全1040件 (1040件中 51-100件目)
Sound Blaster Play3は、パソコンでのリモート会議やスマホ・タブレットとの通話に最強のアイテムかもしれません。リーズナブルな価格で、接続できる機器が多く、有線接続で安定・安心です。最近、ガラケー(ドコモのFOMA)がSIMを認識していないことがあるようになりました。バッテリーも劣化してきています。SIMの認識不良が起きるようになったので、さすがにガラケーを使い続けるのは難しくなってきました。仕方なく、ガラケーをスマホに切り替えることにしましたが、家族間の無料通話ができなくなるので、アプリでの通話を利用することにしました。とりあえず、マイクロソフトのTeamsを使っていこうと思います。Teamsは、通話だけでなく、チャットや画面共有会議など、便利に使えます。家族とのコミュニーションが仕事モードっぽくなるのは気になりますが。Teamsでの通話であれば、スマホよりもパソコンのほうが使いやすいですが、私のノートパソコンの内蔵マイクでは音質が劣悪なようで、家族から「聞こえない」「雑音がすごい」と不評です。パソコンの4極端子にイヤホンマイクをつないだ場合も不評です。仕事用のパソコンではUSB接続ヘッドセットやUSBオーディオインターフェースとミキサーにつないだダイナミックマイクを利用しているのですが、プライベート用パソコンにも専用のヘッドセットを用意することにしました。USB接続ヘッドセットをもう1つ用意するのではつまらないので、低コストでパフォーマンスの高いものを探してみました。そこで、見つけたのがSound Blaster Play3です!。Sound Blaster Play3は。小型のUSBオーディオインターフェースです。3.5mmのマイク端子とヘッドホン端子があり、ヘッドホン端子の方は、3極ヘッドホンと4極ヘッドセットの両方に対応しているので、接続できる機器の幅が広いという特長があります。ダイソーの税込み330円の4極イヤホンマイクも利用できます。3.5mm端子のマイクとイヤホンという組み合わせも可能です。ヘッドホンやヘッドセットは消耗品でもあるので、Sound Blaster Play3が長持ちすれば、USBインターフェース一体型のヘッドセットよりもよいかもしれません。Sound Blaster Play3への物理的負荷を減らすためにUSB延長ケーブル経由でパソコンに接続しています。ヘッドホン端子とマイク端子が別のタイプの有線ヘッドセットを複数、エレコムわけありショップで安く入手できたこともSound Blaster Play3を選んだ理由の一つです。エレコム ヘッドセットマイクロフォン/両耳オーバーヘッド/1.8m:HS-HP22SV【税込3300円以上で送料無料】[訳あり][ELECOM:エレコムわけありショップ][直営]価格:382円(税別、送料別)(2023/1/2時点)楽天で購入会話用にチューニングされているためか、ドラマのセリフがとても聞きやすいです。入手したエレコムのヘッドセットは、イヤーパッドはチープな感じですが、ケーブルは編み込みのタイプでなかなかいい感じです。また、Sound Blaster Play3は、ハイレゾ再生対応なので、ハイレゾ対応ヘッドホンをつないで使えるという遊びの要素もあります。再生音の設定ができる専用のアプリも利用できます。USB接続なので、マイクの音声も「ノートパソコンの内蔵マイクと比べて、非常にクリアになった」と好評です。内蔵マイクや4極イヤホンマイクを直接接続した場合に生じる「語尾が不明瞭になる現象」もありません。ヘッドセットを使用した通話では、スマホを手に持つ必要もなく、非常に快適です。Sound Blaster Play3のUSBはタイプAですが、USB変換アダプターでスマホでも使えるようにしようと思います。クリエイティブメディア|CREATIVE USB オーディオインターフェイス Sound Blaster Play! 3 SB-PLAY3価格:1853円(税別、送料別)(2022/12/24時点)楽天で購入330あんせ
2022.12.24
コメント(0)
「W杯」というキーワードを含むツイートを分析してみました。ドイツ、スペインと言う単語は多く使用されていますが、コスタリカという単語は上位にはありません。なぜ、日本はコスタリカ戦で点を取れなかったのか。コスタリカ戦には、決勝トーナメントで勝つためのヒントがあるように思うのですが・・・。守備が上手いチームから点を取るのが難しいということなのでしょうか。ところで、“三笘の1ミリ”には驚きました。サッカーのプレイフィールドの概念はラインで仕切られた「空間」であることを知りました。野球の場合は、フィールド外(ファウルグラウンド)の飛球を捕ればアウトになり、プレーは有効です、サッカーの場合はフィールド外にボールが出てしまうとプレーは無効になるということのようです。例えば、選手がフィールド内にいてフィールドの外に出た空中のボールを蹴ってフィールド内に戻しても無効になるということなのでしょう。逆にフィールド内にボールがあればプレーは有効で、フィールド内とフィールド外を分けるのはライン上に垂直に立てた立体的なラインということのようです。ボールの接地面がラインの外であるかどうかは関係ないということを初めて知りました。野球やテニスの「オンザライン」とは異なる考え方です。下図は、「三笘の1ミリ」の単語を含むツイートについて共起分析をしたものですが、ツイートの内容がそのままわかるようになっています。「あと 1ミリ ところ 三 笘 さん 折り返し 田中 ゴール」という単語の並びから文章がそのまま読み取れます。「三笘さん」というのは、ABEMAの解説者の本田氏の呼び方の影響でしょうか。「三笘の1ミリ」がなければ、引き分けになっていたかもしれません。引き分けではスペインとドイツが決勝リーグ進出という結果になっています。どうやら、「三笘の1ミリ」が首位通過と予選敗退の運命を分けた、という見方ができるようです。
2022.12.03
コメント(0)
W杯サッカー絶賛開催中のカタールでは、新型コロナの感染確認者数は減少傾向にあるようです。満員のスタジアムで、観客がノーマスクで大声援を送っている映像をよく見ますが、カタールでの感染確認者数が増えているというデータは見られません。ゼロコロナ政策の中国では、W杯の観客席のシーンを放送しなくなっているという話も聞かれます。カタールの11月の感染確認者数は、10月、9月、8月よりも低い水準で推移しています。新型コロナ終息を世界に印象付けるようなことになっています。
2022.11.29
コメント(0)
昨年、無観客で開催された東京五輪。カタールでのワールドカップは、大観客、大声援のもとで開催されています。わずか1年の違いですが、状況はとても大きく変わったようです。「新型コロナ終息」を印象づけるイベントになっているようです。カタールの感染確認状況は、落ち着いているようです。
2022.11.25
コメント(0)
昨日、塩野義製薬のコロナ薬「ゾコーバ」が緊急承認されました。7月の審査では、承認を見送られていましたが、今回は評価内容を変えて承認に至ったようです。前回の審査では、コロナの12症状について、投与群とコントロール群を比較していたそうですが、今回はあまり症状が見られなくなった症状を除いて5症状に絞って比較したそうです。つまり、7月の審査では、そもそもあまり見られなくなっていた症状について、投与群とコントロール群を比較していたので有効性が推定できなかったというのです。症状が見られないのに薬の効果が示されるわけはありません。でも、そんなことは7月時点で考慮しておくべきだったことではないでしょうか。お粗末な審査内容についてもっと報じてほしいものです。軽症者を対象に薬の効果を判定するということは、そもそも効果が見えにくいということになりますが、重症化や後遺症を防ぐ効果はどうなのでしょうか。↓WBSでは、7月に承認が見送りになっていた理由についても報じられていました。ツイッターで、「ゾコーバ」を含むツイートからワードクラウドを作成。第8波が始まっているようです。発症から3日以内に服用すべき、というゾコーバは本当に役立つのでしょうか。そういえば、21時のNHKのニュースやテレビ東京のWBSなどでは、大きく取り上げられていましたが、テレ朝の報道ステーションでは、極めて小さな扱いでした。報道ステーションのスタッフは、スポンサーの中外製薬に配慮したい、また、政府発表を大きく取り上げたくない、といったことを考えたのでしょうか。「替え玉受験」のニュースをとても大きく扱っていました。「替え玉受験」よりも「ゾコーバ」の方が重大なニュースなのではないか、と思うのですが・・・。インフルエンザ薬などで、塩野義製薬と競合している中外製薬への配慮でしょうか?スポンサーあっての番組ですから・・・。ネット広告全盛の昨今、テレビ局にとって、CMスポンサーへの忖度は重要性を増しているのでしょう。それにしても露骨です。
2022.11.23
コメント(0)
PSPから自宅内にあるソニーのロケフリのベースステーションに接続する設定をしていたところ、遠隔地(自宅外)に設置してあるロケフリのベースステーションに接続してしまいました。ちょっとわかりづらいと思いますので、説明します。遠隔地(自宅外)にあるロケフリに接続して使用していたPSPを自宅に持ち帰って自宅内のロケフリに接続しようとしました。PSPのロケーションフリーのアプリを起動し、自宅内のロケフリをPSPのアクセスポイントとして設定して接続したところ、遠隔地(自宅外)に設置してあるロケフリに接続してしまいました。逆の場合、つまり、遠隔地(自宅外)から自宅内に設置したロケフリへの接続はできなかったため、ソニーのロケフリ用のDDNSサーバーのサービスは終了したものと思っていました。自宅に設置しているのは、US版のロケフリで、自宅外に設置してあるほうは日本版のロケフリなので、US版のDDNSサービスは終了し、日本版のDDNSサービスはまだ生きているということなのでしょうか。しかし、nslookupコマンドではサイバーを「見つけられません」となってしまいます。少なくとも、日本版のロケフリ用のDDNSサービスは生きているのかもしれません。ただし、自宅外の日本版のロケフリベースステーションに接続していたパソコンは、自宅から自宅外の日本版のロケフリに接続できていないので、もっと調べてみる必要がありそうです。【追記】下記のサイトで日本版およびUS版のロケフリベースステーションで使用しているDDNSアドレスを試したところ、それぞれIPアドレスの情報が表示されました。つまり、ロケフリのDDNSサービスはまだ利用できる状態にあります。nslookupテスト【DNSサーバ接続確認】結果 (cman.jp)でも、自宅からNetAVのチェックをすると、「netavcheck.locationfree.sony.net により、接続が拒否されました。」となってしまいます。これは、自宅外の日本版のロケフリの場合も同様に接続拒否になってしまいます。それでも、自宅のPSPから自宅外のロケフリの視聴はできます。下記のページ自体は生きているのですが・・・。http://netavcheck.locationfree.sony.net/メモリースティック ProDuo 変換 SDから変換 PSP価格:390円(税別、送料別)(2022/11/19時点)楽天で購入
2022.11.19
コメント(0)
日本の新規感染確認者数は世界第一位です。断然トップです。新型コロナ発生当初の2020年は、日本の検査数は少なく、当然、感染確認者数も少ない状況でした。今や日本の検査数も増え、感染確認者数は何と世界一位となるようになりました。他国の検査数が減っていることがその最大の理由かもしれません。日本の常識は世界の非常識ということなのでしょうか。
2022.11.16
コメント(0)
