Collect Proofpoint Email Filter logs

Supported in:

Google secops SIEM

This document explains how to ingest Proofpoint Email Filter logs to Google Security Operations using the Bindplane agent.

Proofpoint Email Protection (PPS) is an email security gateway that provides spam filtering, threat detection, and email policy enforcement. It supports syslog forwarding and CEF log integration for exporting security events and mail transaction logs.

Before you begin

Make sure you have the following prerequisites:

A Google SecOps instance
Windows Server 2016 or later, or Linux host with systemd
Network connectivity between the Bindplane agent and the Proofpoint Protection Server (PPS)
If running behind a proxy, ensure firewall ports are open per the Bindplane agent requirements
Privileged access to the Proofpoint Protection Server (PPS) management console with administrator permissions

Get Google SecOps ingestion authentication file

Sign in to the Google SecOps console.
Go to SIEM Settings > Collection Agents.
Download the Ingestion Authentication File.
Save the file securely on the system where Bindplane will be installed.

Note: This JSON file contains credentials for authenticating the Bindplane agent to Google SecOps.

Get Google SecOps customer ID

Sign in to the Google SecOps console.
Go to SIEM Settings > Profile.
Copy and save the Customer IDfrom the Organization Detailssection.

Note: The customer ID is required for configuring the Bindplane agent exporter.

Install the Bindplane agent

Install the Bindplane agent on your Windows or Linux operating system according to the following instructions.

Windows installation

Open Command Promptor PowerShellas an administrator.

Run the following command:

  msiexec 
  
 / 
 i 
  
 "https://github.com/observIQ/bindplane-agent/releases/latest/download/observiq-otel-collector.msi" 
  
 / 
 quiet

Wait for the installation to complete.
Verify the installation by running:
```
 sc query observiq-otel-collector 
```
The service should show as RUNNING.

Linux installation

Open a terminal with root or sudo privileges.

Run the following command:

 sudo  
sh  
-c  
 " 
 $( 
curl  
-fsSlL  
https://github.com/observiq/bindplane-agent/releases/latest/download/install_unix.sh ) 
 " 
  
install_unix.sh

Wait for the installation to complete.
Verify the installation by running:
```
 sudo  
systemctl  
status  
observiq-otel-collector 
```
The service should show as active (running).

Additional installation resources

For additional installation options and troubleshooting, see the Bindplane agent installation guide .

Configure the Bindplane agent to ingest syslog and send to Google SecOps

Locate the configuration file

Linux:

 sudo  
nano  
/opt/observiq-otel-collector/config.yaml

Windows:

 notepad "C:\Program Files\observIQ OpenTelemetry Collector\config.yaml"

Edit the configuration file

Replace the entire contents of config.yaml with the following configuration:

  receivers 
 : 
  
 tcplog 
 : 
  
 listen_address 
 : 
  
 "0.0.0.0:514" 
 exporters 
 : 
  
 chronicle/proofpoint_mail_filter 
 : 
  
 compression 
 : 
  
 gzip 
  
 creds_file_path 
 : 
  
 '<CREDS_FILE_PATH>' 
  
 customer_id 
 : 
  
 '<CUSTOMER_ID>' 
  
 endpoint 
 : 
  
< REGION_ENDPOINT 
>  
 log_type 
 : 
  
 PROOFPOINT_MAIL_FILTER 
  
 raw_log_field 
 : 
  
 body 
  
 ingestion_labels 
 : 
  
 env 
 : 
  
 production 
 service 
 : 
  
 pipelines 
 : 
  
 logs/proofpoint_mail_to_chronicle 
 : 
  
 receivers 
 : 
  
 - 
  
 tcplog 
  
 exporters 
 : 
  
 - 
  
 chronicle/proofpoint_mail_filter

Configuration parameters

Replace the following placeholders:

Receiver configuration:
- tcplog : Receives syslog over TCP. Use udplog if you configure UDP transport in PPS.
- 0.0.0.0:514 : Listens on all interfaces on port 514. Change the port if needed (for example, 1514 for non-root Linux).
Exporter configuration:
- <CREDS_FILE_PATH> : Full path to ingestion authentication file:
  - Linux: /etc/bindplane-agent/ingestion-auth.json
  - Windows: C:\Program Files\observIQ OpenTelemetry Collector\ingestion-auth.json
- <CUSTOMER_ID> : Customer ID from the Get Google SecOps customer IDstep.
- <REGION_ENDPOINT> : Regional endpoint URL:
  - US: malachiteingestion-pa.googleapis.com
  - Europe: europe-malachiteingestion-pa.googleapis.com
  - Asia: asia-southeast1-malachiteingestion-pa.googleapis.com
  - See Regional Endpoints for complete list.

