Objectives
This tutorial shows you how to complete the following tasks:
- Create a custom VPC network with two subnets in different regions.
- Create a virtual machine (VM) instance in each of the following regions: the US and Singapore.
- Create a Cloud Router and a Cloud NAT gateway, to allow the US VM to access the public internet.
- Create a global network firewall policy and add a firewall rule to enable Identity-Aware Proxy (IAP).
- Install Apache server on the Singapore VM.
- Add a firewall rule to block traffic to specific geolocations.
- Test the geolocation firewall rule.
The following diagram shows traffic between VMs in the us-central1
and asia-southeast1
regions within a custom VPC network.
A global network firewall policy blocks egress traffic to a specific
geolocation. The VM in the us-central1
region uses Cloud Router and a
Cloud NAT for internet access, without using an external IP address.
The VM in the us-central1
region uses the external IP address of the VM
in the asia-southeast1
region to test the firewall rule.
Before you begin
- Sign in to your Google Cloud account. If you're new to Google Cloud, create an account to evaluate how our products perform in real-world scenarios. New customers also get $300 in free credits to run, test, and deploy workloads.
-
In the Google Cloud console, on the project selector page, select or create a Google Cloud project.
-
Make sure that billing is enabled for your Google Cloud project .
-
In the Google Cloud console, on the project selector page, select or create a Google Cloud project.
-
Make sure that billing is enabled for your Google Cloud project .
- Make sure that you have the Compute Network Admin role
(
roles/compute.networkAdmin
). -
Enable the Compute Engine and Identity-Aware Proxy (IAP) APIs.
- If you prefer to work from the command line, install the Google Cloud CLI. For the conceptual and installation information about the tool,
see gcloud CLI overview
.
Note: If you haven't run the Google Cloud CLI previously, initialize your gcloud CLI directory by running the
gcloud init
command .
Create a custom VPC network with subnets
Create a custom mode VPC network with two IPv4 subnets.
Console
-
In the Google Cloud console, go to the VPC networkspage.
-
Click Create VPC network.
-
For Name, enter
vpc-geo-location
. -
For Subnet creation mode, select Custom.
-
In the New subnetsection, specify the following configuration parameters for a subnet:
- Name:
subnet-1-us
- Region:
us-central1
- IPv4 range:
10.0.0.0/24
- Name:
-
Click Done.
-
Click Add subnetand specify the following configuration parameters:
- Name:
subnet-2-sg
- Region:
asia-southeast1
- IPv4 range:
192.168.200.0/24
- Name:
-
Click Done.
-
Click Create.
gcloud
- To open the terminal, click Activate Cloud Shell.
-
To create a VPC network, run the following command:
gcloud compute networks create vpc-geo-location \ --subnet-mode=custom
-
In the Authorize cloud shelldialog, click Authorize.
-
To create a subnet, run the following command:
gcloud compute networks subnets create subnet-1-us \ --network=vpc-geo-location \ --region=us-central1 \ --range=10.0.0.0/24
-
To create another subnet, run the following command:
gcloud compute networks subnets create subnet-2-sg \ --network=vpc-geo-location \ --region=asia-southeast1 \ --range=192.168.200.0/24
Create VMs
In this section, you create two VMs in the subnets you configured in the preceding section.
Create a VM in the us-central1
region
Create a VM in the us-central1
region without an external IP address.
Console
To create a VM in the us-central1
region, follow these steps:
-
In the Google Cloud console, go to the Create an instancepage.
-
For Name, enter
instance-1-us
. -
For Region, select
us-central1 (Iowa)
. -
Expand Advanced optionsand then expand Networking.
-
In the Network interfacessection, expand defaultand specify the following configuration parameters:
- Network:
vpc-geo-location
- Subnetwork:
subnet-1-us IPv4 (10.0.0.0/24)
- External IPv4 address: None
- Network:
-
Click Done.
-
Click Create.
gcloud
To create a VM in the us-central1
region, run the following command:
gcloud compute instances create instance-1-us \ --network=vpc-geo-location \ --zone=us-central1-a \ --stack-type=IPV4_ONLY \ --no-address \ --subnet=subnet-1-us
Create a VM in the asia-southeast1
region
Console
To create a VM in the asia-southeast1
region, follow these steps:
-
In the Google Cloud console, go to the Create an instancepage.