前回のスクリプトの後に下記のスクリプトを追加して、整形したデータをCSVファイルに書き出します。dnum <- today()write_as_csv(df_smr4,paste0("SMR_",dnum,".csv"),fileEncoding = "UTF8")次にグーグルスプレッドシートにCSVファイルのデータをインポートします。後は、データポータルにスプレッドシートのデータを読み込み、「地域」の列のデータ型を「都市」のデータ型にするだけです。データポータルで読み込んだデータを設定すると、とりあえずデータポータルの地図での可視化は完了です。ただし、一部の自治体でデータが表示されていません。地域名に対して追加の処理が必要なようです。例えば、市区町村名を「都道府県名+市区町村名」にすることが考えられます。自治体コードをキーとして「都道府県名+市区町村名」を持ったデータと結合する方法が簡単かもしれません。その処理について今後考える必要がありますが、今回はここまでとしておきます。https://datastudio.google.com/u/0/reporting/a4867a08-6790-4ed0-88d5-7c0fc70f2dde/page/p_db9qg48i0c以前、データポータルでマイナンバーカードを使用してコンビニで住民票交付が可能な自治体のマップを作成していますが、そのデータポータルのページを複製し、SMRのデータにつなぎ替えてみました。プルダウンで病名を選択して、その病気の市区町村別のSMRを地図上で見ることができます。簡単にデータマップが作成されました。データポータルでの設定作業はごく短時間で完了します。手間がかかるのは、データポータルで利用できる形にデータを整形する作業です。政府が公開しているデータの形式がより利用しやすい形になれば、無駄な作業をしなくて済むのですが・・・。
2022.11.14
コメント(0)
前回の投稿から、スクリプトの修正を行い、データを縦持ち(ロング型)に変更するスクリプトを追加しました。下記のスクリプトがデータを縦持ちにする処理です。1行ごとにデータの説明項目と数値項目が記述されているデータ形式にすることで、BIツールなどで利用しやすくなります。df_smr1 <- df_smr %>% pivot_longer(cols = starts_with("SMR"),names_sep= "_",names_to = c("SMR","死因1","死因2","性別"),values_to = "SMR_")↓この形式のデータに整形すれば、データポータルに読み込むまであともう少しです。地域名が「01北海道」のように「数字+地域名」となっているので、数字と地域名に分ける処理する必要があります。数字のコードと地域名の文字列はあらかじめ2列に分割しておいてもらいたいものですが、よくわからないデータの仕様です。下記のスクリプトで、地域の列の数字+地域名から数字を抜き出して別の列を作成し、抜き出した後で地域の列の数字を削除しました。分割処理がスマートですが、方法が不明だったため、とりあえず単純な処理の組み合わせで対応しています。後で、正規表現を使っで数字と文字を表して分割処理する方法を調べてみようと思います。df_smr3 <- mutate(df_smr2,str_extract_all(df_smr2$"地域", "[0-9.]+"))df_smr4 <- rename(df_smr3,"地域No"= 6)df_smr4$"地域" <- str_replace_all(df_smr4$"地域" ,"[0-9.]+","")<R言語のスクリプト例>df_temp_smr <- read_excel("hyo5_h2529.xlsx",col_names = FALSE,skip = 5,n_max = 3) df_temp_smrview(df_temp_smr)df_temp_smr0 <- df_temp_smr %>% fill(everything()) temp_colname <- tibble(a1=as.character(df_temp_smr0[1,]),a2=as.character(df_temp_smr0[2,]),a3=as.character(df_temp_smr0[3,]),) %>% mutate(SMR = "SMR") %>% select(SMR,everything()) view(temp_colname)colname <- fill(temp_colname,everything()) %>% unite(col = "name",everything()) %>% .$namecolname <- str_replace_all(colname," ","")colname <- str_replace_all(colname," ","")colname <- str_replace_all(colname," ","") colname <- c("地域",colname)view(colname)df_smr <- read_excel("hyo5_h2529.xlsx",col_names = colname,skip = 8) view(df_smr)df_smr1 <- df_smr %>% pivot_longer(cols = starts_with("SMR"),names_sep= "_",names_to = c("SMR","死因1","死因2","性別"),values_to = "SMR_")df_smr2 <- df_smr1 %>% unite(col = "死因","死因1","死因2" )view(df_smr2)df_smr3 <- mutate(df_smr2,str_extract_all(df_smr2$"地域", "[0-9.]+"))df_smr4 <- rename(df_smr3,"地域No"= 6)df_smr4$"地域" <- str_replace_all(df_smr4$"地域" ,"[0-9.]+","")view(df_smr4)
2022.11.03
コメント(0)
標準化死亡比(SMR:Standardized Mortality Ratio)という指標があり、死因別に各市区町村が全国を100とした場合に、その市区町村での死亡数が多い傾向にあるのか、少ない傾向にあるのかを知ることができます。SMRは、年齢階級のデータを利用して算出した期待死亡者数と実際の死亡者数の比です。期待死亡者数は基準となる集団での死亡率を用いて計算されます。例えば、全国のデータを基準値とすると、全国の40~44歳の人口に対して、ある死因による全国の40~44歳の死亡者数がどれくらいの比率なのかを計算します。その比率を各市区町村の40~44歳の人口に掛け合わせることで、各市区町村の40~44歳における期待死亡者数が得られます。45~49歳、50~54歳・・・の各年齢層でも同様に期待死亡者数を算出し、ある死因による各市区町村の期待死亡者総数と各市区町村の実際の死亡者総数の比がSMRということになります。今回、政府の公開データをデータポータルの地図で可視化しようと思います。政府の公開データをデータポータルで扱える形に整えるためには、「データの前処理」「データのクレンジング」といった処理が必要です。政府の公開データの表は、人が見て見やすい形の表の形式になっていますが、そのデータの形式をBIツールや統計解析ソフトに適したデータ形式に変換する必要があります。その処理のことを「前処理」と言います。ある意味で「データの前処理」は不毛な作業ですが、データの利活用には不可欠な作業です。「不毛な作業」というのは、前処理が不要なデータ形式で公開されていれば、全く必要のない作業だからです。↓こちらのページでR言語による政府統計のデータ前処理の方法が紹介されています。「まず、列名情報だけを整える」というアプローチはわかりやすく、有効であると思いました。https://maeshori-r.connpass.com/event/219249/今回は、上記の「まず、列名情報だけを整える」という方法とR言語のスクリプトをそのままマネさせていただき、政府の公開データ「標準化死亡比,三大死因・性・都道府県・保健所・市区町村別」の表の前処理をしてみました。データポータルで地図を作成するのが目標ですが、とりあえず、表の列名の整備までがほぼできた感じです。前処理をした列名でデータを読み込むことができました。この程度の処理は、もちろんExcelのシート上で手作業で行う場合が多いと思いますが、R言語のスクリプトで処理できるようにしておけば、より複雑な表の場合や同じ処理を繰り返す必要がある場合に役立ちます。また、この方法であれば、元のデータファイル自体を直接変更せずに処理することが可能であるため、間違ってデータの入っているセルを消したり、上書きしたりといった手作業でのケアレスミスを防ぐことができます。※追記:文字列中の空白が削除できていませんでしたので、下記のスクリプトに修正しました。colname <- str_replace_all(colname," ","")【R言語による前処理の例】df_temp_smr <- read_excel("hyo5_h2529.xlsx",col_names = FALSE,skip = 5,n_max = 3) df_temp_smrdf_temp_smr0 <- df_temp_smr %>% fill(everything()) temp_colname <- tibble(a1=as.character(df_temp_smr0[1,]),a2=as.character(df_temp_smr0[2,]),a3=as.character(df_temp_smr0[3,]),) %>% mutate(SMR = "SMR") %>% select(SMR,everything()) colname <- fill(temp_colname,everything()) %>% unite(col = "name",everything()) %>% .$namecolname <- str_replace_all(colname," ","")colname <- c("地域",colname)df_smr <- read_excel("hyo5_h2529.xlsx",col_names = colname,skip = 8) view(df_smr)=============================<以下は、出典や参考情報源>下記のURLに市区町村別のSMRの公開データがあります。「標準化死亡比,三大死因・性・都道府県・保健所・市区町村別」https://www.e-stat.go.jp/stat-search/files?page=1&layout=datalist&toukei=00450013&tstat=000001143831&cycle=7&stat_infid=000031976400&cycle_facet=cycle&tclass1val=0下記のURLのページでは、Pythonによるデータ処理後、データポータルで市区町村別のSMRについて可視化した例が紹介されています。https://zenn.dev/kaorumori/articles/403ea0f2414b70
2022.10.31
コメント(0)
9月末から検査方針が変わったいう日本ですが、国・地域別の日々の感染確認者数では世界第2位となっています。世界的に見て、まだまだ日本の検査数は多いということでしょうか。かつては、検査能力が低く、検査数が少ないとされていた日本ですが、一体何がどうなっているのでしょうか。なお、第1位は台湾、第3位はイタリア、第4位は韓国です。日本の日々の感染確認者数の推移を見ると、9月末からはほぼ横ばいになっています。
2022.10.24
コメント(0)
ゼロコロナ政策の中国では、確かに、感染確認者数は少ない状態が維持されているようです。死亡者数も非常に少ない状態が維持されています。しかし、都市のロックダウンなど、極端な政策による抑え込みをしているとすれば、その代償として社会・経済活動には相当な悪影響が出ているのではないでしょうか。
