steal Stopper Rattler Wasp Autostart Not Sure (Some Examples would be Viper, Clifford, Hornet, Your Valet, Python)

Do you know the Model number Alarm/Remote Start or Keyless Entry you have?

(Some Examples would be 300HF, 550ESP, 710T, 791XV, 871P)

Please find the FCC ID# on the Back Case of your Old Remote (If applicable).

(Usually starts with FCC ID EZSDEI, H5LAL777A)

Is there a White Sticker on the inside of your existing Remote or on outside of the Main Alarm/Remote Start or Keyless Entry Brain (Units older than 7 years)? Please enter all the numbers and/or letters below (If applicable).

(Some Examples would be 322431A or 209AD. This is your Code!)

Look for Numbers and Letters on the inside of your existing Remote towards the Top Left, Side or Bottom Front of the Actual Remote Circuit Board . Please enter all the Numbers and/or Letters below (If applicable).

(Some Examples would be 777M, DT6B, DT4B, RTA4, 726G)

Look for a White Sticker off the Main Alarm Brain that has, for example, OK/9G. Or look for a Molded-in Dial that has a Pointer Pointing to Numbers or Letters. Helpful if you have a DEI Alarm, Remote Start or a Keyless Entry with no Remotes.

(An Example would be OK/9G)