The best MagSafe battery packs of 2026: Keep your iPhone charged everywhere, all the time
We've tested dozens of magnetic power banks recently and just found our new top pick.
If you buy something through a link in this article, we may earn commission.
Using a cable to charge your phone with a power bank is fine. But if you'd like to easily use your phone while doing so, things can get a little awkward. A MagSafe battery pack snaps onto the little ring of magnets on the back of your iPhone (12 and later). There, it conveniently charges your phone without getting in the way. After trying out dozens of magnetic power banks, we've come up with our favorite: the Iniu Snap Go 10K . It supports the latest Qi2 25W charging standard and combines a slim design with a good price. We have other picks for the best MagSafe battery packs too — any one of these will get your phone refilled in, well, a snap.
In this story
Looking for other MagSafe accessories? We tested a bunch of those, too .
Best MagSafe battery packs for 2026
Capacity: 10,000mAh | Ports: 2 x USB-C, USB-C cable lanyard | Qi2-certified: Yes, 25W | Warranty: 3 years
The new Iniu Snap Go 10K adds a digital display readout and the new Qi2 25w charging standard into the mix. Combined with its ultra slim profile and quite reasonable $70 starting price (and it's often on sale), it's easily the best MagSafe power we've tested so far.
It's so slim, at first I thought it was a 5,000 mAh battery. But nope, it packs 10,000 mAh (in two 5,000 mAh cells). Holding it next to another 10K, Qi2 25W MagSafe bank that came out just last year, the Iniu is nearly half the size, which makes it far more comfortable to use while it charges a phone.
It includes a small digital display to tell you the remaining charge and has two USB-C ports with a max output of 45W. While there's not an integrated cable, it has an attached lanyard that uses a USB-C cable as its loop. That means you always have a way to connect your USB-C devices, it just takes one extra step to plug both ends in.
The Snap Go is speedy, too. In just 43 minutes it gave an iPhone 16 (which supports 25W wireless speeds, like the iPhone 17) a 55% boost, getting it all the way to 100% in under two hours. That's nearly a half hour less than our former best overall pick.
The only thing it lacks is a little stand, which some of these packs have, but for the price, speed and compact design, I can let that minor lack slide. Plus it's got a nearly unheard of three-year warranty .
- Remarkably compact
- On-board display
- 3-year warranty
- No stand
- Included cable isn't built-in
Capacity:10,000mAh | Ports:1 USB-C, 1 USB Type-A | Qi2-certified:No | Warranty:1 year
Why settle for charging just your iPhone when you can also charge your AirPods and/or Apple Watch? This power bank can handle all three — not simultaneously, of course, but it does have a pair of USB ports for plugging in other devices.
It also looks really cool, with orange accents and an industrial design. One of those accents is a fold-out ring stand that can rotate 360 degrees (and makes a satisfying clicky sound as you turn it). There's even a USB-C cable (for external-device charging) that doubles as a finger strap — pretty ingenious.
Another great perk: The folding AC prongs that let you recharge the charger by plugging it directly into an outlet. This is without question one of my favorite MagSafe battery packs to date; only its lack of Qi2 certification keeps it from earning our "best overall" pick. — Rick Broida, Senior Technology Writer
- Snazzy looks
- Low price
- Plugs directly into wall outlet for recharging
- Can also recharge Apple Watch and AirPods
- Not Qi2-certified
Capacity: 10,000mAh | Ports: 1 x USB-C, 1x USB-C cable | Qi2-certified: Yes, 25W | Warranty: 18 mo.
The Baseus Picogo AM52 is the most compact 10,000 mAh bank I've tested. Technically, it's a little thicker than our top Iniu pick, but is smaller in length and height. It too supports the latest Qi2 technology and has a built-in USB-C cable that can output a max of 45W. Just note that if you use the cable to charge something, the wireless pad turns off. You can push the button to turn it back on, but I've found it's better to just charge one thing at a time if possible.
As for speed, it matched our top pick for a full refill, getting the tester iPhone 16 from near dead to full in about an hour and 50 minutes. A 57 percent boost took 41 minutes — all while attaching to the phone in a rather unobtrusive way.
There's no display. Instead, four lighted pips tell you approximately how much charge remains in the tank. There's no kickstand either, which I'm not sure I'll miss that much — it charges so quickly that my phone wasn't away from its usual MagSafe stand for long.
- Super compact
- Supports Qi2 25W charging speeds
- Good price
- No display
- No stand
Capacity:10,000mAh | Ports:1 USB-C, 1 USB Type-A, 1 Lightning | Qi2-certified:No | Warranty:1 year
As budget battery packs go, it's hard to beat this versatile offering from Azmuth. Typically on sale for under $30, it features a pair of built-in USB-C cords in addition to its MagSafe charging pad. That means you can easily charge two additional devices without having to bring along extra cables.
