Step 6: Create the overrides

Specify configuration overrides

The Apigee hybrid installer uses defaults for many settings. However, there are a few settings that do not have defaults. You must provide values for these settings, as explained next.

Before you begin

We recommend you review the following scenarios to determine if you want to configure your cluster for them. These configurations are optional.

If you are planning on installing hybrid in multiple regions, read Multi-region deployment before continuing.
Apigee hybrid provides default passwords for the Cassandra users. Apigee recommends changing the default user passwords. See Configuring TLS for Cassandra for details.
If you want to configure the storage and heap settings for Cassandra, see Configure storage and heap settings .
As described in Part 1: Project and Org setup--Step 1: Enable APIs , For production installation scenarios, configure persistent solid state disk (SSD) storage for Cassandra. Apigee does not support using local SSDs for Apigee hybrid. For details, see Add SSD storage for production deployments .

Configure the cluster

By convention, configuration overrides are written in a file named overrides.yaml typically stored in your $APIGEE_HELM_CHARTS_HOME directory.

Note: The overrides.yaml file will be used during upgrades, expansions and anytime you need to alter the configuration of your hybrid runtime installation. Apigee recommends you store this file in a source control repository with version control.

Create a new file named overrides.yaml in your $APIGEE_HELM_CHARTS_HOME directory.
The overrides.yaml provides the configuration for your unique Apigee hybrid installation. The overrides file in this step provides a basic configuration for a small-footprint hybrid runtime installation, suitable for your first installation.

In overrides.yaml , add the required property values, shown below. A detailed description of each property is provided below.

Select the tab for your installation, production, Production or non-production (demo, evaluation, or proof-of-concept installations), Non-prod depending on your choice in Step 4: Create service accounts .

For installations in production environments, look at the storage requirements for the Cassandra database in Configure Cassandra for production .

If you are installing Apigee hybrid on GKE and you plan to use Workload Identity to authenticate hybrid components, select either the Prod: Workload Identity or Non-prod: Workload Identity tab to configure your overrides.yaml file.

Production

Make sure the overrides .yaml file has the following structure and syntax. Values in red, bold italics are property values that you must provide. You can edit their values on this page. They are described in the table below .

There are differences between the different platforms for the Google Cloud project region and Kubernetes cluster region. Choose the platform where you are installing Apigee hybrid.

instanceID: " UNIQUE_INSTANCE_IDENTIFIER 
"
namespace: APIGEE_NAMESPACE 
# Usually "apigee"

gcp:
  projectID: PROJECT_ID 
region: ANALYTICS_REGION 
k8sCluster:
  name: CLUSTER_NAME 
region: CLUSTER_LOCATION 
# Must be the closest Google Cloud region to your cluster.
org: ORG_NAME 
# Required if using Data residency 
:
contractProvider: https:// CONTROL_PLANE_LOCATION 
-apigee.googleapis.com
  

envs:
- name: ENVIRONMENT_NAME 
serviceAccountPaths:
    # Provide the path relative to the apigee-env chart directory.
    synchronizer: SYNCHRONIZER_SERVICE_ACCOUNT_FILEPATH 
# For example: " PROJECT_ID 
-apigee-synchronizer.json"
    runtime: RUNTIME_SERVICE_ACCOUNT_FILEPATH 
# For example: " PROJECT_ID 
-apigee-runtime.json"
    udca: UDCA_SERVICE_ACCOUNT_FILEPATH 
# For example: "PROJECT_ID-apigee-udca.json"
components:
      runtime:
        replicaCountMin: 2 # minimum for Prod
        replicaCountMax: 4 # minimum for Prod

cassandra:
  hostNetwork: false 
# Set to  false 
 
for single region installations and multi-region installations
    # with connectivity between pods in different clusters, for example GKE installations.
    # Set to  true 
 
for multi-region installations with no communication between
    # pods in different clusters, for example Google Distributed Cloud on VMware or bare metal, GKE on AWS,
    # AKS, EKS, and OpenShift installations.
    # See Multi-region deployment: Prerequisites 
replicaCount: 3 
# Use multiples of 3 for production.
    # See Configure Cassandra for production 
for guidelines.
  storage:
    capacity: 500Gi
  resources:
    requests:
      cpu: 7
      memory: 15Gi
  maxHeapSize: 8192M
  heapNewSize: 1200M
    # Minimum storage requirements for a production environment.
    # See Configure Cassandra for production 
.

