Push and pull images

This page describes pushing and pulling container images with Docker. It also provides information about pulling images with the crictl tool if you are troubleshooting issues in Google Kubernetes Engine.

For information about deploying to Google Cloud runtime environments, see Deploy to Google Cloud .

For instructions on listing, tagging, and deleting images, see Managing images .

Before you begin

If the target repository does not exist, create a new repository .
You must have at least Artifact Registry Writer access to the repository.
Install Docker if it is not already installed.

Required roles

To get the permissions that you need to push and pull images, ask your administrator to grant you the following IAM roles on the repository:

Pull images: Artifact Registry Reader ( roles/artifactregistry.reader )
Tag and push images: Artifact Registry Writer ( roles/artifactregistry.writer )

For more information about granting roles, see Manage access to projects, folders, and organizations .

You might also be able to get the required permissions through custom roles or other predefined roles .

Authenticating to a repository

You must authenticate to repositories whenever you use Docker or another third-party client with a Docker repository. This section provides a quick summary of what you'll need to authenticate successfully. For detailed instructions, see Setting up authentication for Docker .

Using a credential helper

For the gcloud CLI credential helper or standalone credential helper , the Artifact Registry hosts you use must be in your Docker configuration file.

Artifact Registry does not automatically add all registry hosts to the Docker configuration file. Docker response time is significantly slower when there is a large number of configured registries. To minimize the number of registries in the configuration file, you add the hosts that you need to the file.

To confirm which hosts are configured, run the following command to display the contents of the configuration file:

Linux: cat ~/.docker/config.json
Windows: type %USERPROFILE%\.docker\config.json

The credHelpers section lists configured Artifact Registry Docker hosts. Host names end in -docker.pkg.dev . The following example shows some hosts configured for the gcloud CLI credential helper.

  "credHelpers" 
 : 
  
 { 
  
 "asia.gcr.io" 
 : 
  
 "gcloud" 
 , 
  
 "eu.gcr.io" 
 : 
  
 "gcloud" 
 , 
  
 "gcr.io" 
 : 
  
 "gcloud" 
 , 
  
 "marketplace.gcr.io" 
 : 
  
 "gcloud" 
 , 
  
 "northamerica-northeast1-docker.pkg.dev" 
 : 
  
 "gcloud" 
 , 
  
 "us-central1-docker.pkg.dev" 
 : 
  
 "gcloud" 
 , 
  
 "us-east1-docker.pkg.dev" 
 : 
  
 "gcloud" 
 , 
  
 "us.gcr.io" 
 : 
  
 "gcloud" 
 }

If a host you want to use is not in the list, run the credential helper again to add the host. For example, the following command adds us-west1-docker.pkg.dev .

gcloud CLI credential helper:

 gcloud  
auth  
configure-docker  
us-west1-docker.pkg.dev

Standalone credential helper

 docker-credential-gcr  
configure-docker  
us-west1-docker.pkg.dev

Using an access token

For access token authentication, you generate a token and use it as a password with the docker login command. Tokens are valid for 60 minutes, so you should authenticate shortly before you tag, push, or pull images.

The following example generates an access token using service account impersonation and then authenticates to Artifact Registry. You must have have permissions in the Service Account Token Creator role ( roles/iam.serviceAccountTokenCreator ) to generate a token this way.

Linux

 gcloud  
auth  
print-access-token  
 \ 
  
--impersonate-service-account  
 ACCOUNT 
  
 | 
  
docker  
login  
 \ 
  
-u  
oauth2accesstoken  
 \ 
  
--password-stdin  
https:// LOCATION 
-docker.pkg.dev

Windows

 gcloud  
auth  
print-access-token  
 \ 
--impersonate-service-account  
 ACCOUNT 
ya29.8QEQIfY_...

docker  
login  
-u  
oauth2accesstoken  
-p  
 "ya29.8QEQIfY_..." 
  
 \ 
https:// LOCATION 
-docker.pkg.dev

If you don't have permissions to impersonate a service account, you can activate the service account in your gcloud CLI session and then obtain a token. For details, see the instructions to set up access token authentication.

Using a service account key

For a service account key, you use the key as a password with the docker login command.

For example, the following command uses the base64-encoded service account key in the file key.json to authenticate to us-west1-docker.pkg.dev .

Linux

 cat  
key.json  
 | 
  
docker  
login  
-u  
_json_key_base64  
--password-stdin  
 \ 
https://us-west1-docker.pkg.dev

Windows

 docker  
login  
-u  
_json_key_base64  
--password-stdin  
https://us-west1-docker.pkg.dev < 
key.json

For details, see the instructions to set up service account key authentication.

Pushing an image

Repository modes :standard

To push a local image to a standard Docker repository, you tag it with the repository name and then push the image.