2022.10.17
コメント(0)
ウクライナでも新型コロナの感染確認の検査が行われていて、感染確認者数の状況を見ることができます。なお、ロシア侵攻後の3月からは検査数が極端に減っていることがうかがえます。ウクライナでは、9月に感染確認者数が増加しています。しかし、10月に入ってからは、不自然に数字が低水準になっています。検査の方針が変わったのでしょうか。
2022.10.10
コメント(0)
日本の検査方針の変更によるものでしょうか。一日あたりの感染確認者数で、日本は第3位になりました。9月末に検査方針が変わっているので、直近で感染状況が改善しているのかどうかはわからなくなっている、と言えるのかもしれません。JHUの日本のデータのパッチがリリースされたのでダッシュボードを更新しました。昨日の夕方時点のデータでは、この1週間の日本の日々の感染確認者数の数字がゼロとなっていましたが、パッチで修正されています。
2022.10.04
コメント(0)
Disney Plus(ディズニープラス)をWindows PCで視聴する場合は、ブラウザではなく、ストアアプリの利用がおすすめです。ディズニープラスは、Netflixと同様に、ドルビーデジタルプラスの5.1サラウンドサウンドをブラウザでは利用することができません。Microsoftストアから無料で入手できるアプリでの視聴であれば、ドルビーデジタルプラスの5.1サラウンドサウンドを利用することができます。下の画像は、ストアアプリの画像です。画像の下部に「5.1」という表示がありますが、ブラウザの場合には、この「5.1」の表示は出てきません。5.1サラウンドサウンドのほうがステレオサウンドよりも通信データ量は少し多いでしょうから、データ通信量を抑えたい場合は、ブラウザを利用することもあり得るかもしれませんが、その差はわずかなものだと思います。Windows Sonic for HeadphonesやDolby Atmos for Headphonesなどを利用すれば、普通のヘッドホンやイヤホンでサラウンドサウンドを楽しむことができます。なお、Windows Sonic for HeadphonesやDolby Atmos for Headphonesでは、重低音が強調されるので、音量を上げ過ぎないように注意する必要があるでしょう。
2022.09.26
コメント(0)
新型コロナ流行初期に、相対的に感染確認者数が少なかった日本、台湾、韓国などが、一日あたりの感染確認者数ランキングの上位となっています。ロシアが感染確認者数の1位になりましたが、ロシアで何が起きているのでしょうか。今後、日本では「全数把握」をしないことになるとのことですが、どのような統計値になるのかが注目されます。日本の月間死亡者数は、9月も多いですが、このことについての政府の見解を知りたいものです。
2022.09.26
コメント(0)
日本の第7波は終息に向かっていますが、日々の感染確認者数では日本が世界一をキープしています。「全数把握」をしなくなるまでは「世界一」は続くかもしれません。「全数把握」がされなくなると、統計上はコロナによる死亡者数も激減するのかもしれません。
2022.09.20
コメント(0)
Windows パソコンでアマゾン・プライム・ビデオを視聴する場合、プライムビデオのストアアプリを利用する方法が手軽ですが、アマゾン・プライム・ビデオはブラウザでも視聴できます。ブラウザでの利用であれば、レビューを読めたり、SLL機能を使えたりします。SLLとは、台詞ごとの字幕をサイドバーに表示させて、台詞をリピート再生させたり、単語の意味を見たりできる便利なものです。SLLの機能はEdgeブラウザでも利用できます。なお、Edgeブラウザでは、HD1080Pの画質で視聴できます。SLLでの再生を選択し、英語のタイトル名で字幕ファイルを検索して、字幕ファイルを読み込むことで利用できるようになります。英語の字幕が画面の下に表示されるのですが、その表示のタイミングは、画面下のスピードメーターのアイコンをクリックして調整します。タイミングを合わせるためには、試行錯誤が必要のようです。「Father Brown(ブラウン神父)」(田舎の村なのに殺人事件が多発。ブラウン神父が事件を解決する、というBBCのミステリードラマ)とかは、英語学習にいいのではないかと思います。SLLを利用すると、プライム・ビデオが英会話教室になります。クラシエ ヨーロピアン ワッフルサンド 85ml×18個新商品 差し入れ 贈答品 プレゼント 誕生日 冬休み お祝い 年末年始 御年賀 パーティー バレンタイン 在宅勤務 おうち時間 ステイホーム 母の日 こどもの日価格:3693円(税別、送料別)(2022/9/22時点)楽天で購入
2022.09.18
コメント(0)
日本の感染確認者数は減少傾向にありますが、日々のの感染確認者数では、日本が世界一です。他の国では、検査数が減っているということでしょうか。コロナのパンデミックの最終局面で、日本の感染確認者数が世界一になるとは・・・。日本のコロナ対応の諸国との違いというか、対応の遅さを象徴しているのかもしれません。なお、死亡者数も減少傾向にありますが、まだ日々の死亡者数の水準は高いと言えます。9月の月間死亡者数もかなり多くなりそうです。なお、日本の感染確認者数の累計は、2千万人を超えました。
2022.09.12
コメント(0)
8月の国内の月間死亡者数は過去最高の7000人超となりました。9月の死亡者数もかなり多くなりそうです。ところで、新型コロナによる死亡者数と、他の原因で死亡した人が新型コロナに感染していた数が明らかになっていません。死亡者数について大きな騒ぎにはなっていないません。ということは、新型コロナによる死亡だけでなく、死亡者がたまたま新型コロナに感染していた、というケースも多いということなのでしょうか。なお、感染確認者数は減少に転じています。
2022.09.04
コメント(0)
パソコンでアマゾン・ミュージックのポッドキャストを聴きながら寝落ちしてしまうと、ポッドキャストの再生が一晩中ずっと続くので、睡眠が浅くなって、翌日は寝不足になってしまいます。ポッドキャストを聴きながら寝る場合は、スリープタイマーが必要です。しかし、何故かアマゾン・ミュージックのパソコン用のアプリにはスリープタイマー機能がありません。そうだ!アプリを終了させるバッチファイルだ!と思い付きました。とりあえず、アマゾン・ミュージックが起動している状態で、コマンドプロンプトで、tasklistを実行し、終了させる対象のプログラム名を探して確認します。「Amazon Music.exe」というのがありました。どう見てもこれが終了させる対象です。試しに、コマンドプロンプトで、taskkill /im Amazon Music.exeと入力しましたが、これではだめでした。「エラー: 無効な引数またはオプションです - 'Music.exe'。」と表示されてしまいました。プログラム名が認識されていません。そこで、taskkill /im "Amazon Music.exe"のように、プログラム名を""で囲むと成功しました。Amazon Music.exeは複数あり、常駐のものは/fのオプションを追加する必要があるようですが、まあ、taskkill /imでアプリは閉じたのでこれでいいでしょう。ついでに、パソコン自体もスリープさせておきましょう。メモ帳のアプリで、下記の3行を記し、拡張子を「.bat」に変更して保存します。とりあえず、1時間で終了処理をさせたいのでタイマーは3600(秒)と指定しておきます。バッチファイルの動作をテストする場合、3600を10にすると、10秒後に処理が始まります。その昔、「藤山寛美3600秒」という番組があったような・・・。あとは、寝る時にこのバッチファイルをダブルクリックして起動させれば、アプリの終了とパソコンのスリープ処理の実行に向けたカウントダウンが始まります。timeout /t 3600 /nobreaktaskkill /im "Amazon Music.exe"rundll32.exe PowrProf.dll,SetSuspendStateパソコンをスリープさせるだけであれば、下記の2行でいいのですが、スリープから復帰すると、アマゾン・ミュージックの再生も再開してしまいます。朝に、前の晩の続きが始まるのはどうかと思うので、アプリを終了させておいたほうが、新たな一日の始まりとしては気分がよさそうです。それにしても、taskkillコマンドで「kill」という単語が使われているのはすごいセンスですね。AIが反乱を起こすきっかけになりそうなコマンドではあります。↓パソコンをスリープさせるだけであれば、下記の2行だけです。timeout /t 3600 /nobreakrundll32.exe PowrProf.dll,SetSuspendStateWindows PCは、スリープタイマー機能を手軽に自作できるのでとっても便利です・・・、というか、アマゾン・ミュージックのPC用アプリにスリープタイマー機能が無いのは何故?!
2022.09.02
コメント(0)
日々の感染確認者数はピークに達したようですが、月間死亡者数は、この8月が過去最高になっています。9月も死亡者数が多くなりそうです。真夏にこれだけ死亡者数が多いということは、冬に第8波が来ると、死亡者数はさらに多くなるのでしょうか。
2022.08.29
コメント(0)
電気代節約とエコのために、できるだけテレビの視聴はソニーのロケーションフリー(LF-PK20)を利用し、PSPあるいはパソコンで視聴するようにしています。LF-PK20は、10年以上前のソニー製品ですが、まだ動作しています。録画機能のないnasneという感じの製品です、アナログ放送チューナー搭載なので「砂嵐」を鑑賞することもできます。これからLF-PK20を購入する場合は、主に中古品の購入ということになるのでしょうが、時々、「新品」というのが売られています。流通在庫品などでしょうか。自宅外からの視聴ですが、さすがに、ソニーのロケフリ用のダイナミックDNSサービスが終了している気配がありますが、LF-PK20を接続しているLANへのVPN接続ができていればパソコンでの視聴は問題なく可能です。コマンドプロンプトのnslookup(ドメイン名からIPアドレスを調べるコマンド)を試したところ、ソニーのロケフリ用のダイナミックDNSの場合、「XXXXX.LF-PK20JP.MyNetAV.comを見つけられません: Server failed」となります。ソニーのロケフリ用のダイナミックDNSサービスは終了していると考えられます。従って、家の中での視聴は全く無問題ですが、自宅外からの視聴の場合は、他のダイナミックDNSサービスを利用する必要があります。専用のダイナミックDNSサービスの終了は、LF-PK20の価値を下げる要因ではあると思います。さて、大画面テレビだと200Wを超えるものも多いですが、地デジチューナーとロケフリとPSPでの視聴では、その「7分の1」から「10分の1」くらいの消費電力になるでしょう。LF-PK20の消費電力は、仕様表によると「約12.4W(テレビ視聴時)」となっています。これは、LF-PK20内蔵のアナログチューナー動作時のもののようです。まあ、デジタル放送のチューナーを内蔵している分、nasneのほうが省エネになるでしょう。とにかく、冬には太陽光による発電量が低下し、深刻な電力不足が繰り返される可能性が高いです。映画や紀行番組などは、大画面で見たいですが、ニュースや情報番組、バラエティ番組などは小さな画面でも十分な場合が多いと思います。個人の感想ですが、大画面の有機ELテレビでバラエティを見るのは電力の無駄遣いという気もします。パソコンでの視聴では、画面サイズを最小にして、画面を右クリックし、「画面最前面に表示」としておけば、ブラウザなどを利用しながらテレビ視聴ができてとても便利です。「画面最前面に表示」の機能はとても便利です。パソコンでブルーレイレコーダーなどに接続して地デジやBS放送、録画番組を視聴できる「DiXiM Digital TV」のアプリがありますが、DiXiM Digital TVには、画面を常に手前にしておく設定はありません。ロケフリでは、「画面最前面に表示」の設定があるので、例えば、dマガジンをブラウザで全画面サイズで読みながら、テレビも視聴できます。テレビを見ながら雑誌を読むということが目線の大きな移動なしでできます。なお、ロケフリ(LF-PK20)にはIODATAの地デジ・3波対応チューナーを接続しています。ロケフリ(LF-PK20)は、古いブルーレイレコーダーとの接続にも向いています。ブルーレイレコーダーの古い機種の場合、DiXiM Digital TVで録画番組は視聴できても、ライブ視聴ができないものがあります。ライブ視聴の機能はロケフリ(LF-PK20)で補えるということになります。もちろん、DiXiM Digital TVに全く対応していない機種にロケフリ(LF-PK20)を接続して使うこともおすすめです。ワイヤレス視聴非対応のチューナーなので、パソコンなどで見るにはロケフリが必要になります。しばらくは、チューナーのリモコンで選局していたのですが、やはり不便なので、学習リモコン機能を使ってIODATAのリモコンの信号を登録しました。登録自体はそれほど難しくはなく、パソコンでロケフリの外部入力でテレビを視聴しながら、リモコンの設定画面で学習リモコンの「汎用リモコン」をベースにして「電源ボタン」利用するチャンネル番号、チャンネルの「↑↓選択ボタン」を登録しました。画面の指示通りに操作すれば簡単にリモコン信号を登録できます。簡単とはいえ、面倒です。信号データがロケフリにデフォルトで登録されているチューナーであれば、登録作業は不要なのですが・・・。以下は、備忘録です。フォルダのパスとかはすぐ忘れてしまいます。登録したリモコンのデータは、パソコンの下記のフォルダに保存されています。「ProgramData」は隠しフォルダなので、表示されるよう設定しておきます。"C:\ProgramData\LF\RC_DATA"PSPに上記のリモコンデータのファイル(UNIV0001.rcd)を保存する場合は、メモリースティックの下記の場所に保存します。メモリースティックに「MSSONY\LF\RC_DATA」のフォルダがない場合はフォルダも作成します。"I:\MSSONY\LF\RC_DATA\UNIV0001.rcd"(パソコンにUSBカードリーダーをつなぎ、Iドライブとして接続した場合)なお、同時視聴が1つの機器でしかできないのに、1つのプレーヤーアプリのシリアルで複数台のパソコンを登録するようなことができません。プレーヤーアプリ(LFA-PC20JP)はパソコンごとに必要です。米国市場向けのロケフリLF-V30用のアプリもLF-PK20では「リージョンが違う」と警告が出て利用できません。なお、LFA-PC20JPは、Windows 10のパソコンでも問題なく利用できています。プレーヤーアプリがないと、パソコンでは視聴できないので注意が必要です。中古品では、ベースステーションのみの場合があるので注意が必要です。PSPでの視聴は可能ですが、学習リモコンの登録にはパソコンのプレーヤーアプリが必要となります。なお、旧型のベースステーションのLF-PK1用アプリはWindows 7以上のパソコンにはインストールできなかったので、この点にも注意が必要です。省エネのために、小さな画面で視聴できる大画面テレビというのもありましたが、パソコン用モニターと地デジチューナーの組み合わせというのも省電力になる場合があります。モバイルモニターと地デジチューナーの組み合わせというのもよさそうです。持ち運べる防水テレビというのもあります。下記のモデルだと視聴時の消費電力は20W前後でしょうか。でも、このような商品はバッテリー寿命が製品寿命のようなところがあります。バッテリー交換費用が安ければいいのですが。余談ですが、バッテリーを利用する製品が多岐にわたってきていますが、バッテリーの汎用規格化などをしていかないと、「バッテリー寿命=製品寿命」という製品が大量に廃棄されることになります。「バッテリー寿命=製品寿命」というのは、メーカーにとってはメリットでしかないでしょうが・・・。リチウムイオン電池などのバッテリー搭載機器の普及は、近い将来の大量の危険な廃棄物の普及ということになります。かつてのガラケーのようにバッテリーパックは交換式にしてもらいたいものです。レジ袋とかストローとか騒いでいるのは茶番でしかなく、バッテリーの汎用規格化によって交換を容易にし、バッテリーのリサイクルを確立していく必要があると思うのですが・・・。EUなどが強力な規制を設けてもらいたいものです。【即納】パナソニック 10V型 ポータブル 液晶テレビ プライベート・ビエラ 防水モデル UN-10E10-W ホワイト【送料無料】【KK9N0D18P】価格:35800円(税別、送料別)(2022/8/29時点)楽天で購入メモリースティック ProDuo 変換 SDから変換 PSP価格:390円(税別、送料別)(2022/9/2時点)楽天で購入
2022.08.27
コメント(0)
日本の日々の感染確認者数はほぼ横ばいです。お盆休みが終わり、感染確認者数はやや増えてきています。一日あたりの感染確認者数では、日本が世界一になっています。これは、他国の検査の状況が日本と異なってきているからだと思われます。多くの国では、無症状者の検査は減ってきているのではないかと思われます。検査の方針が変わらない限り、日本の感染確認者数が多い状況は、しばらく続きそうです。なお、一日あたりの死亡者数では、日本は米国に次いで2番目となっています。
2022.08.21
コメント(0)
ほとんど使っていなかったノートPC(10年前の古いdynabookブランドのUltrabook: dynabook R631/23E)のSSDを交換しようと思います。マイナポイントを使って、mSATAタイプのSSD(256GB)と8GBメモリを購入しました。裏蓋に1本だけある、頭が星型のネジ用の工具はマイナポイント外となってしまいました。ノートPCをほとんど使っていなかった理由は、SSDが128GBしかなく、空き容量不足によりWindows Updateもできなくなってきていたからです。WindowsのパソコンのCドライブでは、256GBくらいの容量はほしいところです。そうでないと、Windows Updateなどに支障が出てくると思います。Cドライブ64GBのパソコンとかもありますが、大容量のドライブへの交換は必要だと考えておいたほうがいいと思います。さて、交換方法ですが、OSの標準機能のディスクイメージのバックアップを利用するという方法もあると思いますが、手元にHD革命の古いバージョンがあったので、ユーティリティソフトのクローン作成機能を利用してSSDを交換しようと思います。ただし、mSATAタイプのSSD用のケースとかUSB接続機器が手元にないため、直接のクローンコピーができません。そこで、HD革命の「ディスクからイメージファイルをクローン」という機能を利用して「クローンイメージ」をUSB接続のHDDに保存しました。後は、SSDを交換後にクローンイメージを新しいSSDに入れるだけです。そのためには、何らかの起動ディスクが必要です。HD革命にもWindows PEディスクの作成機能があるのですが、うまく作成できませんでした。Windows PE起動ディスクは、MicroSoftのサイトから素材をダウンロードして作成可能だそうですが、必要なファイル、処理手順などがわかりにくく、結構ハードルが高いと思います。Windows PE起動ディスク自動作成ツールなるものが、サードパーティから出ているので、それを利用することにしました。SSD交換対象のPCとは別のPCを利用し、AOMEI PE Builderというフリーソフトでの作成を試してみました。フリーソフトとはいっても、作成したPEディスクに入っているいろいろな機能を使う場合は有料へのアップグレードが必要になります。とりあえず、USB接続のカードリーダー(ケーブルがないタイプ)に8GBのSDカードを入れて、Windows PEを入れました。Windows PE自体のサイズは小さく、SDカードは2GBや1GBのもので十分なようです。SDカードでも、USB接続ということにすれば、OKでした。ただし、Windows PEの作成のためには、PCに4GB以上の空き容量が必要なようです。PCが起動しなくなった、といった場合などにもWindows PE起動ディスクは重宝するはずなので、SDカードが余っていれば、作成しておくことをおすすめします。古いノートPCのHD革命のツールでうまくいかなかったのは、作成プロセスに必要な空き容量がなかったからのようです。「AOMEI PE Builder」「Windows PE」を利用したOSの復旧環境を手軽に作成できるツールと関連ツールのセット - 窓の杜さて、mSATAタイプのSSD(256GB)の換装とメモリ交換ですが、物理的な交換は簡単でした。裏蓋はネジのみで固定されていて、ツメなどはありませんでしたので、交換は20分ほどで終了です。やはり、ツメなしだと超簡単です。メンテナンスを考えると、裏蓋がネジ止めのみかどうかは、カタログスペックに明記しておいてもらいたいと思います。製品選びの重要な要素です。2GBのメモリも8GBメモリに交換して、計10GBにしました。OSのクローンイメージからの復元は、AOMEI PE BuilderではUSB接続のHDDを認識できなかったため、結局、外付けのグルーレイドライブを接続し、HD革命のブート用CDを利用することになりました・・・。USB接続のHDDは、USB2.0のポートに接続したところ認識されましたので、AOMEI PEの問題ではなかったのかもしれません。とにかく、USB3.0のポートでは問題があるようです。いずれにしても、HD革命で作成したクローンイメージなので、そのままAOMEI PEによる復元はできません。AOMEI PE環境で、HD革命のコピーツールを起動して・・・、といったことを妄想していたのですが、難しそうだったので、手元にあったHD革命のブートCDを利用しました。結局、費やした時間は、クローンイメージ作成に1時間、クローンイメージからの新SSDへのクローンに1時間、物理的な交換に20分といったところでした。128GBという少ない容量だったので、それほど時間はかからなかったと思います。なお、クローンを作成後に、SSDの未割当の領域を割り当てる必要がありますが、Cドライブの右に「休止パーティション」なるものがあり、GUIでは削除できず、CUIのdiskpartを使って削除する方法を調べるのに20分ほどかかりました。「休止パーティション」とは、RAMの内容を保持するためのもののようで、dynabookの仕様のようです。メーカーによっては、RAMのサイズと同容量の「休止パーティション」なるものがあるようです。Windowsのdiskpartコマンドでディスクのパーティションを操作する:Tech TIPS(1/3 ページ) - @ITWindows PEのSDカード作成で1時間ほど使っていますが、これは勉強ということになるでしょう。メモリは10140MBと表示されました。オンボードの2GBと8GBで計10GBです。それにしても、元の128GBのmSATAですが、USB接続ケースとかは2000円くらいかかります。その価格であれば、128GBのSDカードやUSBメモリが買えるので、役に立たない感じです。256GB SSD 内蔵型 mSATA III 6Gb/s SUNEAST サンイースト 3D TLC TRIM機能 SLCキャッシュ技術 R:530MB/s W:450MB/s 簡易包装品 SE800-m256GB ◆メ価格:4299円(税別、送料別)(2022/8/21時点)楽天で購入【フラット LANケーブル cat6e 10m】GSPOWER 送料無料 当日出荷 1年製品保証 業務用 企業向け 1.3mm厚 カーペット 赤 青 白 黒 黄 ストレート ランケーブル RJ-45 サーバー ethernet cable cat6 flat価格:839円(税別、送料別)(2022/8/21時点)楽天で2.0SSd
2022.08.21
コメント(0)
世界中の主な国々で販売されていたにもかかわらず、日本では販売されていなかったMicrosoft 365 Familyがようやく日本でも発売されることになりました。Microsoft 365 Familyは、家族6人まで利用でき、一人あたり1TBのOneDrive(家族計6TB)が利用できるという、既存のものとは大きく内容が異なるものです。現在、ロシアで販売されているのかは知りませんが、数年前に調べた際には、ロシアでも販売されていました。マイクロソフト社の方針転換の理由は不明です。理由としては、以下のようなことが考えられるでしょうか。1.日本での「パソコンバンドル版Office」の売上が低下してきたのでテコ入れを図った2.担当の役員など、意思決定者の考えが変わった3.日本で販売していないのは不自然だと気付いたまあ、3番目の理由はあり得ないでしょう。いずれにせよ、選択肢が増えたのはいいことですが、何故、日本でだけ販売していなかったのか、その理由の詳細を明らかにしてもらいたいと思うのは私だけでしょうか。「Microsoft 365 Family」がようやく日本導入 ~7月19日から提供開始 - 窓の杜マイクロソフト Microsoft 365 Family価格:18399円(税別、送料別)(2022/8/18時点)楽天で購入選択肢が増えてよかったです。
2022.08.18
コメント(0)
日本の感染確認者数の実効再生産数Rtは1を下回り、感染確認者数の増加は止まったようにも見えます。検査数の抑制やお盆休みで検査数が減っていることによるものかもしれませんが、ピークアウトした可能性があると思われます。とりあえず、8月下旬に向けて感染確認者数が再拡大しなければ、ピークアウトということになるでしょう。しかし、第6波のようになかなか感染確認者数が減らない、という状況が長く続く可能性も高そうです。
2022.08.15
コメント(0)
先日、マイナポイントでWi-Fi 6(IEEE 802.11ax)対応のルーターを買ってみました。Wi-Fi 6の実効スループットは、Wi-Fi 5(IEEE 802.11ac)の4倍と言われています。購入したのは、世界シェアNo.1というTP-Link社製のルーターです。IT機器でも中国のブランドが目立つようになってきています。これまで使用してきたルーターが壊れた訳でもなく、とても古いということもないのですが、ルーターが故障すると家のネット接続がダウンしてしまうので、予備機が必要かも、と考えた次第です。NTTから借りている光回線の終端装置(ONU)の予備もほしいくらいです。NTTの修理対応は迅速ではなさそうなイメージです。光回線の工事の際に、信じられないくらい長期間待たされた苦い記憶があります。なお、ONUは、NTTとMACアドレスで認証しているようなので、勝手に交換はできないようです。でも、引っ越した時には、ONUを持って行って、光回線の工事を待っていましたが、新しいONUにしてほしかったと思います。まあ、回線工事の際に取り付けられるのが新品とは限りませんが。ルーター交換後、10日ほど使用していますが、特に問題はないようです。DLNAサーバーとしているパソコンに接続できなくなりましたが、これは、パソコンに固定IPを設定していたためで、新しいルーターのアドレスをデフォルトゲートウェイやDNSに設定し直して解決しました。固定IPにしていたのを忘れていて、「何でつながらないのだろう」としばらく悩みました・・・。Wi-Fi 6(IEEE 802.11ax)対応機器を持っていないので、Wi-Fi 6(IEEE 802.11ax)対応のルーターではなく、Wi-Fi 5対応ルーターを買ってもよかったのですが、「48台接続」というところに惹かれて下記のモデルを購入しました。しかし、Wi-Fi 6の機器ならたくさん同時に接続できる、という意味なのでしょうから、Wi-Fi 6の機器が無いと意味がないのは確かです。。そのほかの機能では、IPv6対応、WPA3対応、VPN対応や無料のダイナミックDNSサービスなど、多機能な割にリーズナブルな価格である点もいいと思いました。IPv6やWPA3をすぐ利用することはないですが、対応していると長く使えそうです。特に、無料のダイナミックDNSサービスが使えるのは、他のメーカーにない特長です。VPN接続を考えているのであれば、有力な選択肢になると思います。それにしても、Wi-Fi 6対応のUSB接続の無線LAN子機の価格は、まだ高く、ルーターが買えるような価格のものが多くなっています。といっても、有線LANで2.5Gbpsや10Gbps対応を図るよりもWi-Fi 6対応のほうがずっと安上がりであることは確実でしょう。購入したルーターの箱には、Wi-Fi 6の場合の最大値が2402Mbpsと書いてありますが、ノートパソコンの内蔵の無線LANカードを交換すればその速度の恩恵を受けられることになります。もうワンランク上のルーターだと最大値が4324Mbpsという速度になるようです。Wi-Fi 6の普及は、宅内LANで有線LANがさらに衰退していく契機になりそうです。デスクトップパソコンもWi-Fi 6対応ルーターの安い機種とWi-Fi 6子機を使ったほうが、2.5Gbpsの有線LANへの対応をするよりも安上がりです。まず、有線LANで2.5Gbps対応を図ると、ハイエンドの対応ルーターが必要になります。LANポートが2.5Gbps対応のルーターは、安いものでも私の購入した機種の倍くらいの価格になります。さらに、スイッチングハブも必要な場合はかなりの出費になります。LANケーブルはそれほど高くはないので、PCが複数台の場合はスイッチングハブなしで、ルーターと直接接続したほうがよさそうです。2.5Gbps対応のスイッチングハブはハイエンドのルーターが買える価格のものが多く、複数の部屋にスイッチングハブをそれぞれ配置するようなことをすると、費用はとんでもないことになります。そもそも、家庭での用途では安定性はクリティカルではなく、ワイヤレスで1Gbpsを超えていて、不安定時に100Mbpsになるような感じであれば、不満はないのではないかと思います。すべてワイヤレスにしてしまえば、各段に安く、複数の部屋に対応できます。ブルーレイレコーダーとかもワイヤレスが標準になってきています。LANポートが2.5Gbps対応あるいは10Gbps対応の機種は高価格帯のハイエンド機種にしかないですが、最近発売された中価格帯の機種のほとんどはWi-Fi 6対応です。なお、2.5Gbps対応にするにはパソコン用のLANアダプターも必要になります。現在市販されているパソコンで有線の2.5Gbps対応のものはほとんどないでしょうから、必ず有線の2.5Gbps対応アダプターが必要です。有線の2.5Gbps対応アダプターとWi-Fi 6子機の価格は大きな差がないようですが、対応ルーターの価格が大きく異なります。発展途上国で、有線の電話よりも携帯電話の普及が進んだのも、電話線を張り巡らすインフラのコストが高かったからです。それと同様に、有線LANのコストのほうが、ワイヤレスのコストよりも高い現状だと、有線LANが衰退していくことになるでしょう。ワイヤレス接続のNASが増えてくるかもしれません。常時、大量のデータを送受信するような用途であれば、有線LANの安定性は必要かもしれませんが、一般家庭の用途では無線LANで十分でしょう。特に、1Gbpsのフレッツ光回線を利用しているのであれば、インターネット利用の実用上は、Wi-Fi 5対応のルーターで困ることはないでしょう。価格も2千円くらいはWi-Fi 6対応のものよりも安いようです。実は、今こそがWi-Fi 5対応のルーターの買い時なのかもしれません。フレッツ光の1GHzの回線では、早朝などのごく限られた時間帯に1Gbpsくらいの速度が出ることもなくはないですが・・・。フレッツ光の混雑時には、100Mbpsを大きく下回るどころか、5Mbpsを下回ることさえあります。ということは、いくら宅内の無線LANが速くても、ネット回線が遅ければ意味がない、ということになります。Wi-Fi 5では、100BASE-Tの有線LANの数倍の速度が出ます。100BASE-Tの有線LANを1000BASE-Tにしたいという場合も、有線LANの代わりにWi-Fi 5の導入で十分な場合が多いのではないでしょうか。4K動画の配信の場合、余裕を見て、50Mbpsくらいの速度であればOKだと思いますが、混雑時にはその速度も維持されていないので、光回線にはもっと「エフォート」をしてもらいたいと思います。4K動画は混雑していない早朝にしか見られない、という状況は改善してもらいたいと思います。動画視聴やゲーム利用のピークの時間帯は、「超満員電車」「高速道路の渋滞」と同じで、利用者は我慢を強いられます。「ベスト」な「エフォート」とは、誰にとって「ベスト」なのでしょうか。回線業者やプロバイダーの収益にとって「ベスト」な「エフォート」のサービスであることを広告などに明記しておいてもらいたいものです。まあ、ITサービスの世界では、5Gとかの携帯電話回線の進化で、フレッツ光のような有線のサービスが廃れることも十分にあり得るので、設備投資には慎重なのでしょう。「最大で1Gbps」と言いながら、「最大で1Gbps」などにはならないように設備の規模を調整しているのは明白です。混雑時に速度が低下するのは、「ユーザーの側の問題」だという認識であることも確かです。高速道路や鉄道と同じで、「混雑時にはなるべく利用しないでください」という感覚なのでしょう。つまり、混雑時をターゲットとして設備を用意していない、ということです。でも、フレッツ光の「最大1Gbps」とかいう虚偽の内容を総務省や公正取引委員会はなぜ注意しないのか、不思議でたまりません。「ベストエフォート」とか「理論値」とかいう言葉でごまかしているのは明白です。「最大1Gbps」どころか、500Mbpsという数字もなかなか見ることはできません。でも、動画配信の視聴などの用途であれば、「最大1Gbps」は不要です。家族で複数人の同時利用ということからすると、「最低でも200~300Mbps」というサービスを実現してもらいたいものです。とにかく、監督官庁と天下り先がズブズブな関係であることが疑われます。電鉄会社が、「混雑解消に努めています」と言いながら、抜本的な対策をしていないのと同じです。利用者が減ると、間引き運転をするのと同じで、ネット回線の場合も利用者が増えても設備増強はせず、利用者が減ると設備を減らす、という構図になっていると思います。つまり、「最大1Gbps」が出るようなことは、2Gbpsなどの、より速い回線に変更しない限りあり得ない、ということは言えると思います。↓ 午後8時ごろだと、10~20Mbpsくらいの速度となり、我が家の最高速度の10分の1以下になってしまいます。金曜の同じ時間帯では、10Mbps未満になります。この速度では4K動画の視聴は無理です。とにかく、ネット利用が主である場合は、光回線などのネット回線の速度がボトルネックになっていて、宅内のルーターや端末の速度が上がっても仕方がない状況です。Wi-Fi 6対応ルーターは、2Gbpsや10Gbpsのネット回線と組み合わせるのが妥当なところです。ベストエフォート1Gbpsの回線を利用しているのであれば、Wi-Fi 5対応のルーターですらもオーバースペックでしょう。そもそも、WANのポートが2.5Gbpsや10Gbpsに対応していないWi-Fi 6対応ルーターというのは、中途半端な製品です。そうです。私が今回購入したのもまさにその中途半端な製品です。WANやLANのポートは1000BASE-Tです。ネットの回線がフレッツ光の「最大1Gbps」の回線なので、ルーターのWANが2.5Gbpsや10Gbpsに対応していても意味がない、ということでもありますが・・・。まあ、WANやLANのポートが2.5Gbpsや10Gbpsに対応しているルーターの機種は2~3万円以上のハイエンド機になってしまいます。また、CATVのネット環境の場合は、ネット利用で、Wi-Fi 6の速度なんてまず必要ありません。宅内LANで、PC間で大きなファイルをやりとりをする使い方だとWi-Fi 6は有効でしょうが・・・。いずれ、ノートパソコンの内蔵の無線LANカードを交換することも検討していますが、実はこのルーターは2.4GHzと5GHzをルーター側で切り替える仕組みのようで、パソコンから見えるSSIDは1つです。前のルーターの場合は、2.4GHzと5GHzのSSIDが分かれていて、パソコンから選んで接続できたのとは違って、パソコンからは選べないようです。ノートパソコンは、ルーターのある部屋から離れた部屋で使用しているため、どうやらルーターから「2.4GHzで接続する機器」として扱われているようで、スピードテストをしても速度が出ません。調べたところ、2.4GHzと5GHzの自動選択は「スマートコネクト」という機能で、ルーターの設定でその機能を無効にすれば、2.4GHzと5GHzを選べるようにできるようなので、今度試してみたいと思います。⇒ 試してみました。というか、「スマートコネクト」はオフにしました。今後、オンにすることはないと思います。ルーターから離れた部屋のPCでも5GHz(IEEE 802.11ac、Wi-Fi 5)で接続すると、それ以前の3~4倍程度の速さが出るようになりました。多少、電波が弱くても5GHzは速いです。このPCは有線LANが100BASE-Tなので、Wi-Fi 5の無線の方が速いということになります。ルーターから離れた場所では、2.4GHzのほうが安定しているという説もありますが、電子レンジ使用時に2.4GHzは途切れることが少なからずあるので、2.4GHzのほうが不安定であるとも言えます。「スマートコネクト」よりも自分で選択できるほうが格段にいいと思いました。2.4GHzの場合、例えばリモート会議中に、家の誰かが電子レンジを使ったりすると回線が非常に不安定になったり、途切れたりするので、「スマートコネクト」は実用的ではありません。最近、海外ではMoca 2.5というTVのアンテナ線(同軸ケーブル)を使った有線LANが注目されているようです。かつて、ADSLの頃でしたでしょうか、電気の配線(電源コンセント)を使ったPLCという有線LANが国内でも注目されていましたが、速度が遅いためか、あまり普及しなかったようです。昔からあるPLCという技術ですが、最近の世代のものだと、速度は向上してきているようです。一方、Moca 2.5だと、理論値で2.5Gbpsという、1Gbpsを超える速度が出るのと、部屋の同軸コンセント(アンテナコンセント)に接続するだけという手軽さから、機器の価格が下がれば国内でもある程度普及するかもしれません追加の配線なしで、複数の部屋の間を安定した速度で通信できるというのは非常に魅力的です。部屋と部屋の間の配線工事の費用が含まれているという考え方をすると、2つの部屋の間の通信であれば約2万円(約1万円のアダプター×2台)で済むので、機器の価格はむしろ安いとも言えます。ただし、Mocaは、BS放送の周波数と干渉する可能性が高いようなので、BSは見ないという家庭での利用になるようです。なお、マイナポイントはWAONで受け取り、イオン系列のミニストップでアマゾンギフトカードを購入し、アマゾンでルーターなどを購入しています。イオンでは、WAONでアマゾンギフトカードが買えないそうなのですが、何故?![キャンペーン中]WiFi6 無線LANルーター 2402+574Mbps Archer AX55/A AX3000 メッシュWiFi USB3.0ポートOneMesh対応 IPv6 IPoE wifiルーター 対応 3年保証【Archer AX50がアップグレード】価格:9800円(税別、送料別)(2022/8/12時点)楽天で購入横幅はありますが、思っていたよりもコンパクトです。↓先日、ルーターと別の部屋の間のLANケーブルをCat6eのものに変えたところ、早朝の5時前の一瞬だけですが、何と1Gbpsの速度が表示されました。でも、1000BASE-Tの環境なのに1Gbpsを超えているというのは測定誤差がかなり大きいということでしょうか。しかし、混雑時には10Mbpsを下回るのは何とかならないものかと思います。まさに、通勤電車と同じ構図で、始発駅の始発電車だと余裕で座れるが、ラッシュのピーク時には地獄の満員電車になってしまう、といったイメージでしょうか。快適なインターネット速度の恩恵を受けるためには、多くの人が寝静まっている時に活動する必要があるというのが現状です。4K動画とかは、ダウンロード可能にならないと、早朝に見るしかなさそうです。【フラット LANケーブル cat6e 10m】GSPOWER 送料無料 当日出荷 1年製品保証 業務用 企業向け 1.3mm厚 カーペット 赤 青 白 黒 黄 ストレート ランケーブル RJ-45 サーバー ethernet cable cat6 flat価格:839円(税別、送料別)(2022/8/21時点)楽天で購入Cate6eなのに、安いと思います。注文後、早く届きました。
2022.08.11
コメント(0)
日本の感染確認者数は、ピークを過ぎたようにも見えます。日本の実効再生産数Rtはわずかに1を上回っていますが、実効再生産数は減少に転じています。ピークを過ぎたように見えるのは、検査数の抑制が生じているからかもしれませんが、もはや、無症状者をあえて検査する必要性はないでしょう。1日あたりの新規感染確認者数では、8月6日はトルコが一位で、日本は二位になりました。
2022.08.07
コメント(0)
何と言うことでしょう。日本の感染確認者数は世界一です。しかも、他の国々に大きな差をあけています。検査体制の充実がようやく整ったということでしょうか。新型コロナ初期では、日本は検査体制が貧弱で、他の国々に大きな差をあけられていました。世界一感染確認者数が多いということは、検査体制がようやく整ったということなのかもしれません。恐らく、「濃厚接触者」は検査をしない国が多くなっているのではないでしょうか。日本の実効再生産数は1を超えているので、ピークはもう少し先のようです。「濃厚接触者」も検査している限り、8月、9月も感染確認者数は多い状態が続くでしょう。【訳あり品】MINISFORUM EliteMini UM350 ストレージ512GB ミニPC AMD Ryzen5 3550H搭載 超小型デスクトップパソコン UM350-8/512-W10Pro(3550H) メモリ8GB Windows 10 Pro ミニスフォーラム MiniPC ミニパソコン 送料無料価格:48117円(税別、送料別)(2022/8/6時点)楽天で購入
2022.08.01
コメント(0)
テレビのニュースで知りました。日本の1週間の感染確認者数が世界1だったそうです。「えっ、そうなの!」。ということで、週に一度データを更新している自作のダッシュボードを確認してみました。このダッシュボードは、ページを作り過ぎて、データ更新しても全ページ確認するようなことはしていません。確かに、日々の新規感染確認者数の国別ランキンググラフを見ると、7月23日の新規感染確認者数は日本が20万人で圧倒的に1位です。アメリカの10倍です。なお、あくまでも感染確認者数なので、日本の検査数が多いということなのかもしれません。アメリカの場合は、累計の感染確認者数が1億人に迫っており、自然免疫状態になってきているのかもしれません。【訳あり品】MINISFORUM EliteMini UM350 ストレージ512GB ミニPC AMD Ryzen5 3550H搭載 超小型デスクトップパソコン UM350-8/512-W10Pro(3550H) メモリ8GB Windows 10 Pro ミニスフォーラム MiniPC ミニパソコン 送料無料価格:48117円(税別、送料別)(2022/8/6時点)楽天で購入
2022.07.30
コメント(0)
日本の感染確認者数は、7月に急増しました。第6波の月別の感染確認者数の推移を見ると、3カ月くらいは感染確認者数が多い状態が続いています。とりあえず、8月、9月は感染確認者数が多い状態が続くのではないでしょうか。
2022.07.25
コメント(0)
国立感染症研究所の研究によると、新型コロナの「直接の影響」によるものか、「間接的な影響」によるものかは不明ですが、この2年間は死亡者数が多いのではないか、ということだそうです。死亡者数が多い傾向にある、ということはわかるようです。しかし、その理由は何なのでしょうか。病院の受診控えとか、他の病気への対応遅れとか、理由はいろいろと考えられるようですが、正確な理由はわからないようです。
2022.07.23
コメント(0)
昨年末に、「業界初」のクラウド録画可能なTVチューナー「Xit Base」がピクセラから発売されていたのを知りました。Xit BaseはHDMI搭載のタイプで、HDMIなしのワイヤレス視聴のみのタイプもあります。ピクセラ、業界初のクラウドストレージに録画できるTVチューナ - PC Watch(https://pc.watch.impress.co.jp/docs/news/1367134.html)クラウド録画で失われる番組ゼロへ。新時代のテレビチューナーXit Base|マクアケ - アタラシイものや体験の応援購入サービス( https://www.makuake.com/project/xit_base/)↑モノリスのような外観確かに、クラウドストレージへの直接録画はこれまでなかったと思います。ネット回線の速度は不安定であるという問題があるでしょうから、メモリに録画しながらクラウドストレージにアップロードするような仕組みでしょうか?懸念点としては、クラウドストレージの転送速度もあります。多くのクラウドストレージサービスの転送速度は「アップロードもダウンロードも遅い」というのが現実です。クラウドに録画したファイルの転送では、クラウドストレージの転送速度、ネット回線速度の二つのハードルがありますが、支障なく録画や視聴ができるのでしょうか。多くのクラウドストレージは、長時間の動画の保存場所としては実用的ではない、と思いますが、ピクセラのクラウドストレージは快適な転送速度がある、ということなのでしょうか。まあ、無圧縮の録画ファイルだと厳しいでしょうから、ビットレートを抑えた圧縮録画ファイルを前提としているのでしょう。画質は、720Pでしょうか。あるいは、クラウド側にチューナーがあるということでしょうか。でも、それだと、ローカル番組の場合の問題があります。というか、その仕組みであれば、家にチューナーを置く必要はないことになります。費用的には、クラウドストレージよりもRAIDを設定したNASと組みあわせて利用できるようにするほうがよさそうですが。NASに直接録画可能な、アイ・オー・データのネットワークチューナーのほうが実用的だと思います。NAS直接録画対応のネットワークチューナ「GV-NTX1」を試す - AV Watch https://av.watch.impress.co.jp/docs/topic/sp/751121.htmlしかし、「業界外」かもしれませんが、クラウドストレージへの録画ファイルの保存というのはありました。かつて、アニメロッカーは、Amazon Cloud Driveの容量無制限プラン「Unlimitedストレージ」があった当時、Amazon Cloud Driveに録画ファイルをコピーする機能を追加していました。プレスリリース:ネットワークストレージサービス「Amazon Cloud Drive」を統合したfoltia ANIME LOCKER 4.5 [unlimited movie works]発表 |foltia ANIME LOCKER(https://foltia.com/ANILOC/support/releasenote/pressrelease20160721.html)アマゾンの無制限プランは、あっと言う間になくなってしまいましたが・・・。