ingressGateways:
- name: INGRESS_NAME 
# maximum 17 characters.
  replicaCountMin: 2
  replicaCountMax: 10
  svcAnnotations:  # optional. If you are on AKS, see Known issue #260772383 
 SVC_ANNOTATIONS_KEY 
: SVC_ANNOTATIONS_VALUE 
virtualhosts:
- name: ENVIRONMENT_GROUP_NAME 
selector:
    app: apigee-ingressgateway
    ingress_name: INGRESS_NAME 
sslCertPath: PATH_TO_CERT_FILE 
sslKeyPath: PATH_TO_KEY_FILE 
mart:
  serviceAccountPath: MART_SERVICE_ACCOUNT_FILEPATH 
# Provide the path relative to the apigee-org chart directory.
    # For example: " PROJECT_ID 
 -apigee-mart.json 
"

connectAgent:
  serviceAccountPath: MART_SERVICE_ACCOUNT_FILEPATH 
# Use the same service account for mart and connectAgent 
# Provide the path relative to the apigee-org chart directory.
    # For example: " PROJECT_ID 
 -apigee-mart.json 
"

logger:
  enabled: true 
# enabled by default
    # See apigee-logger 
in Service accounts and roles used by hybrid components 
.
  serviceAccountPath: LOGGER_SERVICE_ACCOUNT_FILEPATH 
# Provide the path relative to the apigee-telemetry directory.
    # For example: " PROJECT_ID 
 -apigee-logger.json 
"

metrics:
  serviceAccountPath: METRICS_SERVICE_ACCOUNT_FILEPATH 
# Provide the path relative to the apigee-telemetry chart directory.
    # For example: " PROJECT_ID 
 -apigee-metrics.json 
"

udca:
  serviceAccountPath: UDCA_SERVICE_ACCOUNT_FILEPATH 
# Provide the path relative to the apigee-org chart directory.
    # For example: " PROJECT_ID 
 -apigee-udca.json 
"

watcher:
  serviceAccountPath: WATCHER_SERVICE_ACCOUNT_FILEPATH 
# Provide the path relative to the apigee-org chart directory.
    # For example: " PROJECT_ID 
 -apigee-watcher.json 
"

Non-prod

There are differences between the different platforms for the Google Cloud project region and Kubernetes cluster region. Choose the platform where you are installing Apigee hybrid.

instanceID: " UNIQUE_INSTANCE_IDENTIFIER 
"
namespace: APIGEE_NAMESPACE 
# Usually "apigee"

gcp:
  projectID: PROJECT_ID 
region: ANALYTICS_REGION 
k8sCluster:
  name: CLUSTER_NAME 
region: CLUSTER_LOCATION 
# Must be the closest Google Cloud region to your cluster.
org: ORG_NAME 
# Required if using Data residency 
:
contractProvider: https:// CONTROL_PLANE_LOCATION 
-apigee.googleapis.com
  

envs:
- name: ENVIRONMENT_NAME 
serviceAccountPaths:
    # Provide the path relative to the apigee-env chart directory.
    synchronizer: NON_PROD_SERVICE_ACCOUNT_FILEPATH 
# For example: " PROJECT_ID 
 -apigee-non-prod.json 
"
    runtime: NON_PROD_SERVICE_ACCOUNT_FILEPATH 
# For example: " PROJECT_ID 
 -apigee-non-prod.json 
"
    udca: NON_PROD_SERVICE_ACCOUNT_FILEPATH 
# For example: " PROJECT_ID 
 -apigee-non-prod.json 
"

