Use these instructions to troubleshoot issues with Google Cloud Armor security policies.
General issues
Debugging security policies
If you need additional information about what particular event triggers preconfigured rules, read Using request logging , and then enable verbose logging. Cloud Logging records a higher level of detail in your logs that you can use to analyze and debug your policies and rules.
Traffic is allowed despite a deny rule configured in the Google Cloud Armor security policy
To fix this, follow these steps:
-
Make sure that the Google Cloud Armor security policy is attached to a target backend service. For example, the following command describes all data associated with the backend service
BACKEND
. The results returned should include the name of the Google Cloud Armor security policy associated with this backend service.gcloud compute backend-services describe BACKEND
-
Review the HTTP(S) logs to determine which policy and rule were matched for your traffic along with the associated action. To view the logs, use Cloud Logging .
The following is a sample log of an allowed request with the interesting fields highlighted. Check for the following fields and make sure that they match the rule that you configured to deny the traffic:
-
configuredAction
should match the action configured in the rule. -
name
should match the name of the Google Cloud Armor security policy attached to this backend service. -
outcome
should matchconfiguredAction
. -
priority
should match the priority number of the rule.
httpRequest: remoteIp: 104.133.0.95 requestMethod: GET requestSize: '801' requestUrl: http://74.125.67.38/ responseSize: '246' serverIp: 10.132.0.4 status: 200 userAgent: curl/7.35.0 insertId: ajvis5ev4i60 internalId: projectNumber: '895280006100' jsonPayload: '@type': type.googleapis.com/google.cloud.loadbalancing.type.LoadBalancerLogEntry enforcedSecurityPolicy: configuredAction: ACCEPT name: mydev-policy-log-test1 outcome: ACCEPT priority: 2147483647 statusDetails: response_sent_by_backend logName: projects/mydev-staging/logs/requests resource: labels: backend_service_name: BACKEND_SERVICE_NAME forwarding_rule_name: FORWARDING_RULE_NAME project_id: PROJECT_ID target_proxy_name: TARGET_HTTP_PROXY_NAME url_map_name: URL_MAP_NAME zone: global type: http_load_balancer severity: INFO timestamp: '2017-04-18T18:57:05.845960288Z'
-
-
Review the hierarchy of rules to ensure that the correct rule is matched. It is possible that a higher priority rule with an allow action is matching your traffic. Use the
describe
command on thesecurity-policies
in the Google Cloud CLI to see the contents of the Google Cloud Armor security policy.For example, the following example shows how a higher priority allow rule (at priority 100) matches traffic coming from the 1.2.3.4 IP address, preventing the lower priority deny rule (at priority 200) from triggering and blocking the traffic.
gcloud compute security-policies describe POLICY_NAME
Output:
creationTimestamp: '2017-04-18T14:47:58.045-07:00 description: '' fingerprint: Yu5spBjdoC0= id: '2560355463394441057' kind: compute#securityPolicy name: POLICY_NAME rules: -action: allow description: allow high priority rule kind: compute#securityPolicyRule match: srcIpRanges: -'1.2.3.4/32' preview: false priority: 100 -action: deny description: deny lower priority rule kind: compute#securityPolicyRule match: srcIpRanges: -'1.2.3.0/24 preview: false priority: 200 -action: deny description: default rule kind: compute#securityPolicyRule match: srcIpRanges: -'*' preview: false priority: 2147483647 selfLink: http://www.googleapis.com/compute/v1/projects/bigclustertestdev0-devconsole/global/securityPolicies/sp
Preconfigured rule returns false positives
XSS and SQLi detection are based on static signature matching on HTTP request headers and other L7 parameters. These regular expression patterns are prone to false positives. You can use the preconfigured rule for XSS and SQLi detection in preview mode and then check the log for any false positives.
If you find a false positive, you can compare the traffic content with the ModSecurity CRS rules
.
If the rule is invalid or not relevant, disable it by using the evaluatePreconfiguredExpr
expression, and specify the rule's ID in the exclude ID list
argument.
After reviewing the logs and removing all false positives, disable the preview mode.
To add a preconfigured rule in preview mode:
-
Create a security policy with the preconfigured expression set in preview mode:
gcloud compute security-policies rules create 1000 --security-policy POLICY_NAME --expression "evaluatePreconfiguredExpr('xss-stable')" --action deny-403 --preview
-
Review the HTTP(S) logs for HTTP request fields such as
url
andcookie
. For example, therequestUrl
compares positively to the ModSecurity CRS rule ID 941180:httpRequest: remoteIp: 104.133.0.95 requestMethod: GET requestSize: '801' requestUrl: http://74.125.67.38/foo?document.cookie=1010" responseSize: '246' serverIp: 10.132.0.4 status: 200 userAgent: curl/7.35.0 insertId: ajvis5ev4i60 internalId: projectNumber: '895280006100' jsonPayload: '@type': type.googleapis.com/google.cloud.loadbalancing.type.LoadBalancerLogEntry enforcedSecurityPolicy: configuredAction: ACCEPT name: POLICY_NAME outcome: ACCEPT priority: 2147483647 preconfiguredExprIds: [ 'owasp-crs-v030001-id941180-xss' ] statusDetails: response_sent_by_backend logName: projects/mydev-staging/logs/requests resource: labels: backend_service_name: BACKEND_SERVICE forwarding_rule_name: mydev-forwarding-rule project_id: mydev-staging target_proxy_name: mydev-target-http-proxy url_map_name: mydev-url-map zone: global type: http_load_balancer severity: INFO timestamp: '2017-04-18T18:57:05.845960288Z'
-
Exclude the ModSecurity CRS rule ID 941180 by updating the rule in the Google Cloud Armor security policy:
gcloud compute security-policies rules update 1000 \ --security-policy POLICY_NAME \ --expression "evaluatePreconfiguredExpr('xss-stable', ['owasp-crs-v030001-id941180-xss'])" \ --action deny-403 \ --preview
-
Review the logs again and then disable preview mode to implement the rule.
Clients with denied signatures are not blocked or denied
If you are using Google Cloud Armor with Cloud CDN, security policies are enforced only for requests for dynamic content, cache misses, or other requests that are destined for the CDN origin server. Cache hits are served even if the downstream Google Cloud Armor security policy would prevent that request from reaching the CDN origin server.
Mitigate risk on POST body that exceeds 8 KB when using preconfigured WAF rules
When a preconfigured WAF rule is evaluated in a Google Cloud Armor security policy, up to 8 KB of the POST body is inspected for signature matches against the WAF rules. This approach provides you with low latency layer 7 inspection and protection, while maintaining availability for other Google customers.
You can mitigate the risk from larger POST requests by creating a rule in your security policies to make sure that no uninspected content reaches your backends. Create a rule to deny traffic that exceeds 8 KB (8192 bytes) in POST body size. The following code sample shows how to create this rule:
gcloud compute security-policies rules create 10 \ --security-policy my-policy \ --expression "int(request.headers['content-length']) > 8192" \ --action deny-403 \ --description "Block requests great than 8KB"
Issues with named IP address lists
This section provides information for resolving problems with named IP address lists.
IP addresses within a named IP address list
The IP addresses in the lists always match the IP addresses in the provider websites listed in the Google Cloud Armor named IP address lists guide. If you have questions about the lists, contact the Cloud Support team .
IP addresses within a named IP address list are stale in Google Cloud Armor
Google Cloud Armor synchronizes its lists with IP address list providers daily. It is possible to have stale data that lags a few hours or a day behind the data at a provider. However, if you believe that the stale data lags more than expected, for example, more than a week, contact the Cloud Support team .
Difficulty creating a security policy that references a named IP address list
You might try to create a security policy that references a named IP address list, using a command such as this:
gcloud compute security-policies rules create 750 \ --security-policy my \ --expression "evaluatePreconfiguredExpr('sourceiplist-example')" \ --action "allow"
If the command fails, the error that you see looks something like this:
ERROR: (gcloud.compute.security-policies.rules.create) Could not fetch resource: - Invalid value for field 'resource.match.expr': '{ "expression": "evaluatePreconfiguredExpr(\u0027sourceiplist-example\u0027)"}'. Error parsing Google Cloud Armor rule matcher expression: sourceiplist-example is not a valid preconfigured expression set.
Make sure that the particular provider is supported, and that the name of the IP
address list is given correctly. You can check this by using the following gcloud
command to list the current preconfigured expression sets:
gcloud compute security-policies list-preconfigured-expression-sets
Traffic is blocked despite a preconfigured rule for a named IP address allowlist
You might find that traffic is blocked from an IP address that is on a named IP address list:
-
Make sure that traffic is coming from an IP address that is on a named IP address allowlist .
-
Check whether there are other security rules with a higher priority that can block the traffic. If you still see the issue, contact the Cloud Support team .
-
Make sure that the security policy is attached to the correct backend service:
gcloud compute backend-services describe BACKEND_SERVICE
-
Check the rules that are in the security policy. For example:
gcloud compute security-policies describe POLICY_NAME
The command returns information similar to the following:
--- … name: POLICY_NAME rules: -action: allow description: allow fastly ip addresses kind: compute#securityPolicyRule match: expr: expression: evaluatePreconfiguredExpr('sourceiplist-fastly') preview: false priority: 100 -action: deny(403) description: Default rule, higher priority overrides it kind: compute#securityPolicyRule match: config: srcIpRanges: -'*' versionedExpr: SRC_IPS_V1 preview: false priority: 2147483647 -action: deny(404) description: deny altostrat referer kind: compute#securityPolicyRule match: expr: expression: request.headers['Referer'].contains('altostrat') preview: false priority: 50 …
The preceding security policy contains three rules: a default deny rule, an allow rule for Fastly's IP addresses , and a deny rule for a referrer that contains
altostrat
. Their respective priorities are also listed. -
Review the logs to determine which rule is matched to your traffic and the associated action. For information about logging, see Using the Logs Explorer .
