Collect Forcepoint Proxy logs

Supported in:

Google secops SIEM

This document explains how to ingest Forcepoint Proxy logs to Google Security Operations by using Bindplane. The parser first cleans up the input log message and extracts key-value pairs using grok patterns and regular expressions. Then, it maps the extracted fields to the Unified Data Model (UDM) based on specific conditions and field values, handling various log formats and edge cases to ensure consistent data representation.

Before you begin

Ensure that you have a Google Security Operations instance.
Ensure that you are using Windows 2016 or later, or a Linux host with systemd .
If running behind a proxy, ensure firewall ports are open.
Ensure that you have privileged access to Forcepoint Proxy.

Get Google SecOps ingestion authentication file

Sign in to the Google SecOps console.
Go to SIEM Settings > Collection Agents.
Download the Ingestion Authentication File. Save the file securely on the system where Bindplane will be installed.

Get Google SecOps customer ID

Sign in to the Google SecOps console.
Go to SIEM Settings > Profile.
Copy and save the Customer IDfrom the Organization Detailssection.

Install the Bindplane agent

Windows installation

Open the Command Promptor PowerShellas an administrator.

Run the following command:

  msiexec 
  
 / 
 i 
  
 "https://github.com/observIQ/bindplane-agent/releases/latest/download/observiq-otel-collector.msi" 
  
 / 
 quiet

Linux installation

Open a terminal with root or sudo privileges.

Run the following command:

 sudo  
sh  
-c  
 " 
 $( 
curl  
-fsSlL  
https://github.com/observiq/bindplane-agent/releases/latest/download/install_unix.sh ) 
 " 
  
install_unix.sh

Additional installation resources

For additional installation options, consult this installation guide .

Configure the Bindplane agent to ingest Syslog and send to Google SecOps

Access the configuration file:
1. Locate the config.yaml file. Typically, it's in the /etc/bindplane-agent/ directory on Linux or in the installation directory on Windows.
2. Open the file using a text editor (for example, nano , vi , or Notepad).

Edit the config.yaml file as follows:

  receivers 
 : 
  
 udplog 
 : 
  
 # Replace the port and IP address as required 
  
 listen_address 
 : 
  
 "0.0.0.0:514" 
 exporters 
 : 
  
 chronicle/chronicle_w_labels 
 : 
  
 compression 
 : 
  
 gzip 
  
 # Adjust the path to the credentials file you downloaded in Step 1 
  
 creds 
 : 
  
 '/path/to/ingestion-authentication-file.json' 
  
 # Replace with your actual customer ID from Step 2 
  
 customer_id 
 : 
  
< customer_id 
>  
 endpoint 
 : 
  
 malachiteingestion-pa.googleapis.com 
  
 # Add optional ingestion labels for better organization 
  
 ingestion_labels 
 : 
  
 log_type 
 : 
  
 FORCEPOINT_WEBPROXY 
  
 raw_log_field 
 : 
  
 body 
 service 
 : 
  
 pipelines 
 : 
  
 logs/source0__chronicle_w_labels-0 
 : 
  
 receivers 
 : 
  
 - 
  
 udplog 
  
 exporters 
 : 
  
 - 
  
 chronicle/chronicle_w_labels

Replace the port and IP address as required in your infrastructure.
Replace <customer_id> with the actual customer ID.
Update /path/to/ingestion-authentication-file.json to the path where the authentication file was saved in the Get Google SecOps ingestion authentication file section.

Restart the Bindplane agent to apply the changes

To restart the Bindplane agent in Linux, run the following command:
```
 sudo  
systemctl  
restart  
bindplane-agent 
```
To restart the Bindplane agent in Windows, you can either use the Servicesconsole or enter the following command:
```
 net stop BindPlaneAgent && net start BindPlaneAgent 
```

Configure Forcepoint Web Security Suite

Sign in to the Forcepoint console.
Go to Web > Settings > General.
Click SIEM integration.
Select the Enable SIEM integration for this policy servercheckbox.
Provide the following configuration details:
- IP address or hostname: enter the IP address of the Bindplane agent.
- Port number: enter the port number configured on the Bindplane agent; for example, 514 .
- Transport protocol: select the UDPprotocol.
- SIEM format: select Syslog/CEF (Arcsight).
Click Ok.
Click Save and deploy.

