In GoogleSQL for BigQuery, a WITH
clause contains one or more common table
expressions (CTEs) with temporary tables that you can reference in a query
expression. CTEs can be non-recursive
, recursive
, or both. The RECURSIVE
keyword enables recursion in the WITH
clause ( WITH RECURSIVE
).
A recursive CTE can reference itself, a preceding CTE, or a subsequent CTE. A non-recursive CTE can reference only preceding CTEs and can't reference itself. Recursive CTEs run continuously until no new results are found, while non-recursive CTEs run once. For these reasons, recursive CTEs are commonly used for querying hierarchical data and graph data.
For example, consider a graph where each row represents a node that can link to
other nodes. To find the transitive closure of all reachable nodes from a
particular start node without knowing the maximum number of hops, you would need
a recursive CTE in the query ( WITH RECURSIVE
). The recursive query would start
with the base case of the start node, and each step would compute the new unseen
nodes that can be reached from all the nodes seen so far up to the previous
step. The query concludes when no new nodes can be found.
However, recursive CTEs can be computationally expensive, so before you use
them, review this guide and the WITH
clause
section of the
GoogleSQL reference documentation.
Create a recursive CTE
To create a recursive CTE in GoogleSQL, use the WITH RECURSIVE
clause
as shown in the following example:
WITH
RECURSIVE
CTE_1
AS
(
(
SELECT
1
AS
iteration
UNION
ALL
SELECT
1
AS
iteration
)
UNION
ALL
SELECT
iteration
+
1
AS
iteration
FROM
CTE_1
WHERE
iteration
<
3
)
SELECT
iteration
FROM
CTE_1
ORDER
BY
1
ASC
The preceding example produces the following results:
/*-----------*
| iteration |
+-----------+
| 1 |
| 1 |
| 2 |
| 2 |
| 3 |
| 3 |
*-----------*/
A recursive CTE includes a base term, a union operator, and a recursive term. The base term runs the first iteration of the recursive union operation. The recursive term runs the remaining iterations and must include one self-reference to the recursive CTE. Only the recursive term can include a self-reference.
In the preceding example, the recursive CTE contains the following components:
- Recursive CTE name:
CTE_1 - Base term:
SELECT 1 AS iteration - Union operator:
UNION ALL - Recursive term:
SELECT iteration + 1 AS iteration FROM CTE_1 WHERE iteration < 3
To learn more about the recursive CTE syntax, rules, and examples, see WITH
clause
in the GoogleSQL reference documentation.
Explore reachability in a directed acyclic graph (DAG)
You can use a recursive query to explore reachability in a
directed acyclic graph (DAG). The following query finds all nodes that can be
reached from node 5
in a graph called GraphData
:
WITH
RECURSIVE
GraphData
AS
(
-- 1 5
-- / \ / \
-- 2 - 3 6 7
-- | \ /
-- 4 8
SELECT
1
AS
from_node
,
2
AS
to_node
UNION
ALL
SELECT
1
,
3
UNION
ALL
SELECT
2
,
3
UNION
ALL
SELECT
3
,
4
UNION
ALL
SELECT
5
,
6
UNION
ALL
SELECT
5
,
7
UNION
ALL
SELECT
6
,
8
UNION
ALL
SELECT
7
,
8
),
R
AS
(
(
SELECT
5
AS
node
)
UNION
ALL
(
SELECT
GraphData
.
to_node
AS
node
FROM
R
INNER
JOIN
GraphData
ON
(
R
.
node
=
GraphData
.
from_node
)
)
)
SELECT
DISTINCT
node
FROM
R
ORDER
BY
node
;
The preceding example produces the following results:
/*------*
| node |
+------+
| 5 |
| 6 |
| 7 |
| 8 |
*------*/
Troubleshoot iteration limit errors
Recursive CTEs can result in infinite recursion, which occurs when the recursive term executes continuously without meeting a termination condition. To terminate infinite recursions, a limit of iterations for each recursive CTE is enforced. For BigQuery, the iteration limit is 500 iterations. Once a recursive CTE reaches the maximum number of iterations, the CTE execution is aborted with an error.