The following is an example of a log:
httpRequest: { referer: "http://www.altostrat.com/" remoteIp: "23.230.32.10" requestMethod: "HEAD" requestSize: "79" requestUrl: "http://www.example.com/" responseSize: "258" status: 404 userAgent: "Mozilla/5.0" } … jsonPayload: { @type: "type.googleapis.com/google.cloud.loadbalancing.type.LoadBalancerLogEntry" enforcedSecurityPolicy: { configuredAction: "DENY" name: " POLICY_NAME " outcome: "DENY" priority: 50 } statusDetails: "denied_by_security_policy" } …
From the preceding log, the request is coming from
23.230.32.10
, which is covered by Fastly's public IP address list . However, the request is matched with a deny rule of a higher priority of 50. Comparing this with what's in the security policy, the rule corresponds to the deny rule for a referer that containsaltostrat
. Because the request has a referer ofhttp://www.altostrat.com/
, the security rule enforcement is working correctly.
Issues with Security Command Center findings
This section contains information about issues with Security Command Center findings.
The Google Cloud Armor card does not appear in the Security Command Center
Enable Google Cloud Armor findings in the Security Command Center interface.
Findings from Google Cloud Armor do not appear in the Security Command Center
If findings from Google Cloud Armor do not appear in the Security Command Center, traffic to the backend services might not meet the criteria for raising a finding.
For questions about traffic volume to your backends, check request statistics in the Cloud Monitoring dashboards under the Network Security Policies .
Findings are too noisy
For assistance with this issue, contact the Cloud Support team .
Issues with Google Cloud Armor Adaptive Protection
Use these instructions to help you resolve issues with Adaptive Protection.
Adaptive Protection is enabled for a security policy but there are no logs in Cloud Logging
Adaptive Protection logs are generated separately from Google Cloud Armor request logs and appear under a different resource in Cloud Logging. Adaptive Protection logs and events are under the Network Security Policyresource in Cloud Logging. There is a training period of at least an hour after Adaptive Protection is enabled in a security policy before Adaptive Protection starts generating alerts for suspected attacks. During the training period, Adaptive Protection learns from incoming request traffic and develops distinct baselines for each backend service that is protected by that security policy. Adaptive Protection is subsequently able to identify suspicious activity.
If you enable Adaptive Protection for a security policy and you don't observe any alerts after a one-hour training period, this suggests that there is no activity that can be identified as potentially malicious targeting of any of the backend services associated with that security policy.
If the potential attack or anomalous traffic persists for longer periods of time, exceeding several hours, then Adaptive Protection starts to deem that behavior as baseline behavior and does not continue to alert on similar traffic patterns. After the potential attack subsides and traffic patterns go back to the original baseline, either because the attack concluded or you blocked it with the appropriate Google Cloud Armor rules, Adaptive Protection alerts on future traffic behaviors that are considered departures from the baseline.
Adaptive Protection analyzes traffic that would otherwise be allowed through a Google Cloud Armor security policy. If you set the default rule to deny access with a restricted allowlist of traffic, then Adaptive Protection only detects malicious activity on the traffic that passes evaluation with respect to the allowlist.
There are too many alerts or too many logs in Cloud Logging from Adaptive Protection
An Adaptive Protection alert provides a confidence score, indicating how strongly Adaptive Protection models identify the detected activity as anomalous and potentially an attack. You can filter on the log's specific entry through Cloud Logging to only surface (or forward to downstream) the alerts that have a confidence score above a particular threshold.
Adaptive Protection provides a mechanism for reporting alerts as false positives, which is described in the section Monitoring, feedback and reporting event errors . Note that false positive reporting might not result in immediate changes to what Adaptive Protection alerts on. Over time, Adaptive Protection models learn that such traffic patterns are normal and acceptable, and Adaptive Protection stops alerting on these patterns.
If Adaptive Protection alerts are too frequent on a subset of backend services in a security policy, it might suggest that these backend services' normal traffic has significant fluctuations that are constantly identified by Adaptive Protection as anomalous behaviors. You can create a separate security policy without Adaptive Protection enabled and associate these backend services with the new security policy.