cassandra:
  hostNetwork: false 
# Set to  false 
 
for single region installations and multi-region installations
    # with connectivity between pods in different clusters, for example GKE installations.
    # Set to  true 
 
for multi-region installations with no communication between
    # pods in different clusters, for example Google Distributed Cloud on VMware or bare metal, GKE on AWS,
    # AKS, EKS, and OpenShift installations.
    # See Multi-region deployment: Prerequisites 
replicaCount: 1 
# Use 1 for non-prod or "demo" installations and multiples of 3 for production.
    # See Configure Cassandra for production 
for guidelines.

ingressGateways:
- name: INGRESS_NAME 
# maximum 17 characters.
  replicaCountMin: 2
  replicaCountMax: 10
  svcAnnotations:  # optional. If you are on AKS, see Known issue #260772383 
 SVC_ANNOTATIONS_KEY 
: SVC_ANNOTATIONS_VALUE 
virtualhosts:
- name: ENVIRONMENT_GROUP_NAME 
selector:
    app: apigee-ingressgateway
    ingress_name: INGRESS_NAME 
sslCertPath: PATH_TO_CERT_FILE 
sslKeyPath: PATH_TO_KEY_FILE 
mart:
  serviceAccountPath: NON_PROD_SERVICE_ACCOUNT_FILEPATH 
# Provide the path relative to the chart directory.
  # For example: " PROJECT_ID 
 -apigee-non-prod.json 
"

connectAgent:
  serviceAccountPath: NON_PROD_SERVICE_ACCOUNT_FILEPATH 
# Provide the path relative to the apigee-org chart directory.
  # Use the same service account for mart and connectAgent 
# For example: " PROJECT_ID 
 -apigee-non-prod.json 
"

logger:
  enabled: true 
# enabled by default
    # See apigee-logger 
in Service accounts and roles used by hybrid components 
.
  serviceAccountPath: NON_PROD_SERVICE_ACCOUNT_FILEPATH 
# Provide the path relative to the apigee-telemetry chart directory.
    # For example: " PROJECT_ID 
 -apigee-non-prod.json 
"

metrics:
  serviceAccountPath: NON_PROD_SERVICE_ACCOUNT_FILEPATH 
# Provide the path relative to the apigee-telemetry chart directory.
    # For example: " PROJECT_ID 
 -apigee-non-prod.json 
"

udca:
  serviceAccountPath: NON_PROD_SERVICE_ACCOUNT_FILEPATH 
# Provide the path relative to the apigee-org chart directory.
    # For example: " PROJECT_ID 
 -apigee-non-prod.json 
"

watcher:
  serviceAccountPath: NON_PROD_SERVICE_ACCOUNT_FILEPATH 
# Provide the path relative to the apigee-org chart directory.
    # For example: " PROJECT_ID 
 -apigee-non-prod.json 
"

Prod: Workload Identity

This template is for Production installations on GKE using Workload Identity. Make sure the overrides.yaml file has the following structure and syntax. Values in red, bold italics are property values that you must provide. You can edit their values on this page. They are described in the table below .

If you are installing Apigee hybrid on GKE , you have an alternative to authenticate and make requests to Google APIs, Workload Identity . For overviews of Workload Identity, see:

To use Workload Identity with Apigee hybrid on GKE, use this template and then follow the steps in Step 11: Install Apigee hybrid using Helm charts to create the Kubernetes service accounts and associate them with the Google service accounts you created in Step 4: Create service accounts .

