Console
    Start free

    Configure your Alibaba Cloud resources

    After you configure your Google Cloud resources, configure your Alibaba Cloud resources.

    For the most up-to-date information about how to create a Virtual Border Router (VBR), see Create and manage a VBR in the Alibaba Cloud documentation.

    Create a Virtual Border Router (VBR)

    A VBR connects customer premises equipment to a Virtual Private Cloud (VPC) network and allows data transfer between them.

    To create a VBR, follow these steps.

    Console

    1. Log in to the Alibaba Cloud Express Connect console .

    2. On the Virtual Border Routerpage, click Create VBR, and then set the following parameters:

      1. For Physical Connection Interface, select Express Connect circuit, and then select the Express Connect circuit IDfrom the list.
      2. For VLAN ID, enter the VLAN ID that you used earlier when configuring Google resources.
      3. For Set VBR Bandwidth Value, enter your desired bandwidth.
      4. For IPv4 Address (Alibaba Cloud Gateway), enter the BGP peer IP address of the Google Cloud Router BGP peering.
      5. For IPv4 Address (Data Center Gateway), enter the Cloud Router BGP IP address of the Google Cloud Router BGP peering.

    3. Click OK.

    Create a VBR-to-VPC network connection

    To connect the VBR to a VPC network, follow these steps.

    Console

    1. In the Express Connect console, go to the VPC Peering Connections > VBR-to-VPCpage.

    2. Click Create Peering Connection, and then set the following parameters:

      1. For Initiator Region, select the region where you created the VBR.
      2. For Initiator VBR, select the VBR that you created.
      3. For Acceptor Region Type, select Intra-Regionif the VPC network is in the same region as the VBR. Select Inter-Regionif the VPC network is in a different region.
      4. For Acceptor VPC, select the VPC network that you want to connect to Google Cloud.
      5. Select the I have read and accept the Terms of Service for Express Connect Peering Connections (Pay-As-You-Go)checkbox.

    3. Click OK.

    Create a custom route in the VPC network

    To create a custom route in the VPC network, follow these steps:

    Console

    1. In the VPC console, on the Route Tablespage, click the route table.
    2. On the specific route table page, choose the Custom Routetab under the Route Entry Listtab.

    3. Click Add Route Entry, and then set the following parameters:

      1. For Destination CIDR Block, enter the VPC IP address range in Google Cloud.
      2. For Next Hop Type, select Router Interface (To VBR), click General Routing, and then select the VBR.

    4. Click OK.

    Create a custom route in the VBR

    To create a custom route in the VBR, follow these steps.

    Console

    1. In the Express Connect console, on the Virtual Border Routerpage, click the VBR.
    2. On the specific VBRpage, click the Routestab.

    3. Click Add Route, and then set the following parameters:

      1. For Next Hop Type, select VPC.
      2. For Destination CIDR Block, enter the VPC network IP address range on Alibaba Cloud.
      3. For Next Hop, select the VPC network.

    4. Click OK.

    Configure BGP peering in a VBR

    To set up BGP peering in the VBR, follow these steps.

    Console

    1. In the Express Connect console, on the Virtual Border Routerpage, click the VBR.
    2. On the corresponding VBRpage, click the BGP Groupstab.

    3. Click Create BGP Group, and then set the following parameters:

      1. For Peer ASN, enter the ASN that you specified in the Cloud Router on Google Cloud.
      2. If you configured BGP MD5 authentication on your Google Cloud Router BGP peering, for BGP Key, enter the BGP MD5 key.
      3. Click OK.

    4. On the corresponding VBRpage, click the BGP Peerstab.

    5. Click Create BGP Peer, and then set the following parameters:

      1. For BGP Group, select the BGP group.
      2. For BGP Peer IP, enter the VLAN attachment's Cloud Router BGP IP.
      3. If you enabled Bidirectional Forwarding Detection (BFD) on your Google Cloud Router BGP peering, check the Enable BFDoption.
      4. Click OK.

    6. On the corresponding VBRpage, click the Advertised BGP Subnetstab.

    7. Click Advertise BGP Subnet, and then set the following parameters:

      1. For Advertised Subnet, enter the VPC network IP address range on Alibaba Cloud.
      2. Click OK.
    Previous
    Configure your Google Cloud resources
    Next
    Verify your connections
    Create a Mobile Website
    View Site in Mobile | Classic
    Share by: