Collect Hillstone Firewall logs

Supported in:

Google secops SIEM

This document explains how to ingest Hillstone Firewall logs to Google Security Operations using Bindplane.

Hillstone Firewall is a next-generation firewall that provides advanced threat detection and prevention capabilities, application control, intrusion prevention, and policy automation. The firewall offers comprehensive security features including real-time threat protection, unified threat management, and intelligent policy operation to protect network infrastructure from known and unknown threats.

Before you begin

Make sure you have the following prerequisites:

A Google SecOps instance
Windows Server 2016 or later, or Linux host with systemd
Network connectivity between the Bindplane agent and Hillstone Firewall
If running behind a proxy, ensure firewall ports are open per the Bindplane agent requirements
Privileged access to the Hillstone Firewall management console or appliance
Administrative credentials for the Hillstone Firewall web interface

Get Google SecOps ingestion authentication file

Sign in to the Google SecOps console.
Go to SIEM Settings > Collection Agents.
Download the Ingestion Authentication File. Save the file securely on the system where Bindplane will be installed.

Get Google SecOps customer ID

Sign in to the Google SecOps console.
Go to SIEM Settings > Profile.
Copy and save the Customer IDfrom the Organization Detailssection.

Install the Bindplane agent

Install the Bindplane agent on your Windows or Linux operating system according to the following instructions.

Windows installation

Open Command Promptor PowerShellas an administrator.

Run the following command:

  msiexec 
  
 / 
 i 
  
 "https://github.com/observIQ/bindplane-agent/releases/latest/download/observiq-otel-collector.msi" 
  
 / 
 quiet

Wait for the installation to complete.
Verify the installation by running:
```
 sc query observiq-otel-collector 
```

The service should show as RUNNING.

Linux installation

Open a terminal with root or sudo privileges.

Run the following command:

 sudo  
sh  
-c  
 " 
 $( 
curl  
-fsSlL  
https://github.com/observiq/bindplane-agent/releases/latest/download/install_unix.sh ) 
 " 
  
install_unix.sh

Wait for the installation to complete.

Verify the installation by running:

 sudo  
systemctl  
status  
observiq-otel-collector

The service should show as active (running).

Additional installation resources

For additional installation options and troubleshooting, see Bindplane agent installation guide .

Configure the Bindplane agent to ingest syslog and send to Google SecOps

Locate the configuration file

Linux:

 sudo  
nano  
/etc/bindplane-agent/config.yaml

Windows:

 notepad "C:\Program Files\observIQ OpenTelemetry Collector\config.yaml"

Edit the configuration file

Replace the entire contents of config.yaml with the following configuration:

  receivers 
 : 
  
 udplog 
 : 
  
 listen_address 
 : 
  
 "0.0.0.0:514" 
 exporters 
 : 
  
 chronicle/hillstone_firewall 
 : 
  
 compression 
 : 
  
 gzip 
  
 creds_file_path 
 : 
  
 '/etc/bindplane-agent/ingestion-auth.json' 
  
 customer_id 
 : 
  
 'YOUR_CUSTOMER_ID' 
  
 endpoint 
 : 
  
 malachiteingestion-pa.googleapis.com 
  
 log_type 
 : 
  
 HILLSTONE_NGFW 
  
 raw_log_field 
 : 
  
 body 
  
 ingestion_labels 
 : 
  
 env 
 : 
  
 production 
  
 source 
 : 
  
 hillstone_firewall 
 service 
 : 
  
 pipelines 
 : 
  
 logs/hillstone_to_chronicle 
 : 
  
 receivers 
 : 
  
 - 
  
 udplog 
  
 exporters 
 : 
  
 - 
  
 chronicle/hillstone_firewall

Configuration parameters

Replace the following placeholders:

Receiver configuration:
- The receiver is configured to listen on UDP port 514 on all interfaces (0.0.0.0).
Exporter configuration:
- creds_file_path : Full path to ingestion authentication file:
  - Linux: /etc/bindplane-agent/ingestion-auth.json
  - Windows: C:\Program Files\observIQ OpenTelemetry Collector\ingestion-auth.json
- customer_id : Replace YOUR_CUSTOMER_ID with the Customer ID from the previous step.
- endpoint : Regional endpoint URL:
  - US: malachiteingestion-pa.googleapis.com
  - Europe: europe-malachiteingestion-pa.googleapis.com
  - Asia: asia-southeast1-malachiteingestion-pa.googleapis.com
  - See Regional Endpoints for a complete list.
- log_type : Set to HILLSTONE_NGFW exactly as shown.
- ingestion_labels : Optional labels in YAML format (customize as needed).