instanceID: " UNIQUE_INSTANCE_IDENTIFIER 
"
namespace: APIGEE_NAMESPACE 
# Usually "apigee"

gcp:
  projectID: PROJECT_ID 
region: ANALYTICS_REGION 
workloadIdentity:
    enabled: true

k8sCluster:
  name: CLUSTER_NAME 
region: CLUSTER_LOCATION 
# Must be the closest Google Cloud region to your cluster.
org: ORG_NAME 
# Required if using Data residency 
:
contractProvider: https:// CONTROL_PLANE_LOCATION 
-apigee.googleapis.com
  

envs:
- name: ENVIRONMENT_NAME 
gsa:
    synchronizer: " SYNCHRONIZER_SERVICE_ACCOUNT_EMAIL 
"
    # For example: "apigee-synchronizer@ PROJECT_ID 
.iam.gserviceaccount.com"
    runtime: " RUNTIME_SERVICE_ACCOUNT_EMAIL 
"
    # For example: "apigee-runtime@ PROJECT_ID 
.iam.gserviceaccount.com"
    udca: " UDCA_SERVICE_ACCOUNT_EMAIL 
"
    # For example: "apigee-udca@ PROJECT_ID 
.iam.gserviceaccount.com"
  components:
    runtime: 
      replicaCountMin: 2 # minimum for Prod 
      replicaCountMax: 4 # minimum for Prod
cassandra:
  hostNetwork: false 
# Set to  false 
 
for single region installations and multi-region installations
    # with connectivity between pods in different clusters, for example GKE installations.
    # Set to  true 
 
for multi-region installations with no communication between
    # pods in different clusters, for example Google Distributed Cloud on VMware or bare metal, GKE on AWS,
    # AKS, EKS, and OpenShift installations.
    # See Multi-region deployment: Prerequisites 
replicaCount: 3 
# Use multiples of 3 for production.
    # See Configure Cassandra for production 
for guidelines.
  storage:
    capacity: 500Gi
  resources:
    requests:
      cpu: 7
      memory: 15Gi
  maxHeapSize: 8192M
  heapNewSize: 1200M
    # Minimum storage requirements for a production environment.
    # See Configure Cassandra for production 
.
  backup:
    enabled: true
    # Set to true for initial installation.
    # This triggers the chart to create the apigee-cassandra-backup Kubernetes service account when you install it.
    # See Cassandra backup overview 
for instructions on using cassandra.backup.

ingressGateways:
- name: INGRESS_NAME 
# maximum 17 characters.
  replicaCountMin: 2
  replicaCountMax: 10
  svcAnnotations:  # optional. If you are on AKS, see Known issue #260772383 
 SVC_ANNOTATIONS_KEY 
: SVC_ANNOTATIONS_VALUE 
virtualhosts:
- name: ENVIRONMENT_GROUP_NAME 
selector:
    app: apigee-ingressgateway
    ingress_name: INGRESS_NAME 
sslCertPath: PATH_TO_CERT_FILE 
sslKeyPath: PATH_TO_KEY_FILE 
mart:
  gsa: " MART_SERVICE_ACCOUNT_EMAIL 
"
    # For example: "apigee-mart@ PROJECT_ID 
.iam.gserviceaccount.com"

connectAgent:
  gsa: " MART_SERVICE_ACCOUNT_EMAIL 
"
    # Use the same service account for mart and connectAgent 
# For example: "apigee-mart@ PROJECT_ID 
.iam.gserviceaccount.com"

logger:
  enabled: true 
# enabled by default
    # See apigee-logger 
in Service accounts and roles used by hybrid components 
.
  gsa: " LOGGER_SERVICE_ACCOUNT_EMAIL 
"
    # For example: "apigee-logger@ PROJECT_ID 
.iam.gserviceaccount.com"
metrics:
  gsa: " METRICS_SERVICE_ACCOUNT_EMAIL 
"
    # For example: "apigee-metrics@ PROJECT_ID 
.iam.gserviceaccount.com"

udca:
  gsa: " UDCA_SERVICE_ACCOUNT_EMAIL 
"
    # For example: "apigee-udca@ PROJECT_ID 
.iam.gserviceaccount.com"

watcher:
  gsa: " WATCHER_SERVICE_ACCOUNT_EMAIL 
"
    # For example: "apigee-watcher@ PROJECT_ID 
.iam.gserviceaccount.com"

Non-prod: Workload Identity

This template is for Non-Production installations on GKE using Workload Identity. Make sure the overrides.yaml file has the following structure and syntax. Values in red, bold italics are property values that you must provide. You can edit their values on this page. They are described in the table below .