もっとも、録画ファイルの容量は大きいため、転送速度が遅いクラウドにコピーするには無茶苦茶長時間かかります。無制限プランでの録画ファイルコピーは実用的でなかったと思います。そういえば、WAVECASTというものもあります。世界中どこにいても、日本のテレビやレンタルビデオがネットで楽しめる WAVECAST(https://wavecast.jp/index.php)「YouTube TV」など、アメリカのテレビ視聴サービスでは、チューナーなしでクラウド録画できるサービスがあるのに比べると、日本は遅れている、というか異次元の世界なのではないでしょうか。B-CASカードがあるくらいですから、完全なクラウド録画サービスがないのは、技術的問題よりも利権の問題が大きいのだと思いますが。実は、Xit Baseのようなチューナーの最大のメリットは「節電」なのではないでしょうか。Xit Baseの消費電力は最大12Wです。通常の利用であれば10W前後でしょうから、スマホやタブレットで視聴すれば、合計で15W前後~20W未満となるでしょう。大画面テレビは100Wを超えるものが多いので、Xit Baseとタブレットでの視聴であれば、100W以上消費電力を減らすことが可能でしょう。テレビをオンにしている時間が長い場合は、かなりの節電になります。個人的には、ニュースや情報番組、バラエティなどは大画面で見る必要はなく、スマホ・タブレットの視聴で十分だと思います。ただし、耐久性がどうかという問題はあります。その点、元ソニー、現バファローのnasneのほうが少し安心感がありそうです。視聴アプリの性能も高そうです。以前、ピクセラのiOS端末用ネットワークチューナーを利用したことがありますが、3年ももちませんでした。最低でも5~6年は使えないと困りますね。ピクセラは、かつてデジカメ用の画像編集ソフトのバンドルで儲けた会社ですが、デジカメ自体の市場が縮小し、パソコン用テレビチューナー市場も縮小。利益がでにくい会社の体質のためなのか、最近の製品の品質は高品質とは言えないようです。まあ、どこのメーカーもそういうところはあると思いますが。デスクトップパソコンでピクセラ製の内蔵TVチューナーを利用しているので、ピクセラには頑張ってほしいと思います。Macでも視聴できるという点はユニークですが、それが不要であれば、視聴アプリの性能などからしてもnasneのほうがずっとよさそうです。あと、クラウド録画といっても、別にクラウドとスマホなどの視聴端末が直でつながるわけではなく、外出時の視聴も自宅内のチューナーにアクセスする仕様で、90日以内の視聴端末とチューナーの自宅内での再接続ペアリングのルールもあります。クラウド録画と言いながら、いかにも中途半端です。クラウド側でファイルのバックアップがされている、ということ以外のメリットはなさそうです。クラウドのサーバーの負荷を減らすためか、録画ファイルの視聴時間制限もあります。やはり、RAIDを組んだNASに録画ファイルを保存できるようになったほうがメリットは大きいと思います。クラウドストレージの1TBのプランだと2年分の料金で2TBくらいのRAID設定のNASが買えそうです。2012年12月発売のワイヤレスチューナー「PIX-BR320」はスマホなどの視聴端末の90日以内ペアリングというルール外なので、VPN接続による海外からの視聴に利用できます。実は、「PIX-BR320」のほうが、海外からの視聴という「機能」では圧倒的に高性能ということになります。やはり、ペアリングとかは無関係の、「業界外」のアニメ・ロッカーやWAVECASTが最強なのではないでしょうか。もっとも、アニメ・ロッカーはデスクトップパソコンでの運用になるので、消費電力が大きいという欠点はあります。インストールするパソコンを選ぶことは可能ですが、ネットワークチューナーの省エネ性とは比較にならないでしょう。小型のカスタムPCであるWAVECASTは消費電力が少なく、VPNサーバー機能もあるようなので、総合的には最強なのかもしれません。海外などからの地デジの視聴では、「業界内」のnasneより、WAVECASTのほうがずっと実用的であることは確実です。
2022.07.23
コメント(0)
下記の手続きで、計15000マイナポイントがもらえるということで、申し込みをしました。1.健康保険証としての利用申込み2.公金受取口座の登録私のスマホ、Galaxy A7はマイナンバーカードの読み取りに非対応なため、マイナポイントの申込はパソコンで行うことにしました。アニメロッカーでの録画でカードリーダーが必要なため、カードリーダーは家に4個ありますし。カードリーダーの種類としては3種類あります。健康保険証としての利用申込みと公金受取口座の登録は簡単にできました。しかし、「マイキーID作成・登録準備ソフト」のインストーラーに重大な問題がありました。ネットで調べると、やはりインストールできないケースはあるようで、環境変数の設定変更で何とかなったという話もありました。最初は、インストールがいつまで経っても完了しないという症状でした。タスクマネジャーから強制終了後、2回目のインストールからは「インストールが完了する前に処理が中止されました」というメッセージが出るようになりました。確かに、処理は中止しましたが、それは処理が完了しなかったからです。なお、2台目にインストールを試したWindows 8.1のパソコンの場合は、最初から「「インストールが完了する前に処理が中止されました」」というメッセージで、インストールできませんでした結局、私のPCの場合は、環境変数を変更してみてもインストールできませんでした。いろいろと調べて、いろいろと試したので、マイナポイント分に相当するような作業をしてしまった感があります。「いったい、どないなってんねん。責任者でてこい!」と問い合わせようとも思いましたが、そんなことをしても時間の無駄です。Windows 10のPC、Windows 8.1のPC、いずれも同じエラーが出てインストール不可でした。いずれもSSDを換装したもので、そのことが影響しているのかもしれません。上記の2台のPCで、アプリのインストールでエラーが出ることはなかったので、マイナキーIDのソフトには問題があると言わざるを得ません。「マイキーID作成・登録準備ソフト」自体は、バージョンアップ用のようで、2020年のマイナポイント申込時の前バージョンはインストールできていたはずなのに不思議です。インストールできないという話は、2020年当時のものがネット上で確認できるので、以前から問題があったということが分かります。何という会社が作成したアプリなのでしょうか。政府のDXの現状って大丈夫でしょうか。インストーラーの改修をしないのであれば、インストールエラーが生じる場合があることとその理由・原因を公表してもらいたいものです。最終的には、SSDの換装をしていない3台目のWindows 10のPCでインストールが成功し、マイナキーIDと電子マネーとの紐づけに成功しました。
2022.07.20
コメント(0)
日本の感染確認者数が急速に増加しています。第7波到来は確実のようですが、有症状者数はどれくらいなのでしょうか。感染確認者の中には無症状者も多くいるはずです。インフルエンザなどの場合は、症状の有る人しか検査しないのに対して、新型コロナの場合は、無症状でも検査をするので、「感染確認者(陽性者)」が多くなっているはずです。感染確認者(陽性者)数だけでなく、無症状者数、有症状者数が分かるようにすべきでしょう。なお、東京都の入院患者数の推移のグラフを見ると、入院患者数は増えています。有症状者数も増えているということなのでしょう。もはや、検査による感染確認者の隔離、という対応が正解とは言えなくなってきています。インフルエンザ並みの扱いにしていくのであれば、とりあえず、無症状の人は検査しないようにしてもらいたいものです。インフルエンザの場合は、無症状で検査することはなかったわけですから。検査が必要、ということであれば、各世帯に抗原検査キットを配布して、自宅でいつでも簡易検査ができるようにしておくのがいいのではないでしょうか。無症状でも、元気でも、他の人に感染させる可能性がある、あるいは無症状の人からも感染する、といったことを念頭に行動するしかないのではないでしょうか。
2022.07.17
コメント(0)
しばらく前から、ラジオ番組のダイジェスト版のポッドキャストをよく聴いています。そもそも、ポッドキャストとは、音声や動画をネット上に手軽に公開できる仕組みだそうで、ブログの音声・動画版ということのようです。ポッドキャスト自体は、iPodでもよく利用されていたはずで、かなり古くからあるわけですが、ほとんど利用していませんでした。個人のポッドキャストもあるわけですが、ラジオ局などのものを利用することが多いのではないでしょうか。ただし、ラジオ局のポッドキャストの場合は、大人の事情で、ほぼ楽曲はないので、トーク番組などが中心です。ニュースやニュース解説番組などをよく利用しています。そのほか、「教養」「語学」などのジャンルのものもあるので、かなり楽しめます。ラジオ番組のダイジェスト版のポッドキャストの場合、番組自体をラジコのタイムフリーで聴く方法もありますが、ラジコのタイムフリーの場合、1週間という期限があります。ポッドキャストの場合は、古いものも聴くことができます。また、ラジコのエリア外のラジオ局の番組もポッドキャストであれば聴くことができます。2020年9月からAmazon Musicでポッドキャストが利用できるようになっていて、ポッドキャストは手軽に利用できます。Spotifyでも利用できます。アマゾンのスマートスピーカーのecho showでもAmazon Musicのポッドキャストを聴くことができるので、結構便利です。「アレクサ、Amazon Musicで [ポッドキャスト番組名] のポッドキャストをかけて」と呼びかければ通じるように設定できます。ただし、古いエピソードを聴きたい場合は、指定するのが面倒なので、スマートスピーカーは向いていません。2つ前とか3つ前とかならほぼ問題ないですが、15個前とか20個前とかだと誤認識もあったりして無理そうです。なお、ニッポン放送の「飯田浩司のOK! Cozy up!」は独自のアレクサスキルもあります。echo showでAppleのポッドキャストは利用できなかったのですが、アレクサのスキルとしてはAppleのポッドキャストのスキルが存在しています。利用できないスキルは表示させないでもらいたいものです。なお、パソコン用のAlexaアプリもありますが、Amazon Musicでポッドキャストのエピソード選択とかは、マウスとキーボードで操作したほうが速いので、パソコン用のAlexaアプリの中途半端感が半端ないです。Alexaのスキルでいうと、ラジコのラジオ局の選択やタイムフリー対応がほしいところです。例えば、定型アクションで、指定時刻にラジコをオンにできますが、ラジオ局は直前に聴いていた局になります。定型アクションで、指定時刻に指定ラジオ局がオンになるといいのに、と思います。BBCなど、海外のラジオ局であれば、Tuneinを使って指定の定型アクションを作成できるのですが・・・。なお、下記のページで知ったのですが、アニメ・ロッカーでの録画番組や録音番組をスマホのポッドキャストのクライアントアプリで利用することができます。キーワード録画のものに限られるのですが、「録画一覧」のページで、当該キーワードの録画・録音番組を表示させます。その状態で、「このキーワードのFolcast」の表示を長押ししてURLをコピーします。スマホのポッドキャストのクライアントアプリのRSSの設定のところにコピーしたURLを貼りつけると登録完了です。当該キーワードの録画・録音番組のリスト(RSS)が更新されていくので、とても便利です。アニメ・ロッカーが録画・録音番組ごとのポッドキャストのサーバーになるイメージです。なお、Folcastの機能を活用するには、キーワード録画で録画してある必要があります。EPG録画の場合は、すべての録画番組が対象になってしまうので、全録画番組リストになってしまいます。foltia+podcast=folcast - aikider