-
For Name, enter
instance-2-sg
. -
For Region, select
asia-southeast1 (Singapore)
. -
Expand the Advanced optionsand then expand Networking.
-
In the Network interfacessection, expand defaultand specify the following configuration parameters:
- Network:
vpc-geo-location
- Subnetwork:
subnet-2-sg IPv4 (192.168.200.0/24)
- Network:
-
Click Done.
-
Click Create.
gcloud
To create a VM in the asia-southeast1
region, run the following command:
gcloud compute instances create instance-2-sg \ --network=vpc-geo-location \ --zone=asia-southeast1-b \ --subnet=subnet-2-sg \ --stack-type=IPV4_ONLY
Create a Cloud Router and a Cloud NAT gateway
In the previous section, you created two VMs, instance-1-us
and asia-southeast1
. To allow instance-1-us
VMs to
access the public internet, create a Cloud Router and a
Cloud NAT gateway.
Console
-
In the Google Cloud console, go to the Cloud NATpage.
-
Click Get startedor Create Cloud NAT gateway.
-
For Gateway name, enter
nat-gateway
. -
For NAT type, select Public.
-
In the Select Cloud Routersection, specify the following configuration parameters:
- Network:
vpc-geo-location
- Region:
us-central1
- Cloud Router: Create new router.
- For Name, enter
router-fw-rules
. - Click Create.
- For Name, enter
- Network:
-
Click Create.
-
In the Google Cloud console, go to the IP addressespage.
-
Click the External IP Addressestab, and then copy the IP address of your Cloud NAT (
nat-auto-ip
). This IP address is used when you validate the connection between theinstance-1-us
VM andinstance-2-sg
VM.
gcloud
-
To create a Cloud Router, run the following command:
gcloud compute routers create router-fw-rules \ --network=vpc-geo-location \ --region=us-central1
-
To create a Cloud NAT gateway, run the following command:
gcloud compute routers nats create nat-gateway \ --router=router-fw-rules \ --region=us-central1 \ --auto-allocate-nat-external-ips \ --nat-all-subnet-ip-ranges
-
To view the Cloud NAT IP address, run the following command:
gcloud compute routers get-nat-ip-info \ router-fw-rules \ --region=us-central1
Remember to copy the IP address of your Cloud NAT (
natIp
). This IP address is used when you validate the connection between theinstance-1-us
VM and theinstance-2-sg
VM.
Create a global network firewall policy to enable IAP
In this section, you create a global network firewall policy and add a firewall rule to enable IAP. IAP allows administrative access to the VM instances.
The firewall rule includes the following characteristics.
- Ingress traffic from IP range
35.235.240.0/20
. This range contains all IP addresses that IAP uses for TCP forwarding. -
A connection to all ports that you want to be accessible by using IAP TCP forwarding, for example, port
22
for SSH.
Console
To allow IAP access to all VM instances in the vpc-geo-location
network, follow these steps:
-
In the Google Cloud console, go to the Firewall policiespage.
-
Click Create firewall policy.
-
In the Configure policysection, for Policy name, enter
fw-policy
. -
For Deployment scope, select Globaland click Continue.
-
To create rules for your policy, in the Add rulessection, click Add rule.
- For Priority, enter
100
. - For Direction of traffic, select Ingress.
- For Action on match, select Allow.
- For Logs, select On.
- In the Targetsection, for Target type, select All instances in the network.
- In the Sourcesection, for IP ranges, enter
35.235.240.0/20
. - In the Protocol and portssection, select Specified protocols and ports.
- Select the TCPcheckbox, and for Ports, enter
22
. - Click Create.
- For Priority, enter
-
Click Continue.
-
To associate a VPC network with the policy, in the Associate policy with VPC networkssection, click Associate.
-
Select the checkbox of
vpc-geo-location
and click Associate. -
Click Continue.
-
Click Create.
gcloud
To allow IAP access to all VM instances in the vpc-geo-location
network, run the following command:
-
To create a firewall policy, run the following command:
gcloud compute network-firewall-policies create fw-policy \ --global
-
To create a firewall rule that allows traffic to all destinations and enables logs, run the following command:
gcloud compute network-firewall-policies rules create 100 \ --firewall-policy=fw-policy \ --direction=INGRESS \ --action=ALLOW \ --layer4-configs=tcp:22 \ --src-ip-ranges=35.235.240.0/20 \ --global-firewall-policy \ --enable-logging
-
To associate the firewall policy with the VPC network, run the following command:
gcloud compute network-firewall-policies associations create \ --firewall-policy=fw-policy \ --network=vpc-geo-location \ --name=pol-association-fw-rules \ --global-firewall-policy
Create a firewall rule
In this section, you create a firewall rule to allow ingress connection on
the instance-2-sg
VM.