UDM Mapping Table

Log Field	UDM Mapping	Logic
action	security_result.summary	If action_msg is not empty, it is mapped to security_result.summary. Otherwise, if action is not empty, it is mapped to security_result.summary. Otherwise, if act is not empty, it is mapped to security_result.summary.
action_msg	security_result.summary	If action_msg is not empty, it is mapped to security_result.summary. Otherwise, if action is not empty, it is mapped to security_result.summary. Otherwise, if act is not empty, it is mapped to security_result.summary.
app	target.application	If destinationServiceName is not empty, it is mapped to app_name. Otherwise, if app is not empty and does not contain `http` or `HTTP` , it is mapped to app_name. Finally, app_name is mapped to target.application.
bytes_in	network.received_bytes	If in is not empty, it is mapped to bytes_in. Finally, bytes_in is mapped to network.received_bytes.
bytes_out	network.sent_bytes	If out is not empty, it is mapped to bytes_out. Finally, bytes_out is mapped to network.sent_bytes.
cat	security_result.category_details	If cat is not empty, it is mapped to category. Finally, category is mapped to security_result.category_details.
cn1	security_result.detection_fields.value	If cn1 is not empty, it is mapped to security_result.detection_fields.value with key `Disposition Number` .
ContentType	target.file.mime_type	If contentType is not empty, it is mapped to ContentType. Finally, ContentType is mapped to target.file.mime_type.
cs1	target_role.description	cs1 is mapped to target_role.description.
cs2	security_result.category_details	If cs2 is not empty and not `0` , it is mapped to security_result.category_details with the prefix `Dynamic Category:` .
cs3	target.file.mime_type	cs3 is mapped to target.file.mime_type.
description	metadata.description	If description is not empty, it is mapped to metadata.description.
destinationServiceName	target.application	If destinationServiceName is not empty, it is mapped to app_name. Finally, app_name is mapped to target.application.
deviceFacility	metadata.product_event_type	If product_event and deviceFacility are not empty, they are concatenated with `-` and mapped to metadata.product_event_type. Otherwise, product_event is mapped to metadata.product_event_type.
disposition	security_result.detection_fields.value	If disposition is not empty, it is mapped to security_result.detection_fields.value with key `Disposition Number` .
dst	target.ip	If dst is not empty and dvchost is empty, it is mapped to dst_ip. Finally, dst_ip is mapped to target.ip.
dst_host	target.hostname	If dst is not empty and dvchost is empty, it is mapped to dst_host. Finally, dst_host is mapped to target.hostname.
dst_ip	target.ip	If dst is not empty and dvchost is empty, it is mapped to dst_ip. Finally, dst_ip is mapped to target.ip.
dst_port	target.port	If dst is not empty and dvchost is empty, it is mapped to dst_port. Finally, dst_port is mapped to target.port.
duration	network.session_duration.seconds	If duration is not empty and not `0` , it is mapped to network.session_duration.seconds.
dvchost	intermediary.ip	If dvchost is not empty, it is mapped to int_ip. Finally, int_ip is mapped to intermediary.ip if it is a valid IP address, otherwise it is mapped to intermediary.hostname.
file_path	target.file.full_path	If file_path is not empty, it is mapped to target.file.full_path.
host	principal.ip	If host is not empty, it is mapped to src. Finally, src is mapped to principal.ip.
http_method	network.http.method	If requestMethod is not empty, it is mapped to http_method. Otherwise, if method is not empty, it is mapped to http_method. Finally, http_method is mapped to network.http.method.
http_proxy_status_code	network.http.response_code	If http_response is empty or `0` or `-` , and http_proxy_status_code is not empty, it is mapped to network.http.response_code.
http_response	network.http.response_code	If http_response is not empty and not `0` and not `-` , it is mapped to network.http.response_code.
http_user_agent	network.http.user_agent	If http_user_agent is not empty and not `-` it is mapped to network.http.user_agent.
in	network.received_bytes	If in is not empty, it is mapped to bytes_in. Finally, bytes_in is mapped to network.received_bytes.
int_host	intermediary.hostname	If int_ip is not empty and int_host is not empty and different from int_ip, it is mapped to intermediary.hostname.
int_ip	intermediary.ip	If dvchost is not empty, it is mapped to int_ip. Finally, int_ip is mapped to intermediary.ip if it is a valid IP address, otherwise it is mapped to intermediary.hostname.
level	target_role.name	If level is not empty and role is empty, it is mapped to role. Finally, role is mapped to target_role.name.
log_level	security_result.severity	If severity is `1` or log_level contains `info` or message contains `notice` , security_result.severity is set to `INFORMATIONAL` . If severity is `7` , security_result.severity is set to `HIGH` .
loginID	principal.user.userid	If loginID is not empty, it is mapped to user. Finally, if user is not empty and not `-` , and does not contain `LDAP` , it is mapped to principal.user.userid.
method	network.http.method	If requestMethod is not empty, it is mapped to http_method. Otherwise, if method is not empty, it is mapped to http_method. Finally, http_method is mapped to network.http.method.
NatRuleId	security_result.detection_fields.value	If NatRuleId is not empty, it is mapped to security_result.detection_fields.value with key `NatRuleId` .
out	network.sent_bytes	If out is not empty, it is mapped to bytes_out. Finally, bytes_out is mapped to network.sent_bytes.
pid	target.process.pid	If pid is not empty, it is mapped to target.process.pid.
policy	target_role.description	If Policy is not empty, it is mapped to policy. If policy is not empty and not `-` , it is mapped to target_role.description.