Save the configuration file

After editing, save the file:
- Linux: Press Ctrl+O , then Enter , then Ctrl+X
- Windows: Click File > Save

Restart the Bindplane agent to apply the changes

To restart the Bindplane agent in Linux, run the following command:

 sudo  
systemctl  
restart  
observiq-otel-collector

Verify the service is running:

 sudo  
systemctl  
status  
observiq-otel-collector

Check logs for errors:

 sudo  
journalctl  
-u  
observiq-otel-collector  
-f

To restart the Bindplane agent in Windows, choose one of the following options:
- Command Prompt or PowerShell as administrator:
```
 net stop observiq-otel-collector && net start observiq-otel-collector 
```
- Services console:
  1. Press Win+R , type services.msc , and press Enter.
  2. Locate observIQ OpenTelemetry Collector.
  3. Right-click and select Restart.
  4. Verify the service is running:
```
 sc query observiq-otel-collector 
```
  5. Check logs for errors:
```
  type 
  
 "C:\Program Files\observIQ OpenTelemetry Collector\log\collector.log" 
 
```

Configure Proofpoint Email Protection syslog forwarding

Option 1: Configure syslog forwarding in Proofpoint PPS

Sign in to the Proofpoint Protection Server (PPS)management console.
Navigate to System > Logs and Reports > Log Settings.
In the Remote Log Settingssection, configure the following:
- Protocol: Select Syslog.
- Syslog server: Enter the IP address of the Bindplane agent host (for example, 192.168.1.100 ).
- Port: Enter 514 (must match the Bindplane agent receiver port).
- Transport: Select TCP(must match the Bindplane agent receiver configuration). TLS is also supported for secure forwarding.
In the Local Log Optionssection, configure the logging verbosity as needed.
Click Save Changes.

Note: Proofpoint on Demand (PoD) cloud deployments require an additional "Remote Syslog Forwarding" license to send logs from the cloud to an on-premises syslog server via TLS.

Option 2: Configure CEF log integration

Sign in to the Proofpoint Protection Server (PPS)management console.
Navigate to Configuration > Integrations > Integrated SIEM.
Click the SIEM Log Integrationtab.
Select Enable export to ArcSight formatto activate CEF log integration.
Configure the syslog destination server:
- Host: Enter the IP address of the Bindplane agent host (for example, 192.168.1.100 ).
- Port: Enter 514 (must match the Bindplane agent receiver port).
Click Save.
Verify that CEF-formatted logs are being received by checking the Bindplane agent logs.

UDM mapping table

Log Field	UDM Mapping	Logic
	about	Additional information about the event
adultscore, attachments, hops, routes, notroutes, eid, querydepth, selector, spamscore, phishscore, mod, status, folder	additional.fields	Vendor-specific event data that cannot be adequately represented within the formal sections of the UDM model
auth	extensions.auth.type	Authentication type used
	intermediary	Information about intermediary devices involved in the event
domain	intermediary.administrative_domain	Administrative domain of the intermediary
hops-ip, lip, interm_ip	intermediary.ip	IP address of the intermediary
	metadata.event_type	Type of event (e.g., USER_LOGIN, NETWORK_CONNECTION)
prod_event_type	metadata.product_event_type	Product-specific event type
engine	metadata.product_version	Version of the product that generated the event
proto, mailer	network.application_protocol	Application protocol used in the network connection
hfrom, from	network.email.from	Email sender address
m, msgid, net_mail_id, hdr_mid	network.email.mail_id	Unique identifier for the email message
subject	network.email.subject	Subject line of the email
to	network.email.to	Email recipient addresses
received_byte	network.received_bytes	Number of bytes received in the network connection
s	network.session_id	Unique identifier for the network session
cipher	network.tls.cipher	TLS cipher suite used
tls_version, version	network.tls.version	TLS version used
domain	principal.administrative_domain	Administrative domain of the principal
proc	principal.application	Application involved in the event
device, host	principal.asset.hostname	Hostname of the asset associated with the principal
ip, srcip	principal.asset.ip	IP address of the asset associated with the principal
guid	principal.asset_id	Unique identifier for the asset
device, host	principal.hostname	Hostname of the principal
ip, srcip	principal.ip	IP address of the principal
country	principal.location.country_or_region	Country or region of the principal's location
cmd	principal.process.command_line	Command line used to launch the process
file, name	principal.process.file.full_path	Full path of the file involved in the process
sz, size	principal.process.file.size	Size of the file in bytes
pid, process_id	principal.process.pid	Process ID
action, security_action	security_result.action	Action taken by the security product
classifier	security_result.category	Category of the security result
class, internalId	security_result.detection_fields	Fields used for detection
rule	security_result.rule_name	Name of the rule that triggered the security result
security_desc	security_result.summary	Summary of the security result
hostname	target.asset.hostname	Hostname of the asset associated with the target
hostname	target.hostname	Hostname of the target
	metadata.product_name	Name of the product that generated the event
	metadata.vendor_name	Name of the vendor that produced the product

Need more help? Get answers from Community members and Google SecOps professionals.