If your Artifact Registry Docker repository has tag immutability enabled, a tag must always reference the same image digest in the repository. You cannot use the tag on another version of the same image that you push to the repository. For more information about image digests, tags, and tag immutability, see Container image versions .

For large images, the following limits apply:

Upload time: If you authenticate to Artifact Registry using an access token, the token is only valid for 60 minutes. If you expect your upload time to exceed 60 minutes, use a different authentication method .
Image size: The maximum artifact size is 5 TB.; Artifact Registry does not support Docker chunked uploads . Some tools support uploading large images with either chunked uploads or a single monolithic upload . You must use monolithic uploads to push images to Artifact Registry.

Tagging the local image

Make sure that you are authenticated to the repository.
Determine the name of the image. The format of a full image name is:
```
  LOCATION 
-docker.pkg.dev/ PROJECT-ID 
/ REPOSITORY 
/ IMAGE 
 
```
Replace the following values:
- LOCATION is the regional or multi-regional location of the repository where the image is stored.
- PROJECT-ID is your Google Cloud console project ID . If your project ID contains a colon ( : ), see Domain-scoped projects .
- REPOSITORY is the name of the repository where the image is stored.
- IMAGE is the image's name. It can be different than the image's local name.
For example, consider an image with the following characteristics:
- Repository location: us-west1
- Repository name: my-repo
- Project ID: my-project
- Local image name: my-image
- Target image name: test-image
This image name for this example is:
```
 us-west1-docker.pkg.dev/my-project/my-repo/test-image 
```
Note: The name for the image that you will store in the repository can be different from the image name on your local machine.

For details about the image name format, including handling domain-scoped projects, see Repository and image names .
Tag the local image with the repository name.
```
 docker  
tag  
 SOURCE-IMAGE 
  
 LOCATION 
-docker.pkg.dev/ PROJECT-ID 
/ REPOSITORY 
/ IMAGE 
: TAG 
 
```
Replace SOURCE-IMAGE with the local image name or image ID and TAG with the tag. If you don't specify a tag, Docker applies the default latest tag.

If the immutable image tags setting is enabled, tags must be unique for each image version, including the latest tag. You cannot push an image to the repository if the tag is already used by another version of the same image in the repository. To verify if the setting is enabled for the repository, run the command:
```
 gcloud  
artifacts  
repositories  
describe  
 REPOSITORY 
  
 \ 
  
--project = 
 PROJECT-ID 
  
 \ 
  
--location = 
 LOCATION 
 
```
For the example image from the previous step, you would use the following command if the local image my-image is in the current directory:
```
 docker  
tag  
my-image  
us-west1-docker.pkg.dev/my-project/my-repo/test-image 
```
If you want to apply a specific tag, use the command:
```
 docker  
tag  
 SOURCE-IMAGE 
  
 LOCATION 
-docker.pkg.dev/ PROJECT-ID 
/ REPOSITORY 
/ IMAGE 
: TAG 
 
```
To use the tag staging with the example image, you add :staging to the command:
```
 docker  
tag  
my-image  
us-west1-docker.pkg.dev/my-project/my-repo/test-image:staging 
```

Push the tagged image to Artifact Registry

Make sure that you are authenticated to the repository.

If you used gcloud auth configure-docker or docker-credential-gcr configure-docker to configure your Docker client, verify that the target hostname is in your Docker configuration file .

Push the tagged image with the command:

 docker  
push  
 LOCATION 
-docker.pkg.dev/ PROJECT-ID 
/ REPOSITORY 
/ IMAGE

This command pushes the image that has the tag latest . If you want to push an image that has a different tag, use the command:

 docker  
push  
 LOCATION 
-docker.pkg.dev/ PROJECT-ID 
/ REPOSITORY 
/ IMAGE 
: TAG

When you push an image, it is stored in the specified repository.

After pushing your image, you can:

Go to the Google Cloud console to view the image.

Run the gcloud command to view the image's tags and automatically-generated digest:

 gcloud  
artifacts  
docker  
images  
list  
 \ 
 LOCATION 
-docker.pkg.dev/ PROJECT-ID 
/ REPOSITORY 
/ IMAGE 
  
 [ 
--include-tags ]

The following example output shows truncated image digests, but the command always returns the full image digest.

   
IMAGE  
DIGEST  
CREATE_TIME  
UPDATE_TIME  
us-west1-docker.pkg.dev/my-project/my-repo/my-image  
sha256:85f...  
 2019 
-04-10T15:08:45  
 2019 
-04-10T15:08:45  
us-west1-docker.pkg.dev/my-project/my-repo/my-image  
sha256:238...  
 2019 
-04-10T17:23:53  
 2019 
-04-10T17:23:53  
us-west1-docker.pkg.dev/my-project/my-repo/my-image  
sha256:85f...  
 2019 
-04-10T15:08:46  
 2019 
-04-10T15:08:46

Pulling images with Docker

Repository modes :standard, remote, virtual

Make sure that you are authenticated to the repository.