Console
-
In the Google Cloud console, go to the Firewall policiespage.
-
In the Network firewall policiessection, click
fw-policy
. -
Click Create rule.
-
For Priority, enter
500
. -
For Direction of traffic, select Ingress.
-
For Action on match, select Allow.
-
For Logs, select On.
-
In the Targetsection, for Target type, select All instances in the network.
-
In the Sourcesection, for IP ranges, enter NAT_IP_ADDRESS .
Replace
NAT_IP_ADDRESS
with the IP address assigned to your Cloud NAT. For more information, see Create a Cloud Router and a Cloud NAT gateway . -
Click Create.
gcloud
To update the firewall policy, run the following command:
gcloud compute network-firewall-policies rules create 500 \ --firewall-policy=fw-policy \ --direction=INGRESS \ --action=ALLOW \ --src-ip-ranges= NAT_IP_ADDRESS \ --layer4-configs=all \ --global-firewall-policy \ --enable-logging
Replace NAT_IP_ADDRESS
with the IP address
assigned to your Cloud NAT. For more information, see Create a Cloud Router and a Cloud NAT gateway
.
Install the Apache server
In this section, you install the Apache server on the instance-2-sg
VM.
Console
-
In the Google Cloud console, go to the VM instancespage.
-
In the Connectcolumn of the
instance-2-sg
VM, click SSH. -
In the SSH-in-browserdialog, click Authorizeand wait for the connection to establish.
-
To update the package lists on your instance, run the following command:
sudo apt-get update
When the process is finished, it generates the following message:
Reading package lists... Done.
-
To install the
apache2 HTTP Server
package, at the command prompt, run the following command:sudo apt-get install apache2 php7.0
While the process is in progress, it generates the following message:
After this operation, 56.0 MB of additional disk space will be used. Do you want to continue? [Y/n]
Press Y to confirm, and then press Enter .
-
To overwrite the Apache web server default web page, run the following command:
echo '<!doctype html><html><body><h1>Hello World!</h1></body></html>' | sudo tee /var/www/html/index.html
-
Close the SSH-in-browserdialog.
gcloud
-
To use SSH to connect to the
instance-2-sg
VM, run the following command:gcloud compute ssh instance-2-sg \ --zone=asia-southeast1-b \ --tunnel-through-iap
When prompted, press Y to confirm, and then press Enter .
-
To update the package lists on your instance, run the following command:
sudo apt-get update
When the process is finished, it generates the following message:
Reading package lists... Done.
-
To install the
apache2 HTTP Server
package, at the command prompt, run the following command:sudo apt-get install apache2 php7.0
While the process is in progress, it generates the following message:
After this operation, 56.0 MB of additional disk space will be used. Do you want to continue? [Y/n]
Press Y to confirm, and then press Enter .
-
To overwrite the Apache web server default web page, run the following command:
echo '<!doctype html><html><body><h1>Hello World!</h1></body></html>' | sudo tee /var/www/html/index.html
-
To close the SSH-in-browser, enter
exit
.
Validate the connection
After installing the Apache server on the instance-2-sg
VM, connect to
the instance-1-us
VM from the instance-2-sg
VM using the
external IP address of the instance-2-sg
VM.
Console
-
In the Google Cloud console, go to the VM instancespage.
-
From the External IPcolumn of the
instance-2-sg
VM, copy the external IP address of the VM. -
In the Connectcolumn of the
instance-1-us
VM, click SSH. -
In the SSH-in-browserdialog, click Authorizeand wait for the connection to establish.