If you are installing Apigee hybrid on GKE , you have an alternative to authenticate and make requests to Google APIs, Workload Identity . For overviews of Workload Identity, see:

Tip: You can find the email address of your apigee-non-prod service account with the following command:

gcloud iam service-accounts list --project ${PROJECT_ID} --filter "apigee-non-prod"

instanceID: " UNIQUE_INSTANCE_IDENTIFIER 
"
namespace: APIGEE_NAMESPACE 
# Usually "apigee"

gcp:
  projectID: PROJECT_ID 
region: ANALYTICS_REGION 
workloadIdentity:
    enabled: true
    gsa: " NON_PROD_SERVICE_ACCOUNT_EMAIL 
"
    # For example: "apigee-non-prod@ PROJECT_ID 
.iam.gserviceaccount.com"

k8sCluster:
  name: CLUSTER_NAME 
region: CLUSTER_LOCATION 
# Must be the closest Google Cloud region to your cluster.
org: ORG_NAME 
# Required if using Data residency 
:
contractProvider: https:// CONTROL_PLANE_LOCATION 
-apigee.googleapis.com

instanceID: " UNIQUE_INSTANCE_IDENTIFIER 
"

cassandra:
  hostNetwork: false 
#  false 
 
for all GKE installations.
    # See Multi-region deployment: Prerequisites 
replicaCount: 1 
# Use 1 for non-prod or "demo" installations and multiples of 3 for production.
    # See Configure Cassandra for production 
for guidelines.
  backup:
    enabled: true
    # Set to true for initial installation.
    # This triggers the chart to create the apigee-cassandra-backup Kubernetes service account when you install it.
    # See Cassandra backup overview 
for instructions on using cassandra.backup.

virtualhosts:
- name: ENVIRONMENT_GROUP_NAME 
selector:
    app: apigee-ingressgateway
    ingress_name: INGRESS_NAME 
sslCertPath: PATH_TO_CERT_FILE 
sslKeyPath: PATH_TO_KEY_FILE 
ingressGateways:
- name: INGRESS_NAME 
# maximum 17 characters.
  replicaCountMin: 2
  replicaCountMax: 10
  svcAnnotations:  # optional. If you are on AKS, see Known issue #260772383 
 SVC_ANNOTATIONS_KEY 
: SVC_ANNOTATIONS_VALUE 
svcLoadBalancerIP: SVC_LOAD_BALANCER_IP 
# optional
  

envs:
- name: ENVIRONMENT_NAME 
logger:
  enabled: false 
# Set to  false 
 
for all GKE installations.

Example

The following example shows a completed overrides file with example property values added:

instanceID: "my_hybrid_example"
namespace: apigee

gcp:
  projectID: hybrid-example
  region: us-central1

k8sCluster:
  name: apigee-hybrid
  region: us-central1

org: hybrid-example

contractProvider: https://us-apigee.googleapis.com
  

envs:
- name: test
  serviceAccountPaths:
    synchronizer:my-hybrid-project-apigee-synchronizer.json
    runtime: my-hybrid-project-apigee-runtime.json
    udca: my-hybrid-project-apigee-udca.json
    components: 
      runtime: 
        replicaCountMin: 2 
        replicaCountMax: 4
cassandra:
  hostNetwork: false
  replicaCount: 3

