SPEC SHEET
LCC2-14 and LCD2-14 Clean Process Cabinet Oven
Despatch's LCC/LCD2-14 Clean Process Cabinet Ovens are designed to meet the demands of production and
large scale R&D environments. A variety of tailored options are available to meet your specific needs. Typical
applications for these ovens include die-bond curing and other semiconductor packaging processes, depyrogenation,
sterilizing and drying for life sciences. The ovens are configured for 50/60 Hz and available in all voltages used
around the world.
Where minimal contamination is essential, the LCC/LCD2-14 Series Cabinet Ovens offer the highest standards
in HEPA filtration. Re-circulated airflow is 100% HEPA filtered for operation at ISO Class 5 (Class 100) or better
within the oven chamber. Also available in a non-HEPA filter option.
It is available in two different atmosphere configurations:
Inert Atmosphere
Allows nitrogen (or other inert gas) to be injected into the chamber to lower the oxygen
level to prevent oxidation of products. A water cooling coil is provided for rapid cooling. Control of nitrogen flow
and water cooling is programmable through the Protocol 3 controller. Class A Atmosphere
Meets NFPA requirements for processing flammable solvents, including a pressure
relief panel (rear of oven), purge timer, and forced exhaust. Air Atmosphere
A forced exhaust fan is included on the air atmosphere unit for rapid cooling.
Advanced control| Protocol 3 is a microprocessor-based temperature and
hi-limit controller with large LCD display and real time clock for auto start
capability. The LCD display shows temperature readings along with clear,
detailed information on oven status. Protocol 3 features three operating
modes for quick and easy operation: Manual mode, Timer mode and Pro.file
mode. The data-logging functionality enables reporting and analyzing and data files can be exported via the controller's USB port. Modbus RS485 communications are included for easy data access.
Remote operation, programming and data logging| The Despatch Protocol Manager network utility software enables the operation of up to 32 Protocol 3 and/or Protocol Plus controllers from a single, remote PC using RS485 communication.
More information on Protocol Manager Software
Standard Features:
- LCD: 350°C (662°F)
maximum temperature
- LCC: 260°C (500°F)
maximum temperature
- Lockable Disconnect Switch on
the control panel for easy servicing
- Protocol 3 control with large
LCD display, integrated data
logging capabilities and USB
port for simple oven set-up and
data export
- Stainless steel interior with
all interior seams continuously
welded on the insulation side to
protect the work chamber from
contamination
- Programmable door lock
prevents operators from
opening oven door when cycle
is in process
- Available with HEPA filtration
- Recirculated airflow is 100%
HEPA (High Efficiency Particulate
Air) filtered for operation at ISO
Class 5 (Class 100) throughout
the cycle.
- Magnehelic gauge monitors
the HEPA filter pressure drop so
you know when it is time to
replace the filter
- UL & C-UL Listed open
control panel
- Modbus communications connection
(RS485) for remote monitoring and
recording
- End of cycle and high limit audible
and visual alarm, that can be seen
and heard from a distance.
Options:
- Silicone-free construction
- Door interlock switch turns off heater and fan when
door is opened
- Cleaning and triple bagging in clean room prior
to shipment
- Oxygen concentration monitor system
- Chart recorders
- Three color process stack light
- Pass-through doors (Air atmosphere only)
- Extra shelves
- Data acquisition software
- Non-HEPA filter option
- Customization available
- CE compliance