This limit exists because the computation of a recursive CTE can be expensive, and running a CTE with a large number of iterations consumes a lot of system resources and takes a much longer time to finish.
Queries that reach the iteration limit are usually missing a proper termination condition, thus creating an infinite loop, or using recursive CTEs in inappropriate scenarios.
If you experience a recursion iteration limit error, review the suggestions in this section.
Check for infinite recursion
To prevent infinite recursion, make sure the recursive term is able to produce an empty result after executing a certain number of iterations.
One way to check for infinite recursion is to convert your recursive CTE to a TEMP TABLE
with a REPEAT
loop for the first 100
iterations, as follows:
DECLARE current_iteration INT64 DEFAULT 0 ; CREATE TEMP TABLE recursive_cte_name AS SELECT base_expression , current_iteration AS iteration ; REPEAT SET current_iteration = current_iteration + 1 ; INSERT INTO recursive_cte_name SELECT recursive_expression , current_iteration FROM recursive_cte_name WHERE termination_condition_expression AND iteration = current_iteration - 1 AND current_iteration < 100 ; UNTIL NOT EXISTS ( SELECT * FROM recursive_cte_name WHERE iteration = current_iteration ) END REPEAT ;
Replace the following values:
-
recursive_cte_name: The recursive CTE to debug. -
base_expression: The base term of the recursive CTE. -
recursive_expression: The recursive term of the recursive CTE. -
termination_condition_expression: The termination expression of the recursive CTE.
For example, consider the following recursive CTE called TestCTE
:
WITH
RECURSIVE
TestCTE
AS
(
SELECT
1
AS
n
UNION
ALL
SELECT
n
+
3
FROM
TestCTE
WHERE
MOD
(
n
,
6
)
!=
0
)
This example uses the following values:
-
recursive_cte_name:TestCTE -
base_expression:SELECT 1 -
recursive_expression:n + 3 -
termination_condition_expression:MOD(n, 6) != 0
The following code would therefore test the TestCTE
for infinite recursion:
DECLARE current_iteration INT64 DEFAULT 0 ; CREATE TEMP TABLE TestCTE AS SELECT 1 AS n , current_iteration AS iteration ; REPEAT SET current_iteration = current_iteration + 1 ; INSERT INTO TestCTE SELECT n + 3 , current_iteration FROM TestCTE WHERE MOD ( n , 6 ) != 0 AND iteration = current_iteration - 1 AND current_iteration < 10 ; UNTIL NOT EXISTS ( SELECT * FROM TestCTE WHERE iteration = current_iteration ) END REPEAT ; -- Print the number of rows produced by each iteration SELECT iteration , COUNT ( 1 ) AS num_rows FROM TestCTE GROUP BY iteration ORDER BY iteration ; -- Examine the actual result produced for a specific iteration SELECT * FROM TestCTE WHERE iteration = 2 ;
The preceding example produces the following results that include the iteration ID and the number of rows that were produced during that iteration:
/*-----------+----------*
| iteration | num_rows |
+-----------+----------+
| 0 | 1 |
| 1 | 1 |
| 2 | 1 |
| 3 | 1 |
| 4 | 1 |
| 5 | 1 |
| 6 | 1 |
| 7 | 1 |
| 8 | 1 |
| 9 | 1 |
| 10 | 1 |
*-----------+----------*/
These are the actual results produced during iteration 2
:
/*----------+-----------*
| n | iteration |
+----------+-----------+
| 7 | 2 |
*----------+-----------*/
If the number of rows is always greater than zero, which is true in this example, then the sample likely has an infinite recursion.
Verify the appropriate usage of the recursive CTE
Verify that you're using the recursive CTE in an appropriate scenario.