ingressGateways:
- name: my-ingress-1
  replicaCountMin: 2
  replicaCountMax: 10

virtualhosts:
- name: example-env-group
  selector:
    app: apigee-ingressgateway
    ingress_name: my-ingress-1
  sslCertPath: certs/keystore.pem
  sslKeyPath: certs/keystore.key

logger:
  enabled: true # Set to "false" for GKE. Set to "true" for all other Kubernetes platforms.
  serviceAccountPath: my-hybrid-project-apigee-logger.json

mart:
  serviceAccountPath: my-hybrid-project-apigee-mart.json

connectAgent:
  serviceAccountPath: my-hybrid-project-apigee-mart.json

metrics:
  serviceAccountPath: my-hybrid-project-apigee-metrics.json

udca:
  serviceAccountPath: my-hybrid-project-apigee-udca.json

watcher:
  serviceAccountPath: my-hybrid-project-apigee-watcher.json

When you are finished, save the file.

The following table describes each of the property values that you must provide in the overrides file. For more information, see Configuration property reference .

Variable

Description

UNIQUE_INSTANCE_IDENTIFIER

A unique string to identify this instance. This can be any combination of letters and numbers up to 63 characters.

Note: You can create multiple organizations in the same cluster, but the instanceID must be the same for all orgs in the same Kubernetes cluster. For multi-region installations, each region requires its own cluster (individual clusters do not span regions).

You can create multiple organizations in the same cluster, but the instanceID must be the same for all orgs in the same Kubernetes cluster.

APIGEE_NAMESPACE

The Kubernetes namespace for your Apigee hybrid components.

The default value is apigee .

ANALYTICS_REGION

In GKE, You must set this value to the same region where the cluster is running. In all other platforms, select the closest analytics region to your cluster that has Analytics support (see the table in Part 1, Step 2: Create an organization .

This is the value you assigned to the environment variable ANALYTICS_REGION previously.

PROJECT_ID

Identifies the Google Cloud project where the apigee-logger and the apigee-metrics push their data. This is the value assigned to the environment variable PROJECT_ID .

CLUSTER_NAME

Your Kubernetes cluster name. This is the value assigned to the environment variable CLUSTER_NAME .

CLUSTER_LOCATION

The region where the cluster is running. This is the region where you created the cluster in Step 1: Create a cluster .

This is the value you assigned to the environment variable CLUSTER_LOCATION previously.

If you are working with zonal clusters, you must specify the region in which your cluster was created. For example, if you created your cluster in the us-central1-a zone, specify us-central1 for the CLUSTER_LOCATION .

ORG_NAME

The ID of your Apigee hybrid organization. This is the value assigned to the environment variable ORG_NAME .

CONTROL_PLANE_LOCATION

Required if you are using Data residency with your Apigee hybrid installation. This is the location where customer core content like proxy bundles is stored. For a list see Available Apigee API control plane regions . It is the value assigned to the CONTROL_PLANE_LOCATION environment variable in Step 2: Create an organization .

ENVIRONMENT_GROUP_NAME

The name of the environment group your environments are assigned to. This is the group you created in Project and org setup - Step 3: Create an environment group . This is the value assigned to the environment variable ENV_GROUP .

PATH_TO_CERT_FILE
PATH_TO_KEY_FILE

Enter the path and filename of the self-signed TLS key and certificate files that you generated previously in Step 5: Create TLS certificates . These files must be located in the

 APIGEE_HELM_CHARTS_HOME/apigee-virtualhosts/certs

directory. For example: sslCertPath : certs / keystore . crt sslKeyPath : certs / keystore . key

INGRESS_NAME

The name of the Apigee ingress gateway for your deployment. This can be any name that meets the following requirements:

Have a maximum length of 17 characters
Contain only lowercase alphanumeric characters, '-' or '.'
Start with an alphanumeric character
End with an alphanumeric character

See ingressGateways[].name in the Configuration property reference

SVC_ANNOTATIONS_KEY : SVC_ANNOTATIONS_VALUE

(Optional). This is a key-value pair that provides annotations for your default ingress service. Your cloud platform uses annotations to help configure your hybrid installation, for example setting the loadbalancer type to either internal or external.