A particular incident reported by Adaptive Protection is considered a false positive or is not relevant
Adaptive Protection provides a mechanism for reporting false positive alerts. Follow the procedure described in the section Monitoring, feedback and reporting event errors . Note that false positive reporting might not result in immediate changes to what Adaptive Protection alerts on. Over time, Adaptive Protection models learn that such traffic patterns are normal and acceptable, and Adaptive Protection stops alerting on these patterns.
How do I know that my edge security policies are being enforced?
You can check the actions taken on your edge security policies by checking the monitoring dashboards, monitoring metrics, or per-request logging.
Monitoring dashboards
Cloud Monitoring is available on the Network Security Policiespage under Monitoring. You can use the breakdown by security policy on the page to measure the number of requests allowed and denied by the configured edge security policy. You can also examine the breakdown by backend service to debug a particular backend service. For details about the Cloud Monitoring dashboard, see Monitoring Google Cloud Armor security policies .
Monitoring metrics
Raw metrics that measure the requests allowed and denied are available for edge security policies. For more information, see Monitoring metrics for security policies .
Per-request logging
The edge security policy decision is logged to the load balancing request logs
under enforcedEdgeSecurityPolicy
. This is separate from the enforcedSecurityPolicy
, which captures the backend security policy decision.
Bot management
This section contains information about troubleshooting issues with bot management.
Users are not exempted as expected
You might have configured security policy rules with the redirect action for reCAPTCHA assessment, and find that some users that you think are legitimate were not exempted as expected. Follow the steps below for troubleshooting.
First, check in the per-request logs to see whether there is a security policy
rule with a higher priority that matches the traffic, in which the action is
different. In particular, look for the configured_action
and outcome
fields.
Note that for a user to be exempted, at least two requests are involved. The
initial request comes without an exemption cookie, and the follow-on requests
come with an exemption cookie if the user passes the reCAPTCHA
assessment. Therefore, at least two log entries are expected.
- If you see
GOOGLE_RECAPTCHA
as the configured action, andREDIRECT
as the outcome, the request was redirected for reCAPTCHA assessment; - If you see
GOOGLE_RECAPTCHA
as the configured action, andACCEPT
as the outcome, the request was exempted from being redirected for reCAPTCHA assessment. - If you see different values in the above fields, a rule with a different action was matched. In that case, it is expected that the user is not redirected or exempted.
Second, there are several requirements on the user's side for them to be exempted from being redirected for reCAPTCHA assessment.
- The user must be using a browser.
- The browser must enable JavaScript to allow proper loading of the redirect page with reCAPTCHA JavaScript embedded.
- The browser must enable cookies to allow the setting and auto-attaching of the exemption cookie.
- The user must pass reCAPTCHA assessment; for example, they must resolve pop-up challenges if there are any.
Expect that users who cannot meet any of the above requirements will not receive exemption, even if a rule with the redirect action for reCAPTCHA assessment is matched.
Third, reCAPTCHA assessment is only executed when the redirect page that embeds the reCAPTCHA JavaScript is rendered. For that reason, redirecting for reCAPTCHA assessment is only applicable for requests that expect a response leading to a full page render. Other requests, such as assets loading within a page, or requests stemming from an embedded script that do not expect the response to be rendered, are not expected to get reCAPTCHA assessment. As such, we recommend that you apply this action with a match condition for URL paths that satisfy this condition.
For example, suppose that you have a webpage that contains embedded elements like images, links to other webpages, and scripts. You do not want to apply the redirect action for reCAPTCHA assessment for URL paths that host images, or that are supposed to be accessed by scripts where a full page render is not expected. Instead, you can apply the redirect action for reCAPTCHA assessment for URL paths that host webpages, like the main webpage or other linked webpages.
Finally, if the redirect page is rendered successfully, check in the Developer Tool provided by the browser to see whether an exemption cookie is set and whether it is attached in the follow-on requests for the same site. For further assistance, you can contact the Cloud Support team.
Issues with rate limiting
Traffic is not throttled as expected
You might find that a client IP address is sending high levels of traffic to an application at a rate that exceeds the threshold you set, but the traffic is not throttled as you expect. Follow these steps to investigate the issue.
First, confirm whether a higher-priority rule is allowing traffic from that IP
address. Examine the logs to see whether an ALLOW
rule was triggered for the IP
address. This could be an ALLOW
rule on its own, or in another THROTTLE
or RATE_BASED_BAN
rule.
If you find a higher-priority rule, do one of the following:
- Change the priorities to ensure that the rate-limiting rule has a higher priority, by assigning it a lower numerical value.
- Exclude the IP address from the matched expression in the rule that has a higher priority.
The issue might also be that the threshold is set incorrectly. If this is the case, the requests are matched accurately, but the conform action is triggered. Examine the logs to confirm that this is the case, then reduce the threshold in your rule.
Lastly, the IP address might not match the throttle or rate-based ban rule. To fix this, check for a mistake in the match condition, then change the rule's match condition to the correct value.