-
To verify the connection, run the following command:
curl EXTERNAL_IP -m 2
Replace
EXTERNAL_IP
with the IP address of theinstance-2-sg
VM.The expected response message is as follows:
<!doctype html><html><body><h1>Hello World!</h1></body></html>
-
Close the SSH-in-browserdialog.
gcloud
-
To view the external IP address of the
instance-2-sg
VM, run the following command:gcloud compute instances describe instance-2-sg \ --zone=asia-southeast1-b \ --format='get(networkInterfaces[0].accessConfigs[0].natIP)'
When prompted, press Y to confirm, and then press Enter . Make sure to note the external IP address of the
instance-2-sg
VM. -
To use SSH to connect to the
instance-1-us
VM, run the following command:gcloud compute ssh instance-1-us \ --zone=us-central1-a \ --tunnel-through-iap
-
To verify the connection, run the following command:
curl EXTERNAL_IP -m 2
Replace
EXTERNAL_IP
with the IP address of theinstance-2-sg
VM.The expected response message is as follows:
<!doctype html><html><body><h1>Hello World!</h1></body></html>
-
To close the SSH-in-browser, enter
exit
.
Add a firewall rule to block traffic to specific geolocations
In this section you add a firewall rule for the VPC vpc-geo-location
to block egress traffic to Italy, Poland, and Singapore.
Console
To add a new rule in the fw-policy
that you created in the Create a global network firewall policy
section, follow these steps:
-
In the Google Cloud console, go to the Firewall policiespage.
-
In the Network firewall policiessection, click
fw-policy
. -
Click Create rule.
-
For Priority, enter
200
. -
For Direction of traffic, select Egress.
-
For Action on match, select Deny.
-
For Logs, select On.
-
In the Destinationsection, for Geolocations, select Singapore (SG), Poland (PL), and Italy (IT).
-
Click OK.
-
Click Create.
gcloud
To add a new rule in the fw-policy
that you created in the Create a global network firewall policy
section, run the following command:
gcloud compute network-firewall-policies rules create 200 \ --firewall-policy=fw-policy \ --direction=EGRESS \ --action=DENY \ --dest-region-codes=SG,PL,IT \ --layer4-configs=all \ --global-firewall-policy \ --enable-logging
Test the geolocation firewall rule
Console
After you have added the rule to block egress traffic to Singapore (SG), Poland (PL), and Italy (IT), follow these steps to test the rule:
-
In the Google Cloud console, go to the VM instancespage.
-
From the External IPcolumn of the
instance-2-sg
VM, copy the external IP address of the VM. -
In the Connectcolumn of the
instance-1-us
VM, click SSH. -
In the SSH-in-browserdialog, click Authorizeand wait for the connection to establish.
-
To verify that egress traffic to the
instance-2-sg
VM is blocked, run the following command:curl EXTERNAL_IP -m 2
Replace
EXTERNAL_IP
with the IP address of theinstance-2-sg
VM.The
Connection timed out
message is expected because you created a firewall rule to deny external traffic from the US VM to the Singapore VM. -
To verify that the egress traffic to Poland is blocked, run the following command:
curl `https://www.gov.pl` -m 2
The
Connection timed out
message is expected because you created a firewall rule to deny external traffic to the Poland website. -
To verify that the egress traffic to Italy is blocked, run the following command:
curl `https://www.esteri.it/it/` -m 2
The
Connection timed out
message is expected because you created a firewall rule to deny external traffic to the Italy website. -
Close the SSH-in-browserdialog.
gcloud
After you have added the rule to block egress traffic to Singapore (SG), Poland (PL), and Italy (IT), run the following command to test the rule:
-
To view the external IP address of the
instance-2-sg
VM, run the following command:gcloud compute instances describe instance-2-sg \ --format='get(networkInterfaces[0].accessConfigs[0].natIP)'
When prompted, press Y to confirm, and then press Enter . Make sure to note the external IP address of the
instance-2-sg
VM. -
To use SSH to connect to the
instance-1-us
VM, run the following command:gcloud compute ssh instance-1-us \ --zone=us-central1-a \ --tunnel-through-iap
-
To verify that the egress traffic to Singapore is blocked, run the following command:
curl EXTERNAL_IP -m 2
Replace
EXTERNAL_IP
with the IP address of theinstance-2-sg
VM.The
Connection timed out
message is expected because you created a firewall rule to deny external traffic from the US VM to the Singapore VM. -
To verify that the egress traffic to Poland is blocked, run the following command:
curl https://www.gov.pl -m 2
The
Connection timed out
message is expected because you created a firewall rule to deny external traffic from the Poland website. -
To verify that the egress traffic to Italy is blocked, run the following command:
curl https://www.esteri.it/it/ -m 2
The
Connection timed out
message is expected because you created a firewall rule to deny external traffic to the Italy website. -
To close the SSH-in-browserdialog, enter
exit
.