Save the configuration file

After editing, save the file:

Linux: Press Ctrl+O , then Enter , then Ctrl+X
Windows: Click File > Save

Restart the Bindplane agent to apply the changes

To restart the Bindplane agent in Linux, run the following command:

 sudo  
systemctl  
restart  
observiq-otel-collector

Verify the service is running:

   
sudo  
systemctl  
status  
observiq-otel-collector

Check logs for errors:

   
sudo  
journalctl  
-u  
observiq-otel-collector  
-f

To restart the Bindplane agent in Windows, choose one of the following options:
- Command Prompt or PowerShell as administrator:
```
 net stop observiq-otel-collector && net start observiq-otel-collector 
```
- Services console:
  1. Press Win+R , type services.msc , and press Enter.
  2. Locate observIQ OpenTelemetry Collector.
  3. Right-click and select Restart.
  4. Verify the service is running:
```
 sc query observiq-otel-collector 
```
  5. Check logs for errors:
```
  type 
  
 "C:\Program Files\observIQ OpenTelemetry Collector\log\collector.log" 
 
```

Configure Hillstone Firewall syslog forwarding

Create a syslog server

Sign in to the Hillstone Firewall web interface.
Go to Log > Configuration > Syslog Serverto visit the Syslog Server List page.
Click Newto create a new syslog server.
In the Syslog Server Configurationdialog, configure the following settings:
- Host name: Enter the IP address of the Bindplane agent host (for example, 192.168.1.100 ).
- Binding: Select Virtual Routerand then select a virtual router from the drop-down list, or select Source Interfaceand then select a source interface from the drop-down list.
- Protocol: Select UDPfrom the drop-down list.
- Port: Enter 514 .
- Log Type: Select the log types you want the syslog server to receive. Available log types include:
  - Event: System and administrative activity audits, routing and networking events.
  - Alarm: Urgent, alert, and critical severity logs.
  - Security: Security events such as attack defense and application security.
  - IPS: Network intrusion protection events.
  - Configuration: Configuration changes on command line interface.
  - Network: Network services operations such as PPPoE and DDNS.
  - Session: Session logs including protocols, source and destination IP addresses and ports.
  - NAT: NAT logs including NAT type, source and destination IP addresses and ports.
Click OKto save the syslog server configuration.

Enable log forwarding for each log type

Go to Log > Configuration > Logto visit the Log Configurationpage.
Click the tab of the log type you want to configure (for example, Event, Alarm, Security, IPS, Configuration, Network, Session, or NAT).
For each log type you want to forward:
1. Select the Enableto enable the log function.
2. Select the Syslog serverto export logs to the syslog server.
3. In the Lowest severitydrop-down list, select the lowest severity level. Logs below the severity level selected here won't be exported.
4. Click the All syslog serverslink to verify that your configured syslog server is listed.
Click OKto save the settings.
Repeat steps 2 through 4 for each log type you want to forward to Google SecOps.

Verify log forwarding

On the Bindplane agent host, verify that syslog messages are being received:

Linux:

 sudo  
journalctl  
-u  
observiq-otel-collector  
-f

Windows:

  type 
  
 "C:\Program Files\observIQ OpenTelemetry Collector\log\collector.log"

Look for log entries indicating successful receipt and forwarding of Hillstone Firewall logs.
After 5 to 10 minutes, verify that logs appear in the Google SecOps console.

UDM mapping table

Log Field	UDM Mapping	Logic
start_time_label, close_time_label, state_label, vr_label	additional.fields	Additional metadata fields
desc	metadata.description	Description of the event
	metadata.event_type	Type of event
	metadata.product_name	Product name
	metadata.vendor_name	Vendor name
protocol_number_src	network.ip_protocol	IP protocol used
receive_bytes	network.received_bytes	Number of bytes received
receive_packets	network.received_packets	Number of packets received
send_bytes	network.sent_bytes	Number of bytes sent
send_packets	network.sent_packets	Number of packets sent
session_id	network.session_id	Session identifier
host	principal.asset.hostname	Hostname of the principal asset
src_ip	principal.asset.ip	IP address of the principal asset
zone_val	principal.cloud.availability_zone	Cloud availability zone
host	principal.hostname	Hostname of the principal
src_ip	principal.ip	IP address of the principal
mac_address	principal.mac	MAC address of the principal
src_port	principal.port	Port number of the principal
ethernet_src_label	principal.resource.attribute.labels	Labels for principal resource attributes
id	principal.user.userid	User ID of the principal
dst_ip	target.asset.ip	IP address of the target asset
dst_ip	target.ip	IP address of the target
dst_port	target.port	Port number of the target
ethernet_dst_label	target.resource.attribute.labels	Labels for target resource attributes
policy	target.resource.name	Name of the target resource
policy	target.resource.type	Type of the target resource
user	target.user.userid	User ID of the target

Need more help? Get answers from Community members and Google SecOps professionals.