Policy	target_role.description	If Policy is not empty, it is mapped to policy. If policy is not empty and not `-` , it is mapped to target_role.description.
product_event	metadata.product_event_type	If product is not empty, it is mapped to product_event. If product_event and deviceFacility are not empty, they are concatenated with `-` and mapped to metadata.product_event_type. Otherwise, product_event is mapped to metadata.product_event_type.
proxyStatus-code	network.http.response_code	If http_response is empty or `0` or `-` , and http_proxy_status_code is empty and proxyStatus-code is not empty, it is mapped to network.http.response_code.
refererUrl	network.http.referral_url	If refererUrl is not empty and not `-` , it is mapped to network.http.referral_url.
requestClientApplication	network.http.user_agent	If requestMethod is not empty, it is mapped to http_user_agent. Finally, http_user_agent is mapped to network.http.user_agent.
requestMethod	network.http.method	If requestMethod is not empty, it is mapped to http_method. Finally, http_method is mapped to network.http.method.
role	target_role.name	If level is not empty and role is empty, it is mapped to role. Finally, role is mapped to target_role.name.
RuleID	security_result.rule_id	If RuleID is not empty, it is mapped to security_result.rule_id.
serverStatus-code	network.http.response_code	If http_response is empty or `0` or `-` , and http_proxy_status_code is empty and proxyStatus-code is not empty, it is mapped to network.http.response_code.
severity	security_result.severity	If severity is `1` or log_level contains `info` or message contains `notice` , security_result.severity is set to `INFORMATIONAL` . If severity is `7` , security_result.severity is set to `HIGH` .
spt	principal.port	If spt is not empty, it is mapped to src_port. Finally, src_port is mapped to principal.port.
src	principal.ip	If src_host is not empty, it is mapped to source_ip_temp. If source_ip_temp is a valid IP address and src is empty, it is mapped to src. If host is not empty, it is mapped to src. Finally, src is mapped to principal.ip.
src_host	principal.hostname	If src_host is not empty, it is mapped to source_ip_temp. If source_ip_temp is not a valid IP address, it is mapped to principal.hostname. If source_ip_temp is a valid IP address and src is empty, it is mapped to src. Finally, src is mapped to principal.ip.
src_port	principal.port	If src_port is not empty, it is mapped to principal.port.
suser	principal.user.userid	If loginID is not empty, it is mapped to user. If suser is not empty, it is mapped to user. Finally, if user is not empty and not `-` , and does not contain `LDAP` , it is mapped to principal.user.userid.
url	target.url	If url is not empty, it is mapped to target.url.
user	principal.user.userid	If loginID is not empty, it is mapped to user. If suser is not empty, it is mapped to user. Otherwise, if usrName is not empty, it is mapped to user. Finally, if user is not empty and not `-` , and does not contain `LDAP` , it is mapped to principal.user.userid.
usrName	principal.user.userid	If loginID is not empty, it is mapped to user. If suser is not empty, it is mapped to user. Otherwise, if usrName is not empty, it is mapped to user. Finally, if user is not empty and not `-` , and does not contain `LDAP` , it is mapped to principal.user.userid.
when	metadata.event_timestamp	If when is not empty, it is parsed and mapped to metadata.event_timestamp.
	metadata.log_type	The value `FORCEPOINT_WEBPROXY` is hardcoded into metadata.log_type.
	metadata.product_name	The value `Forcepoint Webproxy` is hardcoded into metadata.product_name.
	metadata.vendor_name	The value `Forcepoint` is hardcoded into metadata.vendor_name.
	network.application_protocol	If dst_port is `80` , network.application_protocol is set to `HTTP` . If dst_port is `443` , network.application_protocol is set to `HTTPS` .
	principal.user.group_identifiers	If user is not empty and not `-` and contains `LDAP` , the OU part of the user string is extracted and mapped to principal.user.group_identifiers.
	principal.user.user_display_name	If user is not empty and not `-` and contains `LDAP` , the username part of the user string is extracted and mapped to principal.user.user_display_name.
	security_result.action	If action_msg, action, or act are not empty, sec_action is set to `ALLOW` or `BLOCK` based on their values. Finally, sec_action is mapped to security_result.action.
	security_result.category_details	If cat is not empty, it is mapped to category. Finally, category is mapped to security_result.category_details. If cs2 is not empty and not `0` , it is mapped to security_result.category_details with the prefix `Dynamic Category:` .
	security_result.detection_fields.key	The value `Disposition Number` is hardcoded into security_result.detection_fields.key when mapping disposition or cn1. The value `NatRuleId` is hardcoded into security_result.detection_fields.key when mapping NatRuleId. The value `Category Number` is hardcoded into security_result.detection_fields.key when mapping category_no.
	security_result.severity	If severity is `1` or log_level contains `info` or message contains `notice` , security_result.severity is set to `INFORMATIONAL` . If severity is `7` , security_result.severity is set to `HIGH` .
	target_role.description	If Policy is not empty, it is mapped to policy. If policy is not empty and not `-` , it is mapped to target_role.description.
	target_role.name	If level is not empty and role is empty, it is mapped to role. Finally, role is mapped to target_role.name.
category_no	security_result.detection_fields.value	If category_no is not empty, it is mapped to security_result.detection_fields.value with key `Category Number` .

Need more help? Get answers from Community members and Google SecOps professionals.