And with both Type-A and USB-C ports underneath, that brings the simultaneous-device-charging tally up to five. I also like the built-in kickstand and LCD status display, the latter always preferable to the typical tiny-LED battery gauge.
To recharge the battery pack itself, you can use a USB-C or the onboard Lightning port, the latter a nice option for owners of older iPhone/iPad cords and chargers. — Rick Broida, Senior Technology Writer
- Low price
- Can charge up to five devices simultaneously
- Dual built-in USB-C cables
- Integrated kickstand and status display
- Can recharge via USB-C or Lightning
- Magnet could be a little stronger
- Not Qi2-certified
Capacity: 5,000mAh | Ports: 1 x USB-C | Qi2- certified: No | Warranty: 2 years
Semi-solid state power banks are a relatively new addition to the market. Instead of using a liquid electrolyte to ferry ions between the two electrodes, it uses a semi-solid, often ceramic, slurry. While that may not seem like anything to get excited about, the semi-solid state is actually much safer and not as prone to mishaps like catching fire when punctured. They can also store more energy per gram than standard battery counterparts.
When I tested this simple semi-solid bank from Statik , I was surprised by its performance. It wirelessly boosted an iPhone from near dead to 100 percent — that's something that no other 5,000 mAh battery has been able to do in my experience. Most other MagSafe portable chargers at that capacity top out at a 80 to 90 percent iPhone refill. Of course, I didn't have the heart (or courage) to put it through harsh physical treatment to test the safety claims — but I can say it arrived at my house in a sorrowfully beat-up box and its performance was solid.
It's not the fastest bank I've tried, but it's slim and compact and the MagSafe attachment points are firm. Chances are, most battery banks will at some point shift over to the new tech — this is a great one to try if you want to see the future of the category. — Amy Skorheim, Senior Reporter
- Semi-solid state tech is safer
- Delivers a highly efficient charge
- More expensive than other 5,000 mAh batteries
- Fairly drab design
Capacity:10,500mAh | Ports:2 USB-C, 1 USB Type-A | Qi2-certified:Yes | Warranty:99 years
The InfinaCore P3 Pro is part mobile charger, part wall charger: It can plug right into an AC outlet by way of its folding prongs. That means you don't have to pack a separate AC adapter, which is awesome. (On the other hand, this is a pretty chunky battery to piggyback on your phone, especially if you're actively using it.)
I also like the integrated "spec deck" status screen that shows available power, time to charge, input/output activity and even the device's own temperature. The display rotates so you can always read it, regardless of plug-in orientation, though it is on the small side, with pretty tiny text.
Even so, this is great for travel, a sort of one-size-fits-all solution. — Rick Broida, Senior Technology Writer
- Can charge up to four devices at once
- Built-in folding prongs for easy wall charging
- International adapter plugs included
- Lifetime warranty
- Expensive
- 65-watt output available only when it's plugged in
- Display is small and hard to read
Capacity: 5,000mAh | Ports: 1 x USB-C | Qi2- certified: Yes | Warranty: 2 years
When Apple came out with the ( already discontinued? ) iPhone Air in late 2025, it introduced a companion MagSafe battery pack to compensate for the ultra-thin phone's shorter battery life. Unfortunately, it costs $100 for just 3,000 mAh of energy capacity. The Nano Slim from Anker is a much better deal. It packs a full 5,000 mAh capacity and goes for $55 (sometimes as low as $45 depending on color and discounts). It's even rated higher than Apple's version, with Qi2-certified 15-watt charging; the Air battery maxes out at 12 watts unless connected to a wall charger.
But enough about how it compares to an over-priced accessory — it's a good power bank in its own right. It's got a smooth matte texture that feels nice and it comes in white, orange, mint green and a soft "golden" hue in addition to standard-issue black. The charge it delivers isn't super fast, but it got an iPhone 15 from 5 to 56 percent in an hour and 15 minutes. And since it's barely noticeable when attached, that's not bad. — Amy Skorheim, Senior Reporter
- Remarkably slim
- More affordable than Apple's model
- Charging is slow
Other MagSafe battery packs we tested
The Sharge IceMag3 is one of the cooler-looking banks we've tried.
(Amy Skorheim / Yahoo Tech)Sharge ICEMAG 3 power bank
The Sharge ICEMAG 3 is one cool power bank — both temperature-wise and how it looks. A tiny fan inside kicks on as it charges your phone to help with heat dispersion. It was audible but not annoying — just a low hum — and the battery did stay relatively cool, though not significantly more so than other banks with good internal regulation. It's got a 10,000 mAh capacity, a built-in cable, a sturdy stand and a cool windowed section that lets you peek at some of the internal works.