If you used gcloud auth configure-docker or docker-credential-gcr configure-docker to configure your Docker client, verify that the target hostname is in your Docker configuration file .
To pull from a repository, use the command:
```
 docker  
pull  
 LOCATION 
-docker.pkg.dev/ PROJECT-ID 
/ REPOSITORY 
/ IMAGE 
: TAG 
 
```
or
```
 docker  
pull  
 LOCATION 
-docker.pkg.dev/ PROJECT-ID 
/ REPOSITORY 
/ IMAGE 
@ IMAGE-DIGEST 
 
```
Replace the following values:
- LOCATION is the regional or multi-regional location of the repository where the image is stored.
- PROJECT is your Google Cloud console project ID . If your project ID contains a colon ( : ), see Domain-scoped projects .
- PROJECT is your Google Cloud console project ID .
- REPOSITORY is the name of the repository where the image is stored.
- IMAGE is the image's name in the repository.
- TAG is the tag for the image version that you want to pull.
- IMAGE-DIGEST is the sha256 hash value of the image contents. Each version of an image has a unique image digest. In Google Cloud console, click the specific image to see its metadata. The digest is listed as the Image digest .
For example, consider an image with the following characteristics:
- Repository location: us-west1
- Repository name: my-repo
- Project ID: my-project
- Image name: test-image
- Tag: staging
This command to pull the image is:
```
 docker  
pull  
us-west1-docker.pkg.dev/my-project/my-repo/test-image:staging 
```

Docker downloads the specified image.

If you request an image from a remote repository, the remote repository downloads and caches the image from the upstream source if a cached copy doesn't exist.

If you request an image from a virtual repository, Artifact Registry searches upstream repositories for the requested image. If you request a version that is available in more than one upstream repository, Artifact Registry chooses an upstream repository to use based on the priority settings configured for the virtual repository.

For example, consider a virtual repository with the following priority settings for upstream repositories:

main-repo : Priority set to 100
secondary-repo1 : Priority set to 80 .
secondary-repo2 : Priority set to 80 .
test-repo : Priority set to 20 .

main-repo has the highest priority value, so the virtual repository always searches it first.

Both secondary-repo1 and secondary-repo2 have priority set to 80 . If a requested image is not available in main-repo , Artifact Registry searches these repositories next. Since they both have the same priority value, Artifact Registry can choose to serve an image from either repository if the version is available in both of them.

test-repo has is lowest priority value and will serve a stored artifact if none of the other upstream repositories has it.

Pulling images with `crictl`

crictl is a useful command-line tool for CRI runtime developers to debug their runtime without needing to set up Kubernetes components. If your Google Kubernetes Engine nodes use a containerd runtime, you can pull images from Artifact Registry using crictl .

Since crictl is primarily a troubleshooting tool, some docker commands such as pushing or tagging images are not available.

To pull an image from Artifact Registry:

In the Google Cloud console, go to the VM Instancespage.

Go to VM Instances
SSH into the node you are troubleshooting.

Obtain an access token for authentication with the repository.

curl -s "http://metadata.google.internal/computeMetadata/v1/instance/service-accounts/default/token" -H "Metadata-Flavor: Google"

Pull the image using crictl pull --creds and the access_token value

crictl pull --creds "oauth2accesstoken: ACCESS_TOKEN 
" LOCATION 
-docker.pkg.dev/ PROJECT-ID 
/ REPOSITORY 
/ IMAGE 
: TAG

crictl pull --creds "oauth2accesstoken: ACCESS_TOKEN 
" LOCATION 
-docker.pkg.dev/ PROJECT-ID 
/ REPOSITORY 
/ IMAGE 
@ IMAGE-DIGEST

The output looks like the following:

Image is up to date for sha256:0f25067aa9c180176967b4b50ed49eed096d43fa8c17be9a5fa9bff05933bee5

What's next

Learn about managing tags and deleting images .
If you want to run containers on Compute Engine, learn about containers on Compute Engine .
Use crictl to debug Kubernetes nodes
Learn to use crictl to pull images from private Artifact Registry repositories
Learn more about configuring crictl image registries

Push and pull images

Before you begin

Required roles

Authenticating to a repository

Using a credential helper

Using an access token

Linux

Windows

Using a service account key

Linux

Windows

Pushing an image

Tagging the local image

Push the tagged image to Artifact Registry

Pulling images with Docker

Pulling images with crictl

What's next

Pulling images with `crictl`