2022.07.16
コメント(0)
Windows 10のパソコンの「スマートフォン連携」というアプリで、Android スマホとパソコンを連携すると、Bluetooth接続でパソコンで電話ができるようになります。なお、電話をする場合はパソコンの「集中モード」の設定を「オフ」にします。パソコンとスマホの連携自体は、同一のWi-Fiへの接続を必要としますが、通話はBluetooth接続を利用します。パソコンがスマホのヘッドセットになるようなイメージでしょうか。スマホのメッセージのやり取りもパソコンでできます。そのほか、スマホの写真をパソコンで閲覧、コピーできたり、スマホの通知をパソコンで閲覧できたりします。リモート会議用のヘッドセットを使えば、パソコンで電話をかけるのも快適です。ただし、スマホは楽天モバイルですが、Rakuten Linkアプリを利用できず、有料の「電話」アプリになります。そういえば、Rakuten Linkアプリのパソコン版があれば、「スマートフォン連携」アプリを使わなくても、パソコンでスマホのRakuten Linkアプリと連携して通話ができるはずです。もちろん、Rakuten Linkなので、通話料無料のはずです。しかし、Rakuten Linkアプリのパソコン版は、2020年10月リリースと発表されてから、いまだにリリースされていない状況です。技術的な理由なのか、営業上の理由なのか、どちらでしょうか。2年以上経過しているので、営業上の理由なのではないかと思いますが。技術力の問題だとすると、「スマートフォン連携」アプリが実現できていることができていない、というのは残念な技術力ということになります。マイクロソフトから人材を引き抜いてでもリリースしてほしいです。最新情報では、2022年内という目標らしいですが、これまでの経緯から信用できません。2020年10月リリースを公表しておきながら、一体、どうなっているのでしょうか。スマホが通話し放題の契約であれば別ですが、結局、パソコンで電話する場合は、Skypeとかを利用するのが良いのかもしれません。「スマートフォン連携」は、同一のWi-Fiネットワークに接続しているパソコンとスマホを連携するものです。なお、「スマートフォン連携」は、スマホにもアプリをインストールし、マイクロソフトアカウントを利用します。設定はやや煩雑ですが、それほど難しくはありませんでした。
2022.07.16
コメント(0)
日本では、感染確認者数が急増し始めました。実効再生産数Rtは1.64です。どうやら、第7波が到来したようです。感染拡大は7月中は続きそうです。8月まで続くのでしょうか。何らかの対策はなされるのでしょうか。あるいは、今後は、何も対策しないようにするのでしょうか。弱毒性であれば、特に対策はないのかもしれません。
2022.07.10
コメント(0)
日本に第7波が到来するのでしょうか。日本の実効再生産数Rtが1を超えてきました。冷房の効いた室内で、換気が不十分だと、感染が広がりやすいのかもしれません。また、感染確認者数が増えると、無症状の人で検査を受ける人も増えるようなので、なおさら感染確認者数が増えるという構図があるようにも思えます。不幸中のWi-Fi■面白Tシャツ■綿100%■サイズ S〜4L■ホワイト/ブラック/レッド/ブルー■面白いTシャツ■おもしろTシャツ■大きいサイズ■半袖価格:2200円(税別、送料別)(2022/7/5時点)楽天で購入
2022.07.03
コメント(0)
新型コロナによる6月の台湾での月間死亡者数は約4000人です。日本で最も死亡者数が多かった月とあまり変わらない数です。台湾の人口は約2,340万人ということですから、人口比でははるかに台湾での死亡者数が多くなっています。台湾では、ワクチン接種が遅れていたということでしょうか。日本での死亡者数の減少のスピードは緩やかでしたが、台湾でも同じような減り方になるとすれば、7月の死亡者数もかなり多くなる可能性が高そうです。
2022.06.28
コメント(0)
「ディスカバー・カーペンターズ」というラジオ番組が4月に始まっていました。今日、初めて知りました・・・毎週、日曜日の午後にNHKの第一放送で放送されています。1年間続くということなので、来年の3月まででしょうか。とりあえず、明日の放送を聴いてみたいと思います。Anime Lockerで録音の予約をしました。キーワード予約なので、毎週自動で録音されるはずです。先週の6月19日の放送分は能登地方の地震があったため、7月2日に放送されるそうです。
2022.06.25
コメント(0)
台湾での感染確認者数の峠は越えたようですが、しばらく日々の死亡者数は多いまま推移しそうです。日本、韓国の月間死亡者数の推移からすると、死亡者数の減少ペースは緩やかなので、台湾の7月の死亡者数はかなり多くなりそうです。なお、中国の場合は死亡者数の減少ペースが速かったようです。
2022.06.21
コメント(0)
hp MicroserverにWindows 8.1を入れてファイルサーバーとして利用していますが、時々、勝手に電源がOFFになってしまいます。リモートデスクトップ接続での利用が主なので、リモートデスクトップ接続ができないことに気付いた時に電源ボタンを入れ直しに行くのですが、できればリモートから電源を入れられた方が楽です。外出先からも電源のON、OFFができた方が便利です。シャットダウンはリモートデスクトップのコマンドで可能ですが、電源ONはリモートからはできません。そういえば、hp Microserver購入時に比較的安価だったので合わせて購入していたリモートアクセスカードのことを思い出しました。というか、リモートアクセスカードは取り付け済みでしたが使っていませんでした。リモートアクセスカードにLANケーブルを挿して、リモートアクセスカードに設定したIPアドレスにブラウザでアクセスするだけで、電源のON、OFFがリモートで可能になります。リモートアクセスカードは常に待機電力を消費しているわけですが、サーバーを利用する時だけ電源をONにすれば節電になると思います。リモートアクセスカードによって、電源のON、OFFが外出先からもできるようになりました。電車の中から電源をONにできた時は少し感動しました。とても便利です。電源がONになってさえいれば、リモートデスクトップ接続することができます。KVM機能が使えないのですが、使えるようにするためには、Javaのバージョンダウンなどが必要なようで、設定も難しそうです。なお、シャットダウンする場合は、リモートデスクトップ接続のコマンドプロンプトの画面で shutdown /s のコマンドでシャットダウンします。とりあえず、リモートデスクトップ接続したい時に、リモートデスクトップ接続ができなくなる、ということはなくなりました。主に録画ファイルのバックアップ用のファイルサーバーとして利用していて、24時間稼働させる必要はなく、使いたい時だけ電源をONにする使い方で支障はありません。
2022.06.20
コメント(0)
台湾では、5月から感染確認者数が急増しています。ただ、感染確認者数のピークは過ぎているようにも見えます。感染確認者数の増加直後から死亡者数が急増しているので、医療機関がひっ迫しているのかもしれません。あるいは、コロナ以外の原因での死亡者がコロナに感染していた、ということなのでしょうか。台湾の1日あたりの感染確認者数や死亡者数が世界で1番になっているということが、日本国内のニュースではあまり報じられていないのではないでしょうか。ダッシュボードの折れ線グラフや棒グラフの日付範囲(横軸の表示件数)が上限にきていたので、古いデータを表示対象外に設定し直しています。まだ、すべてのページの設定修正が終わっていませんが、データを見て、台湾が大変なことになっていることに気づきました。
2022.06.12
コメント(0)
日本国内の感染確認者数の減少が続いています。感染確認者数は少ないとは言えないかもしれませんが、第6波は終息に向かっています。死亡者数は、1日あたり20~30人という状態が続いています。昨年の11月、12月の水準と比べるとかなり多いと言えます。
2022.06.05
コメント(0)
Windows パソコンでブルーレイレコーダーの録画ファイルやライブ配信を視聴するには、DTCP-IPに対応したソフトウェアが必要です。そのようなソフトウェアとしてはDiXiMプレーヤーが有名ですが、もし、DVDやブルーレイの再生用としてPowerDVDを持っていれば、DiXiMプレーヤーは不要かもしれません。私は、Windows 10のパソコンでPowerDVD 14(最新版は22)を使っていますが、PowerDVDのDLNAクライアント機能で、ブルーレイレコーダーのテレビ放送のリアルタイム視聴をしています。名前がPowerDVDなのでDVDやブルーレイ再生専用だと思いがちですが、DTCP-IP対応のDLNAクライアント機能もあるので、利用範囲は広いと言えます。DTCP-IP対応ということは、nasneでも視聴に使えると思います。そういえば、バッファロー公式ストアが楽天市場にオープンしました。nasneに限らず、最近のブルーレイレコーダーは、ネットワーク経由でスマホ・タブレット・パソコンで視聴できるものがほとんどなので、テレビだけで利用するのはもったいないです。まあ、foltia Anime Lockerを利用すれば、DTCP-IPとは無縁でいられますが、ライブ視聴は録画サーバーのCPUに負荷がかかるので、ブルーレイレコーダーを使った方が省エネです。バッファロー nasne HDDレコーダー 2TB テレビ 録画 地デジ BS CS チューナー torne ニコニコ実況 【 PS5 PS4 iPhone iPad Android Windows 対応 】 NS-N100価格:29800円(税別、送料別)(2022/6/6時点)楽天で購入
2022.06.04
コメント(0)
日本の感染確認者数は、緩やかに減少しています。しかし、グラフから月間の感染確認者数は結構多いことがわかります。死亡者数の減少も緩やかで、5月の月間死亡者数は約1000人になっています。月間の死亡者数の水準はそれほど低い水準ではありませんが、話題にはなっていません。なお、累積の感染確認者数と累積の死亡者数から算出した死亡率は0.35です。捕捉されていない感染確認者数はもっと多いでしょうから、実際の死亡率はもっと低いはずです。
2022.05.30
コメント(0)
今日は、日本の各地で、30℃超えの暑い日でした。Ventuskyで14時の広域の気温を見てみたところ、インド北部やパキスタンでは40℃を超えている地域があります。インドの南部よりも北部の方が気温が高くなっています。
2022.05.29
コメント(0)
BBCラジオには放送された番組のアーカイブ(エピソード)があります。「エピソード」を高速録音するのは簡単でした。なお、「エピソード」によっては、著作権の関係で利用できないものもあります。「録音」というより、ファイルのダウンロードの形になります。ダウンロードには、「うえぶれこ」というアプリを使用します。まず、保存したいエピソードを再生、停止し、URLをコピーしておきます。次に、「うえぶれこ」の「URLでダウンロード」という画面で、URL入力欄に保存したいエピソードのURLを貼りつけます。「音声のダウンロード」を選択するとダウンロードが始まります。ダウンロード終了後は、「ライブラリ」の画面から再生することができます。↓保存したい番組のURLをコピーする↓「うえぶれこ」にコピーしたURLを貼りつける。後は、操作ボタンをクリックしていくだけ。
2022.05.24
コメント(0)
全1040件 (1040件中 51-100件目)