Unfortunately, it turned itself off halfway through my testing, so I didn't get an accurate reading of its performance. I'll test it again to see if that was a fluke and update this guide once I do.
Anker MagGo A1654
Striking the right balance of capacity, performance and support, the Anker MagGo A1654 was our former pick for the best overall MagSafe battery pack. The display shows the battery level and remaining usage time and the integrated kickstand lets you view your phone hands-free whilst it charges. It's Qi2 certified, delivering a speedy 15W wirelessly (and up to 27W with a cable) and the 10,000 mAh capacity gave our tester iPhone one full charge plus another 70%. But now that Qi2 25W technology has arrived, it's simply no longer the most current battery you can buy.
UGreen MagFlow Qi2 25W
UGreen's MagFlow power bank was the first Qi2 25W battery packs we tried. At the time it ranked among one of the better ones, but as more brands gained certification and released more compact batteries, this one was eventually dethroned. It has a built-in digital display and an attached USB-C cable. It wirelessly charged an iPhone 16 from five percent to half full in 30 minutes. And if you need an even faster boost, the built-in cable can crank out up to 30 watts. The battery's 10,000 mAh capacity is enough to fill a phone 1.5 times.
Factors to consider when choosing a MagSafe battery pack
-
Capacity:The capacity of a MagSafe battery pack — measured in millampere-hours (or mAh) — is perhaps the single most important consideration. The higher the number, the more juice the battery has, meaning more charges for your phones. But, that also means a thicker, heavier power bank. As you'll note above, the typical capacities these days are 5,000 or 10,000 mAh.
-
Number of ports:A battery pack will usually have at least one USB-C port for recharging its own battery, but you can also use that port to charge a device other than your iPhone. A few add a USB Type-A port into the mix for compatibility with older devices.
-
Qi2 technology:A battery pack that's Qi2-certified has been tested and approved by the Wireless Power Consortium (WPC) to meet specific standards for safety, performance, and interoperability. That means faster and more efficient charging and less risk of overheating.
-
Qi2 25Wis the latest standard uping wireless charging speeds to 25W. Just remember that the phone itself must be Qi2 25W-certified, to achieve those speeds. Right now, that includes the iPhone 16 or 17 series updated to iOS 26 , and the Google Pixel 10 Pro XL.
-
-
Warranty:Batteries don't last forever, so having a battery pack with a longer warranty can be beneficial. Some include up to 24 months of warranty coverage, while others cover you for only 6 months. You'll want to read through the warranty to understand what's covered and what isn't covered.
MagSafe battery pack FAQs
How many charges will a MagSafe power bank deliver?
Nearly all MagSafe power banks have a 5,000 mAh or 10,000 mAh capacity. The smaller of those will give a standard-sized smartphone a partial charge (between 70 and 80 percentage points). The 10K banks will deliver about one and a half charges.
It seems logical that a 5,000 mAh power bank will deliver a full charge to smartphones, which typically have batteries in the range of around 4,000 mAh. But thanks to the voltage conversion required to transfer the charge and other factors like heat dissipation, there's a lot of lost energy in the transfer.
What iPhone models are compatible with MagSafe battery packs?
iPhones 12 and later are MagSafe compatible, with the exception of the iPhone SE models and the iPhone 16e. The iPhone 17e corrected that omission by supporting MagSafe.
Will MagSafe battery packs work with Android phones?
Many Android phones support wireless charging, but very few also support the magnetic attachment you get with Apple 's MagSafe tech. Google's Pixel 10 series phones support wireless charging and magnetic alignment, which Google branded as Pixelsnap. Most of the batteries here should work with those phones, but we didn't test them on those handsets.
With a magnetic case, older Pixels and other Android phones may also work with these wireless power banks — but note that some phones (like my Samsung Galaxy S26 Ultra) have a camera array that gets in the way of the power bank attaching properly.
Do MagSafe battery packs work with phone cases?
If the case is listed as MagSafe compatible, there shouldn't be an issue using a wireless charger with the case on. Some thin plastic or silicone cases that aren't necessarily MagSafe-rated may work with a MagSafe power bank, but the magnetic attachment won't be as strong. Thick cases and cases with metal may impede charging.
Can I bring a MagSafe power bank on an airplane?
Currently, lithium ion batteries (which all MagSafe power banks are) can be taken through TSA checkpoints if they have a capacity of less than 100Wh (around 27,000 mAh). Most of the recommendations here are well under that limit at 10,000 mAh.
Thanks to cabin fires caused by battery packs that grounded a few flights, some airlines prohibit these accessories altogether, while others require the battery and your phone to be in clear view when charging — that's a good idea regardless.
Check with your airline before flight and remember that no power banks are allowed in checked luggage.