Recursive CTEs can be expensive to compute because they're designed to query
hierarchical data and graph data. If you aren't querying these two kinds of
data, consider alternatives, such as using the LOOP
statement
with a non-recursive CTE.
Split a recursive CTE into multiple recursive CTEs
If you think your recursive CTE needs more than the maximum allowed iterations, you might be able to break down your recursive CTE into multiple recursive CTEs.
You can split a recursive CTE with a query structure similar to the following:
WITH RECURSIVE CTE_1 AS ( SELECT base_expression UNION ALL SELECT recursive_expression FROM CTE_1 WHERE iteration < 500 ), CTE_2 AS ( SELECT * FROM CTE_1 WHERE iteration = 500 UNION ALL SELECT recursive_expression FROM CTE_2 WHERE iteration < 500 * 2 ), CTE_3 AS ( SELECT * FROM CTE_2 WHERE iteration = 500 * 2 UNION ALL SELECT recursive_expression FROM CTE_3 WHERE iteration < 500 * 3 ), [, ...] SELECT * FROM CTE_1 UNION ALL SELECT * FROM CTE_2 WHERE iteration > 500 UNION ALL SELECT * FROM CTE_3 WHERE iteration > 500 * 2 [...]
Replace the following values:
-
base_expression: The base term expression for the current CTE. -
recursive_expression: The recursive term expression for the current CTE.
For example, the following code splits a CTE into three distinct CTEs:
WITH
RECURSIVE
CTE_1
AS
(
SELECT
1
AS
iteration
UNION
ALL
SELECT
iteration
+
1
AS
iteration
FROM
CTE_1
WHERE
iteration
<
10
),
CTE_2
AS
(
SELECT
*
FROM
CTE_1
WHERE
iteration
=
10
UNION
ALL
SELECT
iteration
+
1
AS
iteration
FROM
CTE_2
WHERE
iteration
<
10
*
2
),
CTE_3
AS
(
SELECT
*
FROM
CTE_2
WHERE
iteration
=
10
*
2
UNION
ALL
SELECT
iteration
+
1
AS
iteration
FROM
CTE_3
WHERE
iteration
<
10
*
3
)
SELECT
iteration
FROM
CTE_1
UNION
ALL
SELECT
iteration
FROM
CTE_2
WHERE
iteration
>
10
UNION
ALL
SELECT
iteration
FROM
CTE_3
WHERE
iteration
>
20
ORDER
BY
1
ASC
In the preceding example, 500 iterations is replaced with 10 iterations so that it's faster to see the results of the query. The query produces 30 rows, but each recursive CTE only iterates 10 times. The output looks like the following:
/*-----------*
| iteration |
+-----------+
| 2 |
| ... |
| 30 |
*-----------*/
You could test the previous query on much larger iterations.
Use a loop instead of a recursive CTE
To avoid iteration limits, consider using a loop instead of a recursive CTE.
You can create a loop with one of several loop statements,
such as LOOP
, REPEAT
, or WHILE
. For more information, see Loops
.
Change the recursive limit
If you think the following factors apply, contact Customer Care to raise the recursive limit:
- You have a valid reason for your recursive CTE to run more than 500 iterations.
- You're OK with a much longer execution.
Keep in mind that raising the recursive limit has potential risks:
- Your CTE might fail with a different error message, such as memory exceeded or timeout.
- If your project is using the on-demand pricing model, your CTE might still fail with a billing tier error until you switch to the capacity-based pricing model.
- A recursive CTE with a large number of iterations consumes a lot of resources. This might impact other queries that are running within the same reservation, since they compete for shared resources.
Pricing
If you use on-demand billing , BigQuery charges based on the number of bytes that are processed during execution of a query with a recursive CTE.
For more information, see Query size calculation .
Quotas
For information about recursive CTE quotas and limits, see Quotas and limits .