Annotations vary from platform to platform. Refer to your platform documentation for required and suggested annotations.

Note: You do not need to set svcAnnotations if you are creating your own Kubernetes service for ingress deployment as documented in Expose Apigee ingress gateway .

Comment out or delete this section if you are not using it.

SVC_LOAD_BALANCER_IP

(Optional). An IP address you have reserved for your load balancer. On platforms that support specifying the load balancer IP address, the load balancer will be created with this IP address. On platforms that do not allow you to specify the load balancer IP, this property is ignored.

Note: You do not need to set LoadBalancerIP if you are creating your own Kubernetes service for ingress deployment as documented in Expose Apigee ingress gateway . In production installations, it is recommended to create your own Kubernetes service.

Comment out or delete this section if you are not using it.

ENVIRONMENT_NAME

Use the same name that you used when you created an environment in the UI, as explained in Project and org setup - Step 3: Create an environment group .

*_SERVICE_ACCOUNT_FILEPATH

The path and filename account of the service account JSON files in your corresponding chart directory. Provide the names with the path relative to the chart directory. For example:

If the my-hybrid-project-apigee-synchronizer.json file resides in the apigee-env/ chart directory, you only need to provide the file name, such as:
```
synchronizer:  "my-hybrid-project-apigee-synchronizer.json"
```
If the file resides in a apigee-env/service-accounts/ directory, you would specify a relative path:
```
synchronizer:  "service-accounts/my-hybrid-project-apigee-synchronizer.json"
```

For non-production environments, the name of the single service account is PROJECT_ID -non-prod.json by default.

For production environments, the name of the service account key file that you generated with the create-service-account tool in Step 4: Create service accounts .

You can see the service account files in each corresponding chart directory.

The default names of the and corresponding chart directories for the service accounts are:

Service account	file name	Chart directory
Storage Object Admin	`PROJECT_ID -apigee-cassandra.json`	`apigee-datastore/`
Logs Writer	`PROJECT_ID -apigee-logger.json`	`apigee-telemetry/`
Apigee Connect Agent	`PROJECT_ID -apigee-mart.json`	`apigee-org/`
Monitoring Metric Writer	`PROJECT_ID -apigee-metrics.json`	`apigee-telemetry/`
No role required	`PROJECT_ID -apigee-runtime.json`	`apigee-env/`
Apigee Synchronizer Manager	`PROJECT_ID -apigee-synchronizer.json`	`apigee-env/`
Apigee Analytics Agent	`PROJECT_ID -apigee-udca.json`	`apigee-org/`
Apigee Runtime Agent	`PROJECT_ID -apigee-watcher.json`	`apigee-org/`

Note: Both mart and connectAgent use the apigee-mart service account.

*_SERVICE_ACCOUNT_EMAIL

The service account email addresses for the Google service accounts (GSA) you need to supply if you are using Workload Identity on GKE . These are the service accounts you created in Step 4: Create service accounts . You can find the email addresses for the service accounts with the following command:

gcloud iam service-accounts list --project ${PROJECT_ID} --filter "apigee"

Summary

The configuration file tells Kubernetes how to deploy the hybrid components to a cluster. Next, you will enable synchronizer access so the Apigee runtime and management planes will be able to communicate.

Next step

1 2 3 4 5 6 (NEXT) Step 7: Enable Synchronizer access 8 9 10 11 12

Step 6: Create the overrides Stay organized with collections Save and categorize content based on your preferences.

Specify configuration overrides

Before you begin

Configure the cluster

Production

Non-prod

Prod: Workload Identity

Non-prod: Workload Identity

Example

Summary

Next step

Step 6: Create the overrides