Collect Check Point SmartDefense logs

This document explains how to ingest Check Point SmartDefense logs to Google Security Operations using Bindplane. The parser extracts fields from Check Point SmartDefense syslog formatted logs. It uses grok or kv to parse the log message and then maps these values to the Unified Data Model (UDM). It also sets default metadata values for the event source and type.

Before you begin

Make sure you have the following prerequisites:

• A Google SecOps instance.
• A Windows 2016 or later, or a Linux host with systemd .
• If running behind a proxy, ensure firewall ports are open per the Bindplane agent requirements.
• Privileged access to the Check Point SmartDefense management console or appliance.

Get Google SecOps ingestion authentication file

1. Sign in to the Google SecOps console.
2. Go to SIEM Settings > Collection Agent.
3. Download the Ingestion Authentication File.
   • Save the file securely on the system where Bindplane will be installed.

Get Google SecOps customer ID

1. Sign in to the Google SecOps console.
2. Go to SIEM Settings > Profile.
3. Copy and save the customer IDfrom the Organization Detailssection.

Install the Bindplane agent

Install the Bindplane agent on your Windows or Linux operating system according to the following instructions.

Windows installation

1. Open the Command Promptor PowerShellas an administrator.

2. Run the following command:

     msiexec 
     
    / 
    i 
     
    "https://github.com/observIQ/bindplane-agent/releases/latest/download/observiq-otel-collector.msi" 
     
    / 
    quiet 
    
   

Linux installation

1. Open a terminal with root or sudo privileges.

2. Run the following command:

    sudo  
   sh  
   -c  
    " 
    $( 
   curl  
   -fsSlL  
   https://github.com/observiq/bindplane-agent/releases/latest/download/install_unix.sh ) 
    " 
     
   install_unix.sh 
   

Additional installation resources

For additional installation options, consult the installation guide .

Configure the Bindplane agent to ingest Syslog and send to Google SecOps

1. Access the configuration file:

   • Locate the config.yaml file. Typically, it's in the /etc/bindplane-agent/ directory on Linux or in the installation directory on Windows.
   • Open the file using a text editor (for example, nano , vi , or Notepad).

2. Edit the config.yaml file as follows:

     receivers 
    : 
     
    udplog 
    : 
     
    # Replace the port and IP address as required 
     
    listen_address 
    : 
     
    "0.0.0.0:514" 
    exporters 
    : 
     
    chronicle/chronicle_w_labels 
    : 
     
    compression 
    : 
     
    gzip 
     
    # Adjust the path to the credentials file you downloaded in Step 1 
     
    creds_file_path 
    : 
     
    '/path/to/ingestion-authentication-file.json' 
     
    # Replace with your actual customer ID from Step 2 
     
    customer_id 
    : 
     
   < customer_id 
   >  
    endpoint 
    : 
     
    malachiteingestion-pa.googleapis.com 
     
    # Add optional ingestion labels for better organization 
     
    log_type 
    : 
     
    'CHECKPOINT_SMARTDEFENSE' 
     
    raw_log_field 
    : 
     
    body 
     
    ingestion_labels 
    : 
    service 
    : 
     
    pipelines 
    : 
     
    logs/source0__chronicle_w_labels-0 
    : 
     
    receivers 
    : 
     
    - 
     
    udplog 
     
    exporters 
    : 
     
    - 
     
    chronicle/chronicle_w_labels 
    
   

   • Replace the port and IP address as required in your infrastructure.
   • Replace <CUSTOMER_ID> with the actual customer ID.
   • Update /path/to/ingestion-authentication-file.json to the path where the authentication file was saved in the Get Google SecOps ingestion authentication file section.

Restart the Bindplane agent to apply the changes

• To restart the Bindplane agent in Linux, run the following command:

   sudo  
  systemctl  
  restart  
  observiq-otel-collector 
  

• To restart the Bindplane agent in Windows, you can either use the Servicesconsole or enter the following command:

   sc stop observiq-otel-collector && sc start observiq-otel-collector 
  

Configure Syslog forwarding on Check Point SmartDefense

The following sections describe the steps for setting up Syslog forwarding on CheckPoint SmartDefense,

Step 1: Create Log Exporter/SIEM Object in SmartConsole

1. Sign in to the Check Point SmartConsole.
2. Go to Objects > More object types > Server > Log Exporter/SIEM.
3. Click Newto create a new Log Exporter object.
4. Provide the following configuration details:
   • Object Name: Enter a descriptive name (for example, Google SecOps Bindplane ).
   • Export Configuration: Select Enabled.
   • Target Server: Enter the Bindplane agent IP address.
   • Target Port: Enter 514 (or your configured Bindplane agent port number).
   • Protocol: Select UDP.
5. Go to the Data Manipulationpage.
6. Provide the following configuration details:
   • Format: Select Common Event Format (CEF).
   • Timezone: Select UTC time zone for universal consistency across systems.
7. Click OKto save the configuration.

Step 2: Configure Management Server or Log Server

1. In SmartConsole, go to Gateways & Servers.
2. Open your Management Serveror Dedicated Log Server/SmartEvent Serverobject.
3. Go to Logs > Export.
4. Click +and select the Log Exporter/SIEM object you configured earlier.
5. Click OK.

Step 3: Install Database Policy

1. From the top menu, click Install > Install database.
2. Select all objects.
3. Click Install.

Step 4: Verify Log Export Configuration

1. Connect to the command line on the Management Server-Log Server.
2. Sign in to Expertmode.

3. Run the following command to verify the configuration:

    cp_log_export  
   show 
   

4. To restart the Log Exporter if needed:

    cp_log_export  
   restart 
   

Need more help? Get answers from Community members and Google SecOps professionals.