View the logs
You can verify that the firewall rules were applied to the egress traffic by accessing the logs. To view the log details, follow these steps:
-
In the Google Cloud console, go to the Firewall policiespage.
-
In the Network firewall policiessection, click the
fw-policy
name. -
Click Column display options.
-
In the Displayed columnsdialog, select Hit countand then click OK.
-
In the Hit countcolumn, select the number for the rule you created during Create a global network firewall policy . The Logs Explorerpage opens.
-
To view the firewall rule applied to the egress traffic, expand the individual log. You can view the connection, disposition, and remote location details.
Clean up
To avoid incurring charges to your Google Cloud account for the resources used in this tutorial, either delete the project that contains the resources, or keep the project and delete the individual resources.
In this section, you delete the resources created in this tutorial.
Delete the firewall policy
Console
-
In the Google Cloud console, go to the Firewall policiespage.
-
In the Network firewall policiessection, click the
fw-policy
name. -
Click the Associationstab.
-
Select the checkbox of
vpc-geo-location
and click Remove association. -
In the Remove a firewall policy associationdialog, click Remove.
-
Next to the
fw-policy
title, click Delete. -
In the Delete a firewall policydialog, click Delete.
gcloud
-
Remove the association between the firewall policy and VPC network.
gcloud compute network-firewall-policies associations delete \ --name=pol-association-fw-rules \ --firewall-policy=fw-policy \ --global-firewall-policy
-
Delete the firewall policy.
gcloud compute network-firewall-policies delete fw-policy \ --global
When prompted, press Y to confirm, and then press Enter .
Delete the VMs
Console
-
In the Google Cloud console, go to the VM instancespage.
-
Select the checkboxes of
instance-1-us
andinstance-2-sg
VMs. -
Click Delete.
-
In the Delete 2 instances?dialog, click Delete.
gcloud
-
To delete the
instance-1-us
VM, run the following command:gcloud compute instances delete instance-1-us \ --zone=us-central1-a
When prompted, press Y to confirm, and then press Enter .
-
To delete the
instance-2-sg
VM, run the following command:gcloud compute instances delete instance-2-sg \ --zone=asia-southeast1-b
When prompted, press Y to confirm, and then press Enter .
Delete the Cloud NAT gateway and Cloud Router
Console
-
In the Google Cloud console, go to the Cloud routerspage.
-
Select the
router-fw-rules
checkbox. -
Click Delete.
-
In the Delete router-fw-rulesdialog, click Delete.
When you delete a Cloud Router, the associated Cloud NAT gateway is also deleted.
gcloud
To delete the router-fw-rules
Cloud Router, run the following
command:
gcloud compute routers delete router-fw-rules \ --region=us-central1
When prompted, press Y to confirm, and then press Enter .
When you delete a Cloud Router, the associated Cloud NAT gateway is also deleted.
Delete the VPC network and its subnets
Console
-
In the Google Cloud console, go to the VPC networkspage.
-
In the Namecolumn, click
vpc-geo-location
. -
Click Delete VPC network.
-
In the Delete a networkdialog, click Delete.
When you delete a VPC, its subnets are also deleted.
gcloud
-
To delete the subnet
subnet-1-us
of thevpc-geo-location
VPC network, run the following command:gcloud compute networks subnets delete subnet-1-us \ --region=us-central1
When prompted, press Y to confirm, and then press Enter .
-
To delete the subnet
subnet-2-sg
of thevpc-geo-location
VPC network, run the following command:gcloud compute networks subnets delete subnet-2-sg \ --region=asia-southeast1
When prompted, press Y to confirm and press Enter .
-
To delete the
vpc-geo-location
VPC network, run the following command:gcloud compute networks delete vpc-geo-location
When prompted, press Y to confirm, and then press Enter .
What's next
- For conceptual information about firewall policies, see Firewall policies .
- For conceptual information about firewall policy rules, see Firewall policy rules .
- To create, update, monitor, and delete VPC firewall rules, see Use VPC firewall rules .
- To determine costs, see Cloud NGFW pricing .